Problem with Screen Settings

While using FotoMagico version 1.8 I ran a slide show in full screen. After the slide show completed it changed my screen settings. The best way I can describe this problem is similar to Windows and using large fonts. The screen now scrolls. I can not find a way to change my screen setting back to it's original setting. Looking for help.
Hardware is a G5 PowerPC iMac
OS is 10.4.9
Thanks.

If FotoMagic is changing the screen resolutions each time you use it and not changing them back, then put the resolution settings in the menu bar. At least you can change them back easily. Go to Preferences-Displays. Check "Show Displays in Menu Bar". This will allow you to change the resolution by clicking on the Display icon. Some programs are not very good at putting things back the way they were.

Similar Messages

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

My iphone 5 have problem with screen

Dear Sir/Madam
My iphone 5 have problem with screen, i could not control sometime because it frozen and appear white cross line. I have restore my phone, but issue still there
I have same issue with this user on youtube http://www.youtube.com/watch?v=xpB7mqcWM1A
Please help to advices how can i do now
My Phone Information
Serial Number F17JRZ55DTTP
IOS 7.1.1(11D201)
Thank and Regards
Thanh

Hi, I use my phone carefully, did not drop it before. I restored it cause i think problem come from jealbreak or software. It still happen.
Currently, it is ok after i turned off the phone through night . Thank for your help

Problems with screen sharing

Upgraded three systems to Mountain Lion yesterday (Early 2011 MBP, Mid 2010 Mini and Mid 2011 Mini).
I rely on Screen Sharing to maintain the two Minis using the MBP. Now, while the Mid 2010 Mini can be accessed just fine, the same is not true for the Mid 2011 Mini. After a long delay, a window will pop up but is black. If I toggle between scaled and full screen a couple of times, the screen will be displayed but will accept no input. Odd.

I was able to resolve the problem with screen sharing from my MBP to my problematic Mini.
My home network uses a Belkin N600 dual band router with both the MBP and Mini using the faster N band. After switching the Mini to the slower band, screen sharing began working again. My other Mini that worked all along was hardwired to the router so was not an issue.
Oddly, with Lion, screen sharing worked having the MPB and Mini on the same N band.

NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

HT4623 problem with screen touch when during writing or opening icon the screen is flickering

I have problem with screen touch, when I touch the screen to write something or open icon the screen is flickering and keyboard or icons begin jumping

@ wesleyyin,
certainly strange. Some questions to help with the diagnostics;
Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
Can you try disabling the TrackPoint to see the problem goes away?
Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Problem with screen after update

hello,
I have a BB Passport and I have a problem after the last software update OS 10.3.1.1565
- the screen is flashing when i go into an application... This happens randomly... not every time. First I had this problem with Evernote. I erased everything from my phone and I performed a full wipe (factory reset). The problem is not solved. now is happening more often... when I go to settings, when I open an app... and so on. Usualy is flashing white screen, but last night when I wanted to watch a video, it flashed green screen...
Is there a way to solve this problem? Is this a software problem? Or I have to replace my screen?

http://www.blackberry.com/btsc/KB36757
There is a fix, though not officially released yet by BlackBerry:
http://forums.crackberry.com/bb10-leaked-beta-os-f395/os-10-3-1-2480-upgrade-files-passport-only-100...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Problem with Screen Painter - Graphical Layout Editor.

Hi Friends,
I have a strange problem with my Graphical Layout Editor. I first had the problem that the alphanumeric Editor gets displayed even the checkbox for Graphical Layout Editor is checked. Then I had gone through sdn forums and found that the eumfcdll.dll was missing.Thanks to sdn forums. When I copied that file into the path specified it worked fine. But the problem is my layout screen is not displayed fully. It is just displayed at the top of the window and only in that region I can drag and drop the elements. Remaining part of the window is uneditable.
what is the problem? Do I need to make any further settings?
Regards,
Raju.

try to re-install GUI patch .
Yeah , its like CNTLALTDEL(restart) , So half of the problems get resolved.
regards
prabhu
Message was edited by: Prabhu Peram

This is a tough one! Problem with sequence settings....

OK...where to begin!
Here is some background (I have posted many questions about these issues and have resolved most of them, except this project)
1.Recently upgraded to 6.0.1
2. 'lost' my scratch disc (ok, I accidently deleted it)
3. All projects are OK to do without, except this one!
4. The footage for this project was from 2 cameras: one is DV and one is HD. The HD footage was downgraded to DV during capture from camera for the original project. Now, with 6.0.1, I bring it in HD and mix the footage on the same timeline with the DV (which is so cool and so much easier for me!) But I wanted to make sure and do the same thing I did for the original clips on this project, so when I just batch captured all the clips, I brought the HD in as DV. Both were shot wide screen.
This one sequence is 6 minutes long and I COULD recreate it, but it is very detailed and has a lot of filters, edits, etc. Here is the problem:
I did a batch capture on all the clips and successfully got all the clips back and the timeline plays, but the two different "cameras" footage looks different in the canvas: (the sequence settings are frame size: ntsc dv 3:2, pixel aspect ratio ntsc-ccir601/dv and anormorphic is checked)
The HD footage, downgraded to DV, looks fine
The DV footage is stretched, and has a bar on the top and bottom.
I have played around with the sequence settings and these are the best results i can get.
Now I made a new sequence with same settings as above and i dragged a couple different clips from the browser into the timeline and they are fine... (these clips are the same ones in the problem sequence that look stretched)
Any ideas??
Thanks in advance!!

I understood that the sequence looked at the first stuff dropped into it for behavior. If you dropped the problem material from the first sequence into the second sequence you created prior to dropping any thing else in then it will behave as you would expect. if you dropped footage that wasn't formatted the same as your sequence settings you get the "...would you like to ..." and the sequence settings get changed. I avoid this because some of the changes applied don't allow my Kona to playout.

Satellite Pro L20 -can anyone tell me whether I have a problem with screen?

Hi,
I have a Pro L20 - PSL25E and i have recently been having problems with the screen, it has been intermittently flickering/losing colour and almost whiting out (when the colour fades white vertical lines start to appear).
This seemed to become worse after i dropped it (only from about 2 feet off the ground not a big drop).
I thought the sceen may be going, but the perfomance of the laptop seems to be affected when this is happening, the laptop has started to run very slow (the mouse tracks slow, programs I've clicked take ages to run and it sometimes freezes until it stops flickering) which had me thinking it might be a virus or perfomance issue.
My screen drivers are up to date, i ran a full scan with McAfee, ran a system clear-up and a defrag.
I was wondering if anyone knew whether this seemed like a problem with the screen connections and would need replacing or whether it could be repaired, or whether it was a perfomance issue?
Any help would be much appreciate thanks!
Rebecca.

Sounds like the Graphics chip has a problem, which I think is a Mainboard replacement.
You can get a quote for the repair at an Authorized Service Provider. There is an ASP list on the Toshiba website.

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

I'm having a minor problem with "screen drift" - the page moves slightly up and down when moving my mouse around the screen, and continues to do so after stoppi

I've installed the latest version of Shockwave, updated the driver from Logitech for my mouse (Logitech M525), tried both full screen and regular modes, restarted Firefox repeatedly. This drift is very annoying - I spend the majority of my time on FB - seems like the amount of drift varies from not at all to "damn it, I can't even place my mouse on an object without the screen moving".
I'm on Windows 7 with an Acer V5-671 laptop - help please!

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problems with screen saver image quality

Just got a MPB 15 inch. Very happy with it but have a small problem with the screen saver. I use my i Photo folders as the source for screen saver images. Some photos are shown in very good quality but others are very poor - as if low res. The original images are all of the same high quality. Seems to occur whichever video setting is used under power saving. A minor issue I now but any ideas?

Hi, Mark. Apparently some of the photos being used are low-resolution thumbnails, not full-resolution images.
What version of iPhoto do you have, and which OS version are you running? On my MBP running 10.5.6 and iPhoto 7.1.5, "All folders" is not an option in the Screensaver pane of System Prefs, so I don't know what you're actually choosing. But if I select "Pictures" (which refers to the Pictures folder in my Home folder), then the screensaver uses every .jpg file that it finds in any of the several iPhoto Libraries inside my Pictures folder. The thumbnails created by iPhoto are .jpgs, so they get used by the screensaver along with full-size high-resolution images.
The solution is not to select a folder that contains any thumbnails.

Mac pro problems with screen

my mac pro got problems with the screen it loocs like too many square and vertical lines also it dosen't start recently i just change the hard drive an when I tried to instal the sistem operative it just started those problems can someone help me what can i do?

Which Mac? what year, what model, what speed, what size screen e.g., 2006 MacBook Pro 5,1 2.95GHz 13" screen
What graphics card, if you know it.
What version of Mac OS X, e.g., 10.5.5?

Problem with Screen Settings

Similar Messages

Maybe you are looking for