Problem with screen zooms in by itself

I have a Nokia Lumia 625 and i m facing problem that the phone screen itself zooms in and i need to switch off to get back to actual scrren resolution
RD

darshik wrote:
I am also facing same problem of screen magnification. Even when i am not using and phone is in my pocket, after a while i take a look its dinosaur fonts screen.
phone is just 20 days old.
only solution is too restart, no other function works.
Did you try the solution provided in the post above yours ???

Similar Messages

Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
Buttons pressing themself...
Also, my main screen is permanently zoomed in...
suggestions?

Double tap the screen with THREE fingers, that should get it back to normal again.
Then go into Settings > General > Accessibility > Zoom > OFF.
Not too sure about the keyboard and random button presses though. Back it up and restore from iTunes, see if that fixes it.

My iphone 5 have problem with screen

Dear Sir/Madam
My iphone 5 have problem with screen, i could not control sometime because it frozen and appear white cross line. I have restore my phone, but issue still there
I have same issue with this user on youtube http://www.youtube.com/watch?v=xpB7mqcWM1A
Please help to advices how can i do now
My Phone Information
Serial Number F17JRZ55DTTP
IOS 7.1.1(11D201)
Thank and Regards
Thanh

Hi, I use my phone carefully, did not drop it before. I restored it cause i think problem come from jealbreak or software. It still happen.
Currently, it is ok after i turned off the phone through night . Thank for your help

Problems with screen sharing

Upgraded three systems to Mountain Lion yesterday (Early 2011 MBP, Mid 2010 Mini and Mid 2011 Mini).
I rely on Screen Sharing to maintain the two Minis using the MBP. Now, while the Mid 2010 Mini can be accessed just fine, the same is not true for the Mid 2011 Mini. After a long delay, a window will pop up but is black. If I toggle between scaled and full screen a couple of times, the screen will be displayed but will accept no input. Odd.

I was able to resolve the problem with screen sharing from my MBP to my problematic Mini.
My home network uses a Belkin N600 dual band router with both the MBP and Mini using the faster N band. After switching the Mini to the slower band, screen sharing began working again. My other Mini that worked all along was hardwired to the router so was not an issue.
Oddly, with Lion, screen sharing worked having the MPB and Mini on the same N band.

NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

HT4623 problem with screen touch when during writing or opening icon the screen is flickering

I have problem with screen touch, when I touch the screen to write something or open icon the screen is flickering and keyboard or icons begin jumping

@ wesleyyin,
certainly strange. Some questions to help with the diagnostics;
Which TrackPoint cap you you have on your keyboard, soft domed, soft rim or classic domed (the hairy one)?
Can you try disabling the TrackPoint to see the problem goes away?
Anything else laid on top of the system or between screen and keyboard like a thin cloth or something?
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Need help with screen zoom please

I just upgraded from Tiger to Leopard. When I had the old Tiger software installed, I was able to zoom in and out on my screen by holding down the Control key while scrolling with my mouse. But since I installed Leopard (not Snow Leopard, since I am using a G5 Tower PowerPC), this key combination no longer works. This former screen zoom feature is important to me because I am a graphic designer with a neurological condition (tremors in my hands) that makes selecting fine points in graphic applications (like Illustrator) difficult unless I zoom in to make selection points larger and more manageable. Note: using Illustrator's magnifying glass feature does not help me, because the select points still stay small when I magnify and image, but using the old screen zoom method made the points larger and easier for me to select. Can anyone help me?
F.Y.I. I also updated my trackball drivers as well, but my trackball preference settings did not change.

Thanks for your input. I hear what you are saying. I have found a couple of applications that worked better with my old Tiger system than with Leopard. When I contacted the developers of these mis-behaving apps, I learned that while Intel machines seem to have no problem with their app's Leopard updates, they do report problems with those of us who still use our old big honking tower PPC's. Maybe that is what I am experiencing here.

Satellite P100-202: problems with screen again

Hello everyone! I'm posting about a problem with my Toshiba P100-202's screen. I recently posted in the thread "Satellite P100-202: screen will freeze" and my current problem is actually quite similar to what is explained in the thread "Satellite P100-119: display doesn't work anymore". Here's my story, hoping that someone will be able to help me avoid having to send the computer to a technician:
After my previous problem I decided to get my screen replaced. Everything seemed fine, apart from on occaisonal instances, especially when I was using the program "Internet Explorer", in which the screen would sort of restart, ie. everything went black for a few seconds (music etc. however would continue) and then (boom) everything would reappear, sometimes in ultra-zoom for a second or two. The computer (operating system=Windows 7) would report "problem with NVIDIA graphics driver", and then operations would continue normally. This happened several times, although not frequently, and I wasn't too worried about it. And then, a few days ago, I was using the newest release candidate of Internet Explorer 9, and the screen blacked out, and my music continued, and I thought "OK, no problem", and then a few seconds passed, and then the music stopped (and I was thinking "uh-oh"), and then... the blue screen of death.
OK, no panic, restart, but of course there's no welcome note, no nothing, just a blank screen which with the backlights still working created an ominous greyish hue. And then suddenly the mouse appeared, followed by the entire display, so I unwisely dismissed the incident. Ten minutes later, same thing, and this time not even the blue screen of death as consolement, just the grey nothingness.
A few days of rest, a quick dusting of the battery compartment, but no, even though I believe the operating system is working fine (caps lock light works and little hums and whirrs occur as usual), there is no question about the fact that the screen does not work.
PS. Sorry if my post is too long and no, I do not have access to an external display!!
While I'm at it, is anyone able to explain why a 25-minute lasting battery can take hours or even days to charge?
Message was edited by: trrttrry

Thanks for your super-fast reply, as***! Unfortunately I fell asleep just before you posted. Anyway, indeed I was not expecting a manual fix to be available, so I'll see if I can find the installation disk in my ocean of cd-roms, and if that doesn't work I'll call up on a mechanic, see what they say (nowadays the most common answer is "rien faire", however I have a half-friend in the job who might be able to elaborate further), and in the event, give up on this one and go and buy a brand new and - as they now all are - webcam equipped laptop or netbook as you call them (and preferably not a Toshiba, either, unless you can convince me that 1. The battery no longer lasts a mere third-of-an-hour after three years of usage and 2. The screens are built to last a good ten years). After all, I've always been unlucky with electronics. The problem is however, how will I get all my files moved, knowing that the best form of back-up I have is a long-lost USB key?
PS. Keep me updated if you get any more information on a possible immediate cure!

Satellite Pro L20 -can anyone tell me whether I have a problem with screen?

Hi,
I have a Pro L20 - PSL25E and i have recently been having problems with the screen, it has been intermittently flickering/losing colour and almost whiting out (when the colour fades white vertical lines start to appear).
This seemed to become worse after i dropped it (only from about 2 feet off the ground not a big drop).
I thought the sceen may be going, but the perfomance of the laptop seems to be affected when this is happening, the laptop has started to run very slow (the mouse tracks slow, programs I've clicked take ages to run and it sometimes freezes until it stops flickering) which had me thinking it might be a virus or perfomance issue.
My screen drivers are up to date, i ran a full scan with McAfee, ran a system clear-up and a defrag.
I was wondering if anyone knew whether this seemed like a problem with the screen connections and would need replacing or whether it could be repaired, or whether it was a perfomance issue?
Any help would be much appreciate thanks!
Rebecca.

Sounds like the Graphics chip has a problem, which I think is a Mainboard replacement.
You can get a quote for the repair at an Authorized Service Provider. There is an ASP list on the Toshiba website.

I'm having a minor problem with "screen drift" - the page moves slightly up and down when moving my mouse around the screen, and continues to do so after stoppi

I've installed the latest version of Shockwave, updated the driver from Logitech for my mouse (Logitech M525), tried both full screen and regular modes, restarted Firefox repeatedly. This drift is very annoying - I spend the majority of my time on FB - seems like the amount of drift varies from not at all to "damn it, I can't even place my mouse on an object without the screen moving".
I'm on Windows 7 with an Acer V5-671 laptop - help please!

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problems with screen saver image quality

Just got a MPB 15 inch. Very happy with it but have a small problem with the screen saver. I use my i Photo folders as the source for screen saver images. Some photos are shown in very good quality but others are very poor - as if low res. The original images are all of the same high quality. Seems to occur whichever video setting is used under power saving. A minor issue I now but any ideas?

Hi, Mark. Apparently some of the photos being used are low-resolution thumbnails, not full-resolution images.
What version of iPhoto do you have, and which OS version are you running? On my MBP running 10.5.6 and iPhoto 7.1.5, "All folders" is not an option in the Screensaver pane of System Prefs, so I don't know what you're actually choosing. But if I select "Pictures" (which refers to the Pictures folder in my Home folder), then the screensaver uses every .jpg file that it finds in any of the several iPhoto Libraries inside my Pictures folder. The thumbnails created by iPhoto are .jpgs, so they get used by the screensaver along with full-size high-resolution images.
The solution is not to select a folder that contains any thumbnails.

Problem with screen after update

hello,
I have a BB Passport and I have a problem after the last software update OS 10.3.1.1565
- the screen is flashing when i go into an application... This happens randomly... not every time. First I had this problem with Evernote. I erased everything from my phone and I performed a full wipe (factory reset). The problem is not solved. now is happening more often... when I go to settings, when I open an app... and so on. Usualy is flashing white screen, but last night when I wanted to watch a video, it flashed green screen...
Is there a way to solve this problem? Is this a software problem? Or I have to replace my screen?

http://www.blackberry.com/btsc/KB36757
There is a fix, though not officially released yet by BlackBerry:
http://forums.crackberry.com/bb10-leaked-beta-os-f395/os-10-3-1-2480-upgrade-files-passport-only-100...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Problem with the zoom effect

I have five images in a row and I have added a zoom effect to
the rollover and rollout effects. What I have noticed is that the
image only zooms out when I bring the mouse out from the bottom of
the image. If I try to bring the mouse from left to right across
the images the first image zooms in but not out, and this happens
for all five images. Can anyone identify what I am doing wrong?
Here is my code:
<mx:HBox width="100%" horizontalAlign="center">
<mx:Image source="@Embed('images/bistro9-1.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-1.jpg')"/>
<mx:Image source="@Embed('images/bistro9-2.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-2.jpg')"/>
<mx:Image source="@Embed('images/bistro9-3.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-3.jpg')"/>
<mx:Image source="@Embed('images/bistro9-4.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-4.jpg')"/>
<mx:Image source="@Embed('images/bistro9-5.jpg')"
scaleX=".05" scaleY=".05" rollOver="doZoom(event)"
rollOut="doZoom(event)"
click="showImage('images/bistro9-5.jpg')"/>
</mx:HBox>
<mx:Zoom id="zoomAll" zoomWidthTo="0.06"
zoomHeightTo="0.06" zoomWidthFrom=".05" zoomHeightFrom=".05" />
public function doZoom(event:MouseEvent):void {
if (zoomAll.isPlaying) {
zoomAll.reverse();
else {
// If this is a ROLL_OUT event, play the effect backwards.
// If this is a ROLL_OVER event, play the effect forwards.
zoomAll.play([event.target], event.type ==
MouseEvent.ROLL_OUT ? true : false);

I figured out the problem I was having with my zoom effect.
It worked when I added a specific number for height and width.
Before I had a percent. Try adding a height and width number, it
worked for me.

Mac pro problems with screen

my mac pro got problems with the screen it loocs like too many square and vertical lines also it dosen't start recently i just change the hard drive an when I tried to instal the sistem operative it just started those problems can someone help me what can i do?

Which Mac? what year, what model, what speed, what size screen e.g., 2006 MacBook Pro 5,1 2.95GHz 13" screen
What graphics card, if you know it.
What version of Mac OS X, e.g., 10.5.5?

Problem with Screen Painter - Graphical Layout Editor.

Hi Friends,
I have a strange problem with my Graphical Layout Editor. I first had the problem that the alphanumeric Editor gets displayed even the checkbox for Graphical Layout Editor is checked. Then I had gone through sdn forums and found that the eumfcdll.dll was missing.Thanks to sdn forums. When I copied that file into the path specified it worked fine. But the problem is my layout screen is not displayed fully. It is just displayed at the top of the window and only in that region I can drag and drop the elements. Remaining part of the window is uneditable.
what is the problem? Do I need to make any further settings?
Regards,
Raju.

try to re-install GUI patch .
Yeah , its like CNTLALTDEL(restart) , So half of the problems get resolved.
regards
prabhu
Message was edited by: Prabhu Peram

Problem with screen zooms in by itself

Similar Messages

Maybe you are looking for