Problem with scrolling text through arrow keys after exporting file to html

I am using Fash Professional CS6. I have created a text box that I can scroll through the scroll wheel of my mouse, as the scroll bar is hidden. But when I try to scroll the text through the arrow keys it is not allowing me to so that. As this is website and everyone is not going to have a scroll wheel, I have to make the arrow keys work to scroll the text. Could you please help me in fixing this problem? I tried to search this problem, but I haven't seen any questions so far.

if tf is your textfield:
stage.addEventListener(KeyboardEvent.KEY_DOWN,f);
function f(e:KeyboardEvent):void{
    if(e.keyCode==38){
        tf.scrollV++;
    } else if(e.keyCode==40){
        tf.scrollV--;

Similar Messages

In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?

Hit the '''F7''' key, you probably have Caret browsing turned on.
http://kb.mozillazine.org/Accessibility.browsewithcaret

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

Problem with sending text messages replies

After update to OS 3.0 I have problem with sending text messages:
- I CAN send new text message to someone but
- When someone REPLY me, then I CANNOT send next message in conversation
- If I DELETE someone's reply from that conversation text message sends fine.
Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with append += text in Text Field

Hi guys
i have a problem with append text.
I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
Then i have one String and one Text Field.
Using for loop im getting right results. But when im running script again then im getting same text again.
F.ex.
First time:
City name: Name 1
City name: Name 2
Second time:
City name: Name 1
City name: Name 2
City name: Name 1
City name: Name 2
I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
How to avoid this?
Here is script:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
_CityAreaTF1 = new TextField();
_CityAreaTF1.border = true;
_CityAreaTF1.wordWrap = true;
_CityAreaTF1.multiline = true;
_CityAreaTF1.selectable = false;
_CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
_CityAreaTF1.name = "CityAreaTF1";
_CityAreaTF1.embedFonts = true;
_CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

CS3 - Problem with dynamic text -

Hello,
I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

This is the Flash Player forum; please post your question in the appropriate product forum.

Parallax Scrolling: Problems with scroll wheel

Hi,I'm syue
I learn parallax effect from this video.
It helps me a lot ,but I have a problem with scroll wheel
Everything looks nice on my computer.
But when I make a test on different computers.It will show something like this...
https://docs.google.com/file/d/0B-eo1Bu6k3N-cEw2c3dyWEpfNDA/preview
I don't know how to explain the situation so I make this video.
I also chick my code and it shows me everything is fine.
I don't know how to solve this problem
Can you give me some advice?
Best regards. :-D

I know many people who have 30 gig and no wheel problem. I have an 80 gig and no problem. Finding your warranty (or buying the extended warranty) would be useful.
Good luck.
Kid

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

Problem with scrolling text through arrow keys after exporting file to html

Similar Messages

Maybe you are looking for