Problem with SD card reader

I have problem with 4-in-1 card reader in my laptop.
When I insert 64 MB microSD (with adapter of course) everything is working fine, but 1024 MB microSD isn't working. dmesg shows
mmc0: unrecognised SCR structure version 1
mmc0: error 4 whilst initialising SD card
The card is allright, because in my friend's laptoptop it works fine.
Can somebody help me?

Hi
I had a problem with my card reader also.
When I run the command "groups" noticed my user wasn't in the avahi group.
Ran :
sudo gpasswd -a <myuser> avahi
(substitute "<myuser>" by your user)
Inserted the card again and.. voila, it worked!
Greets
Nuno lopes

Similar Messages

  • Yoga 11s Problem with SD Card reader

    Hi.
    Just bought a Yoga s11 8/256gb with windows 8 64bit.
    When i put in the SDHC card (Is use in camera) in the SD card reader nothing happends..
    Tried to download drivers, but not sure if i got the correct one.

    Hi
    I had a problem with my card reader also.
    When I run the command "groups" noticed my user wasn't in the avahi group.
    Ran :
    sudo gpasswd -a <myuser> avahi
    (substitute "<myuser>" by your user)
    Inserted the card again and.. voila, it worked!
    Greets
    Nuno lopes

  • HT4101 Problem with SD card reader

    The connection between my camera and computer is working properly; but when I connect the SD card reader, nothing happens.  Anyone else experience this problem?

    dwmteach wrote:
    The connection between my camera and computer is working properly; but when I connect the SD card reader, nothing happens.
    Do you have an SD card with camera shots plugged into the SD card reader?
    FYI: Plugging a camera into your computer has nothing to do with using an SD card on your iPad.

  • T410i problem with SD Card reader

    Hello, I'm having a problem with my T410i, the card reader doesn't recognize FAT16 SD cards. The firmare version is 2.02.02.01 and I have Win XP SP3 (The laptop came with Win7 buy it was changed) Please tell me if it is any way to upgrade the driver to support FAT16 too, it is the only kind of card that has problems and I must use this kind of cards.
    Regards,
    Soppido

    hey soppido,
    a Fat16 card? Haven't seen this particular format in ages. Curious to know if the card works on a different built-in card reader of a different computer.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Why does my laptop have problems with USB card reader?

    I have a PowerBook G4, and I connect a multi-slot card reader to a USB port to read CompactFlash media. I have two problems with it and wonder if anyone can help.
    1) When I "eject" the media, then physically remove the media from the card reader, I occasionally get a "Media not removed properly" alert message. I always wait several seconds after the media icon has disappeared from the desktop before removing the media. I can't seem to reproduce this on demand, but it appears to be happening more frequently.
    2) Once the media has been removed from the card reader, the computer no longer recognizes it when it is reinserted into the card reader. I have to unplug the card reader from the USB port, then plug it back before the media is recognized.
    Any ideas how to resolve these issues?

    1) Wait longer. It can sometimes be necessary to wait as long as 15 seconds. I've never seen a good explanation of why.
    2) Are you plugging the reader directly into a USB port on the Powerbook? Are any other bus-powered USB devices connected simultaneously? If so, disconnect them and test again. If you have an AC-powered USB hub available (or can borrow one), try plugging that into the computer and the reader into the hub. (Don't use a bus-powered hub.)

  • Problems with CF Card Reader

    i just get my new pro(my first one)and i will connect my sandisk extreme cf cardreader(fire wire800) and this is not working.have someone a idee to let work this or what i am doing wrong?
    kind regards
    marc

    I have the Extreme IV FW800 CF Card Reader and I use it all the time on two different Mac Pros (2008 and 2007 versions). No problemo.

  • Problems with ID card reader

    Since I upgraded to Firefox4 I can no longer use my ID cardreader as I can't enter an authentication code to go on certain websites such as Tax-on-Web to register my tax income; or to view my documents on that website.
    What solution do I have?

    BUMP

  • (Problem with arrows )Adobe Reader doesn't work correctly

    I've problem with Adobe Reader plug-in. When I have open tab with pdf file, my arrow keys don't work in other tabs in firefox, only in this tab where it's open pdf file. Also I noticed that when trying to use the arrows in the other cards, they work on a pdf file.
    I'm tried to uninstall and install again Adobe Reader, but it doesn't work. Please help.

    I solved the problem by reinstall Firefox, because when i turned off Adobe-plugin my pdf file still worked , but arrows still didn't worked. I think, that it wasn't problem with adobe plugin.

  • Problem with RSC card on sun fire v490

    Hi all,
    I have a little problem.
    I got few v490 that were already used.
    When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
    The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
    So now, I got left with the only option i thought of.
    1. Disconnect the RSC card,
    2. This will force the output of the consol to go to the serial port(tty).
    3. Jumpstart the machine (beacuse I don't even have the password for the machine)
    4. connect the RSC card, and reset the password.
    There is someone here that encountered this problem??
    Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
    Thanks!!!

    Hi,How to set my link up in solaris 10 ?
    I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
    can any one help me in this pls how can i proceed furture for getting my NIC back?
    and i have excuted few commands
    #ndd -set /dev/ce instance 0
    #ndd -set /dev/ce adv_1000fdx_cap 1
    #ndd -set /dev/ce adv_autoneg_cap 0
    I have got dladm show-dev is
    ce0 link: unknown speed: 1000 Mbps duplex: full
    ce1 link: unknown speed: 0 Mbps duplex: unknown
    I dont understand that why my link is showing still unknown ...any help..

  • Mega Player 536 problems with SD Card

    Hello, can any one help me here, i got me MSI mega player 536 , but i can't play files from SD card. I tried 4. diferent types of SD card. Player register the card, but when i try to open files i got message: "No files fund". I found test of player on www.hw.no, and they write in the test that Player has problems with SD card.
    Any one?

    It's hardware problem with player, i'll get a new one. Then we have to conclude that Mega player 536 has not problems with SD card. Thank's to every one on this forum.

  • Problems with Airport Card

    I move back and forth from school to home, and I've never had a problem with my card before. I recently restored my compuer back to its factory settings, and it was running great with my Airport Express. I came home after moving, and my computer won't read the WPA hooked up in my house. It says I am connected, but won't let me access the internet. I'm not sure why. We tried rebooting the connection, I've looked on my computer, used system preferences and everything. I did notice when I tried to use the Network Setup Assistant, it said the password I used to connect was wrong, but when my computer uses the airport icon at the corner of the screen, it accepts the password. Any ideas on how to fix this?
    iBook G4   Mac OS X (10.3.9)  

    An additional distressing note -- I went back to aforementioned building with the 10.4.5 Powerbook last night. Did a cold boot...and the Airport Express picked up the correct network DHCP info immediately. Roamed between a couple of WAPs, surfed a couple of sites, then sat down and tried to duplicate this feat...by re-booting at least 6 more times. Nada. I once again got factory default IP addresses on each attempted reboot. I changed nothing from the network settings I'd tried last week with this machine nor were any changes made to the network or WAPs. DHCP didn't work last week on several attempts (and reboots), worked ONCE yesterday on the first boot, then nothing again on the subsequent reboots.
    Again, I'm stressing that there don't "seem" to be problems with the network or WAPs because Windows clients consistently obtain DHCP and authenticate without issue.
    Does anyone have any ideas?

  • Gigantic problems with graphc card GeFore 8800GT under MacPro

    Hello
    I'm a user of MacPro 2 Quad-Core 3GHz computer with NVIDIA GeForce 8800 GT graphic card.
    This is my second card like this one becouse I can't find any other with low price for exchange and for good using OpenGL.
    Now I have gigantic problems with this card under Mac again, please help.
    It have extreme temperatures and graphic crashes when I use on any game or anything which harder use it. At real, my older card before burn out and go to trash after this. Now it comes again
    Is there any software to speedup windmill or any thing in my system what I can change for this? I have a plan to buy a cooler, but I need help in software before this.
    Why good quality company like Apple use this bugged cards in expensive computers, I can't understand this.
    Regards
    Dawid

    Nvidia had / has had / a run of problems - and Apple can choose Intel integrated, AMD.... or Nvidia basically. Though on PC side there are reference designs and then HIS (makes a really good ATI with its own design and cooper cooler), EVGA on Nvidia front.
    We don't get all that many options.
    Drivers always get a lot of "heat" and criticism.
    Was so glad to have X1900 as a choice, but not the $399 (or wait and $250 BTO) 5 yrs ago, and its history of problems. And recalls. Or ATI 2600XT. Can't win for losing sometimes.
    One reason I went and bought GTX 460 and run Windows on my Mac Pro today of all things. Other reasons too over the years. Locked into EFI graphic cards and you can have anything you want on the salad bar, as long as you want either shrimp or chicken.
    So heat up the oven, get out the egg timer, and have at it!

  • Problem with my card ..

    hi ,
    i have a problem with my card , that i use it before and its fine but now itunes tells me  " Your payment methon was decline "
    and there is no none Option to choose  .
    i cant download anything now , cuz the store need to edit my payment first !!
    Any idea ?!

    If the reason you can't initialize your PCI-MXI-2 is because you can't find vxiinit, the good news is that you probably are initializing your PCI-MXI-2 automatically.
    The functionality of vxiinit is now performed automatically by the driver when the system starts. This has actually been true for the last few versions starting several years ago. For a while, we continued to provide a version of vxiinit that didn't actually do anything, for compatibility with installations where legacy code required the existence of vxiinit; if you think something like that would still be useful, please describe your situation so we can consider it as a use case in future versions.
    If you are seeing some other error saying that you can't initialize your PCI-MXI-2, please reply
    to this answer with further details.
    -Scot (VXI Senior Software Engineer, National Instruments)

  • Problem with credit card verification with firefox 4 (works with safari!)

    I recently upgraded to Firefox 4 and tried to book train tickets online. I have done this many times before with earlier Firefox versions. Now however, after being redirected to the card verification page and submitting my security details, instead of confirming my booking Virgin trains asks me to log on again! I thought it was a problem with the website but I subsequently booked the tickets using Safari so I guess that means there is a problem with Firefox 4. Can I go back to the previous version?

    I, also, have previously made credit card purchases with Firefox version 3 without any problems.
    I only encountered this problem with credit card verification after downloading Firefox 4. I was however able to book tickets successfully, the same day, using Internet Explorer and the card verification went through as normal. I am confident that the problem was due to problems with the new version of Firefox.

  • "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)

    We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!

    Hi Valerie,
    Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
    Also, try this:-
    Launch Adobe Reader/Acrobat.
    From the menu, choose Edit -> preferences -> General
    Uncheck the option for "Enable Protected Mode at startup"
    Restart the Adobe Reader and web browser.
    Regards,
    Aadesh

Maybe you are looking for

  • JPopupMenu - Problem with Handling ESC character.

    As per the Javadoc, it says ESC is the key for retracting the PopupMenu. But it is not retracting whenever we press ESC. Is this a bug? If it is not a bug, how do i retract the popup menu when the Esc is pressed. Thanks, -Shenbugs

  • Where is GrowlHelperApp.app? box pops up and closes after a few seconds. I don't have Growl installed - what can I do?

    Whenever I open my recently Mavericks booted mac, a pop up box appears asking me "Where is GrowlHelperApp.app?" I have never used nor heard of Growl before. I spent around an hour googling for a soultion, but the only ones I can find all relate to ha

  • Losing wireless internet connection

    After surfing the internet for a while I lose my wireless connection from my laptop. I have other computers directly connected to the Router that dont lose internet connection ever. Its just my laptop and it drives me crazy. I have to reboot the lapt

  • Get-Aduser Filtering Issue

    Hey Guys, I'm trying to do a get-aduser filter based on two criteria  1. the account is enabled 2. the samaccountname does not contain the word health I'm stumped on this one. Here's what i have thus far. I have to be close Get-ADuser -Filter 'enable

  • Submit a program but I donu00B4t want to see the slection screen of this progra

    Hi expert.   I have a problem. I am calling a program B from another program A using a SUBMIT statment. I am passing the parameters of the selection screen of the program B with the instruction VIA SELECTION SCREEN. The problem is that the program B