Problem with search bar - Macinstaller - Bing

Hello,
The orther day i've downloaded an application on Softsonic, it was a mistake ... After that Safari couldn't restart. I have trashed the application " Rapport", Safari is ok.
But now, when i'm doing a search in the search bar, it's going on a strange web search engine like "http://search.installmac.com/ " and just after that it's going on Bing....
I looked into Safari preferences, i uninstall something whose calling " Genieo" in extensions part...
Well, anybody have something to do for me ?
Thank you...

MellePopo wrote:
Hello,
The orther day i've downloaded an application on Softsonic, it was a mistake ... After that Safari couldn't restart. I have trashed the application " Rapport"
If you originally installed Rapport, then trashing the application did not completely remove it. Follow the developers instructions here.
Downloading anything from Softsonic will more than likely result in the installation of unwanted adware. Normally you will be alerted to that fact, but lots of users miss it. My recommendation is to avoid downloading anything from them, but if you must be sure to pay close attention to what the installer is telling you.

Similar Messages

Problems with search bar since upgrading to 4.0

We run two applications that worked flawflessly under 3.2 but have some issues now we have upgraded to APEX 4.0. The first application was built using a slightly altered (colors only) theme provided with APEX 3.2 (don't know its original name since we copied it under another one but it was the orange/grey one). Since upgrading the finder dropdown menu doesn't show anymore. Or rather, a tiny fraction of it is visible, only the top 2 mm or so, exactly the part that falls within the confinements of the search bar. Also the ascending/descending images don't show (although I am not quite sure that they did before the update).
Our second application was built using a third party theme and has -since the upgrade- some additional issues: the finder dropdown menu doesn't appear at all (not even a tiny bit) and the symbols for toggling between report and chart appear but don't work. We tried switching it to one of the themes that come with APEX 4.0 and after that everything worked fine. Alas, a theme switch is no option for the production versions.
Suggestions, anyone?
Robert (still struggling to change my handle).
Edited by: user5993263 on 8-jul-2010 12:35
Edited by: user5993263 on 8-jul-2010 13:38

i use Gateway NV56. scrolling works everywhere including FF 3.6 but not in 4.
I just gave up and rolled back to 3.6.
Did all that I could find on the forum update driver//turn off add ons//change config stuff.
FF4 is really awesome to look at and use but this is a major deal breaker for me. anyone anyone find a solution for this.... :(

Problems with Search in Contacts (Public folder favourite)

Office Version:Office 2010Operating System:Windows 7
I am running Outlook 2010, connecting to an SBS2003 server by HTTP and running in Cached mode.
My business contacts are stored in a Public Folder, and my personal contacts in my local Contacts folder.
The Public Folder is in my Favourites, and is designated an 'Outlook Address Book'
'Download Public Folder Favourites' is enabled in the Exchange Mail Account settings
I am having problems with Search (which was never a problem in Outlook 2007).
If I select the Contacts shortcut, under 'My Contacts I have listed in order:
Suggested Contacts
Office Contacts (this is my public folder favourite)
Contacts
Search Results
If I select the Office Contacts link, and attempt to search for a contact whose contact card I can actually see on the screen, the search will fail. The scope is defaulting to 'All Contact Items' (which is fine), but if I change this to 'Current Folder'
then the contact is immediately found.
In OL2007 I could search for a contact, even when not in a contact folder, and it would find every instance of it immediately.
Any ideas here? I have been told to rebuild my index, which I will do over the weekend as it will take some time. But I have doubts it will make much difference. This is a new machine with a fresh installation of Win7 x64 and Office 2010.
thanks

Keith, I have this same issue here. I looked on the Small Business Server pages for an answer as suggested by Xiu but could not find any. I'm not sure why this would be a SBS issue as we are not running SBS and have this issue.
For some reason, "All Contact Items" doesn't include the current folder if it is a public folder.
Did you ever get an answer/solution?

Big problem with status bar legibility in IOS 7.0.4

Hi, i'm adressing this problem to Apple. I recently update my iphone 4s to ios 7.0.4 and i have found some problems with status bar visibility in certain apps. Ex: in Photo app, the status bar is dark and it is unreadable, same in Lockscreen in Emergency menu, in menu when someone calls or you call someone and in Camera app the status bar is black and overlaps with the text and option buttons of the app. Please fix this as soon as possible because it is very frustrating.Sorry for bad english :d

There is no Apple hear in this user to user forum.
YOu can send feedback here http://www.apple.com/feedback/

Problem with search plug-in in ver 5.9

Hello
I have a problem with search plug-in when you type some key words and press search button it works fine, but if you press enter jou have following error:
Whoops. Something broke.
Version      5.9.6.43135
Message      Invalid postback or callback argument. Event validation is enabled using in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
Source      System.Web
Stack      at System.Web.UI.ClientScriptManager.ValidateEvent(String uniqueId, String argument)
at System.Web.UI.Control.ValidateEvent(String uniqueID, String eventArgument)
at System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBefore
Our technical people have been notified.
We're sorry for the inconvenience.
Thanks
Greg.

Grzegorz, I'm going to guess this is a problem with the version you're using. We're using 2007.0.620 and whenever we hit enter on the field instead of the search button itself it returns no results. As far as I can tell, it's a bug in the system.
It looks like updating to the latest version (624) isn't helpful either, although both 620 and 624 remove that nasty explosion that you're getting and instead just return the same page with no search results.
There may be a way to edit some code-behind to detect when a postback is being made, although given the locked nature of Web Tools I doubt it. If you can find a way to have the button be recognized, let me know - otherwise, I'd say it's a bug that needs to be addressed in the next version.

I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
== This happened ==
Not sure how often
== i use to search any page like movies or etc

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

E-Recruiting: Problems with search profile and serach templates

Hi Recruiting-Experts,
I´m facing problems with "Search Profiles" and "Search Templates"
(Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date) belonging to infotype 5106.
Unfortunately, it doesn't work. The hit list is always empty.
What I did:
Customizing (see above)
Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
The result:
I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
By the way, the hit list is also empty when adding and searching for birthdate.
Has it got to do with the date stored in internal format?
Thanks for any comments / help.
Regards
CHRIS
=========================================================================

Hi Sebastian,
thanks for your quick answer.
That's why I didn't get it done for hours yesterday.
Thanks again,
Regards
CHRIS

11.0.1(12) slow to load songs, other problems with search

This latest version of iTunes ...
I have several problems when I do a search. I have enabled view of the Sidebar. I highlight Music from the Sidebar, then search for a band, for example. When I double-click a song it often takes several seconds to start playing a song when I double click it. The old version wasnt' like that.
Additionally, I have difficulty actually finding things with search that I know are there. For example, if I select Music from the sidebar, then Albums on the main pane and search for a specific album title, I can only get individual songs from that album to come up. I can't get the entire album to show up so I can play it. It works with most albums but not with this one.
I have Snow Leopard on a MacBook.

Hi,
Go to view menu option and select show status bar
Jim

Problem with searching for 'empty' emails with BAPI_BUPA_SEARCH

Dear ABAP'ers.
I have got a small problem with BAPI_BUPA_SEARCH.
I Use this BAPI to search for Business Partners with the Email condition.
I put rhe Email to lv_email variable, it works ok.
    lv_email = ' '
    CALL FUNCTION 'BAPI_BUPA_SEARCH'
      EXPORTING
        email = lv_email
      TABLES
        searchresult = lt_searchresult   <= returns no BuPas
        return       = ls_bapiret2 .
But I need to have a possibility to search for such Business Partners who have got no email address. Unfortunatellu when I pass an empty lv_email to BAPI, it returns no Business Partners whilst such BuPas exist in database.
Is there some possibility to search for those BuPas who have got no email address assigned?
I will be thankful for help.
Regards,
P.

Can you query ADR6 table where SMTP_ADDR = space.
and pick the PERSNUMBER or ADDRNUMBER and pick the Patners related to that ..

Problems with scroll bars in list view

Hello,
I am using Xcelsius 2008 (Build Number 12,2,166). I am still having trouble with scroll bars on my list view control. Other list views in my dashboard seem to be ok. It seems that this list view is not ignoring the blank cells in my excel file. I have gone through many things to correct this problem. I have added a new list view, I have copied other list views that work correctly but still no success. It seems that the "Ignore Blank Cells" property is not working correctly. Does anyone have a solution for this?
Much Thx!

Hi Yusufel,
Please check the data whether the cells are really blank or having any space which could not be seen, etc.
With best wishes
BaaRaa.

Problem with Stacked Bar Chart

I have a problem with a stacked bar chart in Numbers 09. My chart is a single series with 6 categories. All of the categories have different values. The first 5 categories display correctly. However, the last category does not display in the color its supposed to, but rather shows up as white/background instead of the grey color shown on the legend. However, the value label is displayed in the proper place.
When I select other chart types (pie, regular bar, or regular column) the category shows up like it's supposed to.
This is kind of annoying since I would rather use stacked bar instead of a pie chart. Is there an upper limit on the number of values it can display as a stacked bar chart? Is this just a bug? Thanks!

Here's my result with six values in a single series. I double clicked the last bar to change its colour from the default grey (which was visible) to magenta.
Numbers 2.0.3, iBook G4, OS X v10.4.11
(Shot in the dark:) Try double clicking the value label, then changing the order position of this item.
Regards,
Barry

Problem with search forms in master-detail structure

According to JHeadstart error message i cant generate 2 search forms in one page, BUT i generated master table in one page and master form + detail table in another so WHY i cant put search forms for both tables?? They are on the different pages!
How can i solve this problem?

Sasha,
The reason this is not allowed, is because when you use Layout Style table-form, the same UImodel is used for both the table and the form page, and each UImodel can have only one advancedSearch binding (which is also used for quick search). Each advancedSearch binding can be linked to only one iterator, and that is either the iterator of the master table or the iterator of the detail table.
An enhancement request to remove this limitation is high on our wish-list, but didn't make it in the 10.1.2.1 release.
You could try to make post-gen modifications to add an extra search. I have not tried it, but here is what I would do:
- generate with search for master, and backup the generated pages and ui model
- generate with search for detail, and backup the generated pages and ui model
- merge the pages and ui models, renaming one of the advancedSearch bindings
- for the page where the renamed binding should be use, make a subclass of JhsDataAction and override onQuickSearch and/or onAdvancedSearch, to use the other binding name
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Problem with SCROL BAR

In my form i have fields in tabelar view and i have scrol bar.
When the query has been executed, I want to see all of data in my form and I offcourse must to scrol down, but when I receive a lot of data my action with scrol bar occure system block, CPU time increase and I must to terminate(with end task) the aplication.
This happened, not allways, in Forms9i and Forms6i.
Is this some oracle bug or exist some developers trick to solve this problem?
Thanks, it's very imported to us!

this may be affected by many factors assuming your form coding is good.
you may first try to set the block's QUERY ARRAY SIZE to see if it helps. if you allows DML, then the DML arrary size too, but you need to balance them by many trials. In fact, if you get a powerful server/client machine, that helps too.

Problem with tool bar

Hi,
I have a problem with my illustrator CS5, the toolbar doesn't show sub-options.
For example if I click the Rectangle Tool (M) button looking for sub-options (a sub-option is for example the Ellipse Tool (L)), nothing happens. I managed to use the Ellipse Tool (L) through shortcuts, but I want my tool bar to be able to display all the sub-options.
In other words all the buttons with a little triangle at the button-right corner, are supposed to show sub-options, but they don't.
I've consulted the problem with one of my co-workers, he suggested installing it all again -> I don't wanna do that.
Please help.
Thanks in advance.

You have to click and hold the button. As an alternative you can alt-click it to cycle through the tools

Problem with search method in AM called from JSP

Hi, im trying to get the real value from an foreign key of a view, and i have been created a custom search method in the AM, but i got a problem, the search only get results the first time that is called, the next times gets null result :
public String getValorReal(Long identificador, String vista,
String campoFiltro, String campoValor)
where identificador is the foreign key, vista is the name of the view that contains the real value of the foreign key, campoFiltro is the field name of the view that will match the foreign key, and campoValor is the field name of the view that the search method will return as the real value.
I created this class that call the search method :
public class CuentasContablesOrgLOV {
private BindingContainer bindings;
public Map CuentaContable= new HashMap(){
public Object get(Object key){
Map parametros;
BindingContainer bindings = getBindings();
String result = null;
OperationBinding operationBinding = bindings.
getOperationBinding("getValorReal");
if (operationBinding != null){
parametros = operationBinding.getParamsMap();
parametros.put("identificador",new Long(key.toString()));
parametros.put("vista","CcCuentasContablesView4");
parametros.put("campoFiltro","identificador");
parametros.put("campoValor","CuentaContable");
result = (String)operationBinding.execute();
return result;
public Map getCuentaContable() {
return CuentaContable;
I invoke this class from the JSP with EL:
<af:outputText value='#{CuentasContablesOrgLOV.cuentaContable[row.CcCucoIdentificador]}'/>
In the AM method obtains all the parameters correct, but the search only works the first time!
Do you have an idea whats been happened?
thanks a lot for your help

There is no <%@ method %> tag for a JSP.
http://java.sun.com/products/jsp/syntax/1.2/syntaxref12.html
It looks like you are trying to write a JSP that only accepts post requests - not get?
I'm not sure if you can accomplish that in a JSP directly.
You can with an HttpServlet (which is where the doGet/doPost methods are defined) but HttpJspPage doesn't extend that class necessarily.
Best you could probably do is put in a test of request.getMethod() to see if it is get/post.

Problem with search bar - Macinstaller - Bing

Similar Messages

Maybe you are looking for