Problem with search screen with iphone 4s, iOS5.1

sorry for my bad english grammer or writing:D
my problem is, when i go to search screen and turn back to home screen, the keyboard is steel there...
i am running iOS 5.1 on iphone 4s

Have you tried Restart? Reset? Restore from Backup? Restore as new?

Similar Messages

  • My mozilla firefox search engine always defaults to amazon...how do I get just basic mozilla firefox search screen with out the default to amazona?

    My mozilla firefox search engine always defaults to amazon...how do I get just basic mozilla firefox search screen with out the default to amazon.com for everything ?

    Change the search plugin in the search bar to something else and you can search with that.

  • 4s bricked after trying new update, stuck with black screen with apple logo how can i fix this

    Update bricked my 4s
    phone , stuck with black screen with apple logo .. 
    how can I fix this

    Greetings r1042,
    Welcome to the Apple Support Communities!
    I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Have a great day,
    Joe

  • Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

    Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Performance Issue with Search screen

    I am not sure to post on JSF or Hibernate forums. This one is for Performance Gurus
    I have a "Advance Search" screen built with JSF/Facelets/Ajax4JSF
    When i click on the link Advance Search it will take more than a minute to load the form.
    The screen has 21 form fields out of which 8 are dropdowns out of which 6 are populated while loading the form. They are like LookUp tables. The other two form fields dropdowns launch popups
    Now when i hit Search button it will go on for more than minute and most of the times it results in
    java.lang.OutOfMemoryError: Java heap space
    I am using Myeclipse and Tomcat.
    Here is the memory parameters from right clik eclipse properties
    "C:\Program Files\MyEclipse 6.0\eclipse\eclipse.exe" -vm "C:\Program Files\MyEclipse 6.0\jre\bin\javaw.exe" -vmargs -Xms128m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=164m
    In addition i have also set Tomcat properties in Myeclipse under "Optional JVM Arguments" as
    -Xmx1024m
    I am thinking of doing Hibernate Query Caching for populating dropdowns while loading the form
    Any other pointers/suggestions will be greatly appreciated

    Run a Profiler.

  • Search Screen with session id as a parameter

    Hi All,
    I have a search screen which will have 3 parameters as 2 input text field and 1 session value (login id).
    When user login into the application, i store the login id in session for further transaction in the application.
    Now in my search screen I designed the page with 2 input field as a parameter.
    When i click the search button, i am invoking the search method from session EJB through backing bean action method.
    i.e. searchRecord (param1, param2, loginid) --- method in EJB
    In Backing bean,
    searchRecord_Action() {
    login id -- from session
    param 1 -- input text
    param 2 -- input text
    calling searchRecord (param1, param2, loginid);
    Result is not coming because of the below reason.
    When i check the log file, the method is calling twice. First time with 3 parameters
    Select * from Table where param1 = 1 and param2 = 2 and login id = 3
    values and second time 3 parameter is null. Because of that no search record is found.
    Select * from Table where param1 = 1 and param2 = 2 and login id is null.
    How to pass login id as a conditional parameter to the query.
    Thanks & Regards
    Vimalan Balan

    Dear Friend,
    I am new to ADF. I am not sure i am using ADF as a binding layer. But i am binding the parameter into my backing bean.
    More over when i click the search button, it directly invokes the method in the EJB and after that only the backing bean method is calling. How to stop the initial call when click the search button.
    The below code in the pagedef file.
    <methodIterator id="searchPaymentOrderIter"
    Binds="searchPaymentOrder.result"
    DataControl="POMasterDetailSessionEJBLocal" RangeSize="10"
    BeanClass="mof.egov.portal.model.EgovPaymentorderMaster"/>
    <invokeAction id="tableRefresh" Binds="searchPaymentOrder"
    RefreshCondition="${(valueHolder.refresh) and (!adfFacesContext.postback)}"/>
    <methodAction id="searchPaymentOrder" MethodName="searchPaymentOrder"
    RequiresUpdateModel="true" Action="999"
    IsViewObjectMethod="false"
    DataControl="POMasterDetailSessionEJBLocal"
    InstanceName="POMasterDetailSessionEJBLocal.dataProvider"
    ReturnName="POMasterDetailSessionEJBLocal.methodResults.POMasterDetailSessionEJBLocal_dataProvider_searchPaymentOrder_result">
    <NamedData NDName="poNumberFrom" NDType="java.lang.String"
    NDValue="${bindings.searchPaymentOrder_poNumberFrom}"/>
    <NamedData NDName="poNumberTo" NDType="java.lang.String"
    NDValue="${bindings.searchPaymentOrder_poNumberTo}"/>
    </methodAction>
    Thanks & Regards
    Vimalan Balan

  • Problem of black screen with MSI gtx570 twin frozr 3

    I have a problem that will seriously hurt me...(gtx 570 twin frozer 3)
    psu:680green
    cpu:1055t oc
    mb:ta 890 fxe
    ram:crosair 4 gb 1600
    my problem just in game with support dx11
    dx9 very well and no problem
    for example:
    crysis 2 dx11
    homefront dx11
    bc 2 dx11
    deus ex dx11
    all game with support directx 11 and Only 5 seconds of the game comes out and starts again after a few seconds without any problems
    Friends please help me to resolve my issue I think.
    I do not know the English language well,sorry
    Thanks to all.

    Try increasing your core voltage using msi afterburner.  My card personally is stable at 0.9750mv and some users are stable at 0.9880mv.  Good luck mate!

  • Sleep mode wakeup with black screen with curser for a few seconds

    when the computer goes to sleep, sometimes when i click anybutton, it gives me a black screen with a curer and then it apparing everything normally. whats the problem causing this

    I have the same problem but I do not know of any solutions. I am searching for one as well.
    Let me rephrase the issue I experience. After the display goes off because of the energy saving settings, and after moving the mouse (or pushing a key) to wake it up, the screen appears black (but with the presence of the mouse cursor, which can move and even change shape---to a hand or a hyphen---if the pad is clicked) and stays black for a couple of seconds, from 3 to 10 seconds I believe.
    The computer is not responsive after that but not before. The previous and normal behavior is intead for the screen to turn on immediately and the computer being responsive right away. Instead, now there is a window of 3-10 seconds where the screen is black with a cursor and the computer unresponsive.
    Of course, it is very frustrating. Please help.

  • Help needed with search help with ina search help

    Hi all,
    i have a field fld1 (non primary key )and to the dataelement of that field a search help is assigned in table ztable1.
    That search help is referring to a table in which fld1 is primary key in ztable2.
    I have created another search help with all the fileds in ztable1 and iam using this search help in a selection screen returning another field say fld2.
    in this search help i have drill down for fld2, which in turn gives the fields of ztable2.
    This is working fine.
    i have created another search help with the fields of ztable1 but this time its its returning the value of fld1. for some reason in this search i am not able to see the drill downn for fld1 .
    can anyone tell me how to get the drill down even the import parameteris fld1
    Thanks

    hi,
    any suggestions on this
    thanks

  • Need help installing Leopard. Stuck with Gray Screen with looping circle!!!

    I currently have Mac OS X 10.2.1 installed in my G4. Never upgrade since i got it. I purchased Leopard and tried to install it.
    After I put the DVD in and clicked Install it restarted my computer. Then it started the installation process. 10 minutes later it stopped and said installation failed. Disk is dirty. I finally got the DVD and and tried again but all i got was the gray screen with the looping circle.
    I tried re-installing 10.2.1 then try Leopard again. After asking me to restart my computer nothing happen. No installation process. Just a gray screen with the looping circle for over 10 hours. (left it over night)
    What should I do? Can this be fixed? How can I install Leopard??????
    HELP!!!!!!!!!!!!

    Get out your Jaguar installer disc and boot from it. After the installer loads and you select your language the menu bar should appear. Select Disk Utility from the File menu. After DU loads select your hard drive from the list on the left then click on the First Aid tab. Click on the Repair Disk button. Wait until the repair process is completed. If any errors are reported that have been fixed, re-run Repair Disk until no errors are reported and the disk is pronounced OK. If DU is unable to repair the drive, then you will need something like Disk Warrior or TechTool Pro to repair the drive. Once your drive is properly prepared boot from the Leopard installer DVD. When you get to the point of selecting the destination drive click once on your hard drive then click the Options button. Select the Archive and Install option. Do not select the option to preserve the user folder and network preferences as these may be damaged. Click on the OK button and complete the installation. Be sure to use the same username and password that you use now for the admin account.
    Your hard drive will not be erased and your old system will be saved in a Previous System Folder located at the root directory of your hard drive. You should then be able to transfer your personal data from the PSF to the newly installed system.
    BTW, repairing permissions will not fix your problem.

  • My New I-Pod Pouch 5 Is Stuck With A Screen With A USB Pointing Up To An I-Tunes Logo HELP

    I Bought My Grandson A I-Pod Touch 5 & It's Stuck With A Screen That Shows A USB Wire With An Arrow Pointing Up To A I-Tunes LOGO, Cannot Get It To Do Anything??? Help Please <> Thank :-)

    Connect the cable from the Touch to your computer's USB port, then open iTunes.
    Please get iPod Touch User Manual - iOS 6

  • Cant open firefox on second screen on computer with two screens with two graphics cards.

    I have a computer with two screens and two diffrent graphics card. One of them is onboard GC and another one is USB GC. I am running two instances of FF and it works fine with 3.6.20 version. But when I update to the latest version of FF either 5 or 6 this does not work. Even if i try to open one instance of FF on second screen on USB GC , I cant see anything> i have to move it to the main screen to see the FF window and will not work on the extended screen. I am using windows 7 pro 32 bit and the screen resolution is set to 1280x1024 on both the screens.
    Can you please help.
    Thanks.
    Regards
    PJ

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Having an issue with Searching Contacts -IOS8 iPhone 5S - MS Exchange

    When I search for a certain Contact by name EX: John Smith, I would get Jon Smith about 10 names down and others appear before him at the top of the list. When I click on the other contacts you can see his name in the contact notes which I guess is why the others show up. EX: Jon Smith Referral in contact notes of Jane Doe.
    I only want the contact search to show the the specific person I am searching for. I do not want other names to show up along with the search. Is it possible to have the contact search ONLY look at the First/Last Name and no other info?
    Hope that makes sense to someone out there..... Cant find an answer ANYWHERE.
    Thanks so much!

    Thats exactly what I want it to do. Say for example I search Smith I will get about 25 people, and Smith is somewhere linked to it in an email thread, contact details, or something like that, no relevance in the First Last or Email. I do not understand how the contact search is even coming up with this many results. I can confirm this is only using the contact search and not Spotlight or anything like that. I seem to be the only person in the universe which is having this problem, I deleted my MS exchange account and re-added it, factory reset the phone. No clue where to go from here. Lol my only work around that I have found for now is if I just say the First name and last name to Siri she will come up with the contact details I need for that specific person. Driving me crazy!
    PS - Thank you for trying, much appreciated that you gave it a shot to see if you could make it happen for you!

  • IPhone 3GS freezes randomly and left with black screen with stripes

    Hi
    Have an iPhone 3GS currently running on ios 6. 
    It was freezing a few times a day (or more) while under ios 4 so I upgraded and did a full clean restore and have only downloadded a few apps since.
    But the issue still happens.  I have lots of battery life and I can be playing a game (without wifi), or web browsing, or downloading something from iTunesU and it just decides to stop working - although it hasn't happened while on a call if that helps.  Screen goes black and usually has stripes on it.  Resetting doesn't work, although I try, but have found if left alone for 20 mins I can then restart it again.  I have no apps running in the background, and have follwoed the usual steps to get it started again.  Very annoying and neither a clean restore nor software upgrade has fixed the problem.
    Any ideas on what I can do - or if this is a hardware problem??
    thanks in  advance for any help.

    I am not sure what you mean by "white strips" but have you tried to pull the firmware file and place it in DFU Mode and restore as new?
    Skip Step #2 in this article, TS1813 - Support - Apple and change all the word "iPod" to "iPhone" then use this, iClarified - iPhone - How to Put an iPhone Into DFU Mode to place in DFU Mode. If this does not fix it, the iOS needs to be serviced.

  • Hp3400 keeps crashing with blue screen with clean windows 7 64

    Hi, 
    A brand new hp3400 mt (with product number LH121EA#ABU) crashed during the initial setup process for win 7. Eventually I could boot to windows, but then it kept crashing. Since then, I have reformatted and reinstalled win 7 64, and downloaded and installed some drivers from your support site for all relevant hardware (I think), but not software.
    I ran memtest on the ram and it is fine.
    I can now boot to windows (although it took a number of runs through the installation process, with crashes occurring intermitently). I can navigate for a while, then things hang up (e.g. clicking Device Manager in Control Panel takes 4 - 5 minutes to open, if at all). The crashes occur randomly, e.g. when browsing the web or installing an update. After restart the crash recovery notification reports errors with BC Codes of 1a or 50 (if that's any use).
    Please help! I'm at the limit of my knowledge now!

    In that case you need to check with the Memory (RAM) and the Hard Disk Drive.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    Regards;
    Ray
    I am an HP employee
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

Maybe you are looking for