Problem with selecting and transforming layers:

I can't seem to click freely any longer between layers on my image. I have to got to my tool bar now to select a layer and then opt to "Show Transform Controls." I already tried resetting my preferences, what should I try next? I'm using the creative cloud complete version on a Mac. Help is much appreciated! Deadline tomorrow afternoon.
-Joel

I can't seem to click freely any longer between layers on my image.
What does that mean? "Auto-Select" maybe?
I have to got to my tool bar now to select a layer and then opt to "Show Transform Controls."
Do you mean the Layers Panel?
"Show Transform Controls" should stick, does it turn off?
Could you please post a screenshot to illustrate the issue?

Similar Messages

Problems with grouped and merging layers

Sometimes when I combine layered .pdf files (by dragging pages in or doing Merge Files Into a Single PDF), the layers come in grouped (by file name) and other times they do not. Why is that? Also, is there a way to ungroup layers in Acrobat?
Any help is much appreciated!
For those interested in the background, I have a bunch of layered .pdf files that I want to combine. They were created from a single large Photoshop image sliced into page-sized pieces so the files all have the same layers and the layers are arranged and named the same in every file. I want the combined PDF book to maintain these layers so the user can, with one click, turn on or off a given layer across all pages of the PDF. Clicking on a layer on every page just isn't going to cut it.
I figured I would just combine all of the single PDF pages and then merge all of the layers of a given name so that I end up with just one layer for each type. The problem is that the merging works sometimes and not others. I can't figure out why, but it works far more often when the files combine without the layers grouped. It still doesn't work all of the time, but it NEVER works if the layers come in grouped - so I figure I would start there.
I'm using Adobe Acrobat 9 Pro. I used the method outlined below to turn my layered Photoshop (CS5) files in layered PDF files:
http://www.ehow.com/how_8296095_convert-photoshop-pdf-layers.html

After hours (and hours) of debugging Acrobat, I figured out that as long as the file(s) I drop in are not at the end of the document, then no layer groups are formed - all of the layers in both files are at the top level.
If I drop a file in after all existing pages, then the layers are grouped by file name.
and
If there are layer groups then merging fails. The names of the merged layers disappear from the layer list but the conent is left permanently visible.
If the layers are not divided into groups, then merging works most of the time. I haven't figure out why it occassionaly fails this way too, but so far it's been easy to work around.
This is Adobe Acrobat Pro 9 so no chance of it being fixed - so amybe this will help someone else in the same boat.

I have problem with selecting and Copying is some of the applications

I am using blackberry passport. I would like to know how to select text and copy text from pages of YouVersion Bible. When I was using blackberry bold 9790 it was simple but now I am using blackbery passport I have failed to know how to perform that task.

While the content of many books, including the Bible have no copyright, the effort that the developer has gone through to be able to present it in an app could be. Not saying it is, I have encountered apps where I think the developer in advertently turned off features such as resize or copy.
Paul
Torch 9810; PlayBook 64g; iPad1 64g; iPad2 64g; iPhone6 64g Passport
Provider Bell (tablets all WiFi)

Please, help. I have a simpple problem with selects and appends

Hi experts,
I want to append the data from pi_temp to pi_inter in every LOOP.
What I have to do? Thanks a lot !!!! thank u!
CODE:
FORM get_interconsultes_data TABLES pi_inter STRUCTURE zbw_interconsultes.
DATA: pi_temp LIKE TABLE OF zbw_interconsultes.
SELECT ZISH_POS_INTER~FALNR
    INTO table i_inter
    FROM ZISH_POS_INTER
where ( ( ZISH_POS_INTER~DATA_CREACIO IN rg_erdat )
OR ( ZISH_POS_INTER~DATA_RESPOSTA IN rg_updat ) ).
DELETE ADJACENT DUPLICATEs FROM i_inter.
loop at i_inter.
SELECT *
    INTO CORRESPONDING FIELDS OF TABLE pi_temp
    FROM ( ZISH_CAP_INTER LEFT OUTER JOIN ZISH_POS_INTER
      ON ZISH_CAP_INTEREINRI = ZISH_POS_INTEREINRI
      AND   ZISH_CAP_INTERPATNR = ZISH_POS_INTERPATNR
     AND ZISH_CAP_INTERFALNR = ZISH_POS_INTERFALNR
     AND ZISH_CAP_INTERSERVEI_PETI = ZISH_POS_INTERSERVEI_PETI
     AND ZISH_CAP_INTERER_PETI = ZISH_POS_INTERER_PETI
     AND ZISH_CAP_INTERSERVEI_REALIT = ZISH_POS_INTERSERVEI_REALIT
    AND ZISH_CAP_INTERER_REALIT = ZISH_POS_INTERER_REALIT
     AND ZISH_CAP_INTERDATA_CREACIO = ZISH_POS_INTERDATA_CREACIO
    AND ZISH_CAP_INTERHORA_CREACIO = ZISH_POS_INTERHORA_CREACIO )
    where ZISH_CAP_INTER~FALNR = i_inter-episodi.
*MOVE-CORRESPONDING pi_temp to pi_inter.?????????????????
endloop.

DATA: pi_temp LIKE TABLE OF zbw_interconsultes.
data: ls_temp like line of pi_temp.
data: ls_inter like line of pi_inter.
loop at i_inter.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE pi_temp
FROM ( ZISH_CAP_INTER LEFT OUTER JOIN ZISH_POS_INTER
ON ZISH_CAP_INTER~EINRI = ZISH_POS_INTER~EINRI
AND ZISH_CAP_INTER~PATNR = ZISH_POS_INTER~PATNR
AND ZISH_CAP_INTER~FALNR = ZISH_POS_INTER~FALNR
AND ZISH_CAP_INTER~SERVEI_PETI = ZISH_POS_INTER~SERVEI_PETI
AND ZISH_CAP_INTER~ER_PETI = ZISH_POS_INTER~ER_PETI
AND ZISH_CAP_INTER~SERVEI_REALIT = ZISH_POS_INTER~SERVEI_REALIT
AND ZISH_CAP_INTER~ER_REALIT = ZISH_POS_INTER~ER_REALIT
AND ZISH_CAP_INTER~DATA_CREACIO = ZISH_POS_INTER~DATA_CREACIO
AND ZISH_CAP_INTER~HORA_CREACIO = ZISH_POS_INTER~HORA_CREACIO )
where ZISH_CAP_INTER~FALNR = i_inter-episodi.
* Loop PI_TEMP in to work aread(LS_TEMP) move to other work area(LS_INTER)
* and append workarea(LS_INTER) to table PI_INTER
loop at pi_temp into ls_temp.
    MOVE-CORRESPONDING ls_temp to ls_inter.
    append ls_inter to pi_inter.
endloop.
endloop.
Hope this helps.
Regards,
Rich Heilman

I'm using LR5 and have recently had a problem with selecting and deselecting images. When I click on an image, the adjacent image also gets selected.

To expand on the problem, I've tried importing a different catalog and I get the same problem so I think the issue is in the application. Also I've tried using different mice and get the same result. Do you think I need to uninstall LR and reinstall it?

First, try rebooting your computer.
Second, exit Lightroom and delete the LR preferences: Preference and other file locations in Lightroom 5. On Mac, reboot after deleting. Sprinkling that magic fairy dust often fixes weirdness in the LR user interface.

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

I'm having a problem with coreaudiotoolbox and corevideo.dll.

I'm having a problem with coreaudiotoolbox and corevideo.dll. PC was corrupted, I restored. Now when I launch Safari, I run into errors, can't find these two dll files. Itunes won't download at all because it says something is missing but won't say what. Now what do I do? Apple won't help because they want $50 dollars just to talk with me and I've been down that road before and to no satisfaction. Help please!!

Taken at face value, you're having trouble with Apple Application Support program files there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept, so an AAS problem can affect both iTunes and Safari.)
Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!

Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!
I installed PremiereProCS4, and after, "Adobe Master Collection Suite CS5" in Italian Language, with PremiereProCS5 and AfterEffectsCS5 on OS Windows7x64Bit.
I made a first composition with AfterEffects, from PremierePro by choosing "Adobe Dinamic Link">"Replace with AE Composition".
After that, I made another second version of the same project, directly with AfterEffects.
I want replace this AE version with existing version, in PremierePro.
Thus, I selected "Adobe Dinamic Link">"Import AE Composition".
1) But, the problem is that the new, fresh AE composition is not found!
The Dinamic Link, in PremierePro, doesn't refresh the window where it is located the new AE Composition called "n°2" made last with AE, (not with DynamicLink)!
There are available 3 files, that I made, but all the files display only the old composition called "n°1", made with DynamicLink, and with "Replace with AE Composition" command!
The composition made with AE directly, is not displayed!
Why?
In fact, I tried to right click the clip, in PremiereProCS5 timeline, choosed "Replace with Clip">"From Folder" and selected the last imported AE composition: the composition is allways the OLD file made with DynamicLink, not the file made directly with AE!
Why?
Help!
Horsepower0171.

"...or if you must use multiple projects, start each one from scratch instead of duplicating and renaming..."
Yes!
I made from scratch these new projects with AECS5, called:
"Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 02.avi" and
"Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 03.avi",
not renamed, nor duplicated.
-But PremierePro and DynamicLink doesn't display those in the window!

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problems with Mail and Safari

Hi,
I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
Cheers,
Andrew

Scott,
I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
Obscure....

Problem with selecting and transforming layers:

Similar Messages

Maybe you are looking for