Problem with sender agreement in rfc

My scenary is RFC -> XI -> FILE.
I created one message interface with atribute asyncronous and output message the rfc.
I created one interface mapping and message mapping
In integration directory I created one chanel of comunication,the receiver determination, the interface determination, the receiver agreement and the sender agreement. In the sender agreement in interface I put the same name of message interface and then I activated all.
When i execute the rfc i have one dump. This dump is "senderAgreement not found: lookup of binding via CPA-cache". But i declarated and activated the sender agreement.
Somebody knows the problem.
Thank's for all.

Hi Antonio,
           A few things that you should know:
1) You need not create a message interface for RFC, as RFC iself is an interface.
2) You need to create one inbound message interface for file message.
3) You will need two message mapping, one for request message and one for response message in case yours is a synchronous scenario. But only one message mapping (request) in case of asynchronous scenario.
4)One interface mapping both for sync and async scenario.
In Integration Directory:
1) 2 communication channels: sender RFC and receiver File.
2) 1 Receiver determination, interface determination and sender aggrement.
Regards,
Ashish

Similar Messages

  • Problem with Sender Agreement for EDI File to Idoc scenario

    I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
    Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI  to send to R/3 to create orders.
    All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
    The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
    How can I create the Sender Agreement using the same CC for my other scenario?
    I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
    Pl Advise.
    Thanks!
    PSR

    You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
    Thank you for the reply Aamir,
    Do you have any document which can guide me through the process?
    Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
    Thx
    PSR

  • Problem with sender agreement

    Hi,
    We are trying to send a file from the file system (using file channel) to XI. However we are getting the error as " No suitable sender agreement" found error in the communication channel monitoring in RWB. However the sender agreement is very much there and is activated also.
    Any idea on this ?
    Regards
    Ganesh

    Hi,
    try creating your scenario with a integration directory wizard
    it will make sure that everything is correct
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Problems with sending IDOC via RFC from Unicode to NonUnic

    Hello
    I have following problem, sending an IDOC via RFC from Unicode to Non Unicode System. IDoc is not sent with error: codepage of receiver system cant determined. receiver destination was: Message no. B1999
    I have tried different options in sm59, but it didnt help.
    Any ideas? The recipient system is rather old, version 4.0

    hey,
    I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and  RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Problem with sending and receiving e-mail through exchange [GMail]

    Hello I have problem with sending and receiving e-mail.
    all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
    I have this problem on my two iPhone

    http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

  • I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

  • Mail and iPhoto Problems with sending photos.

    Mail and iPhoto Problems with sending photos.
    I have this problem that started a while ago and seems to be getting worse.
    Here are the different scenarios.
    -If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
    -If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
    -If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
    -If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
    -If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message  I get a message it can't be opened because it is empty.
    -If I drag that same image to the mail message body the same thing happens.
    -If I send that email to someone they cannot open the image file.
    What I can do:
    - I can drag that same image file on the desktop to my dropbox folder and  it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
    -I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
    -I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message.  I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
    I can send that message to someone and they can see the photo and open it fine.
    -If I send that same email to me I can see the photo within the mail.  If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
    I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
    I am stumped, all and any help is appreciated.

    Another problem that may be related….
    I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message  "Files cannot be created in the selected location. You do not have permission to write to the selected location.   Please choose a different location."  I have found that i can only save the file to the clipboard.   I have repaired permissions many times and still I have this problem.

  • Problem with Rebate agreement

    We have a problem with Rebate agreement settlement.
    Generally when the finall settlement of Rebate is completed ( with status D - D means final settlement ), the liability should be zero. However, after we made final settlement, still some amount is showing as liability when we looked at the sales volume of the rebate agreement.
    Please help us to fix the issue.
    Thanks in advance for the help.

    Hello,
    Please review the Note 392683.
    Regards,
    Raghavendra YN

  • Problem with sending sms - nokia x3

    Hello,
    I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
    Could somebody help me, please?
    p.s. Sorry, but my english isn't well. I hope the post is understood

    Check if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
    To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Problems with sending via url

    Hi there, I've got a problem with sending via an URL. If I send and receive something I use a method called connect. This method works well, I construct a URL, connect and receive an ObjectStream.
    But as I only want to set some values in another use case I do not want to receive anything,
    But it doesn't work - my servlet does not receive any request.
    Could anyone please help me to solve this?
    Thank you.
    Regards
    Tarik
    private synchronized static void connectOneWay(String data)
                throws IOException, ClassNotFoundException {
            try {
                URLConnection connection = null;
                URL testServlet = null;
                Class classLock = ServletConnector.class;
                while (locked)
                    classLock.wait();
                locked = true;
                testServlet = new URL(servletURL + data);
                if (MMSCMSTree.debug)
                    System.out.println("Servlet URL: " + testServlet);
                connection = testServlet.openConnection();
                connection.setDoInput(false);
                connection.connect();
                locked = false;
                classLock.notify();
            } catch (InterruptedException e) {
                e.printStackTrace();
            }

    Hi
    There was not a problem with this, the problem was on the server side, infinite loop ... :-)
    Regards
    Tarik

  • Problems with sending attachements.

    Hello I've a problem with sending attachments.
    I've got mail  Version 5.0 (1244.2/1244.3) and Hosted Exchange (xs4all in the Netherlands). Most of my mail works fine (sending and receive mails).
    The most irritating problem is I cannot send messages with a attachement even 1 KB.
    Hope anyone can help?
    Ohter synchronisation Calender & contacts are even not working fine - but a cable will help. So if anyone can help there to, I will be happy.
    Thanks Vanessa

    Im having same problem with BTINTERNET account email, tbh ive had issues with this from the start. keeps going on about yahoo *** is that about... could do with someone verifying settings ive done what all the website says but same issue....attachment is only 11.7mb surely thats not an issue.......anybody know whats going on????

  • Problems with sending/receiving picture messages

    Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S?  I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

    Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

  • Problem with send e-mail

    Hello,
    I have a problem with send e-mail.
    When I create a new message, the e-mail is send for customer and me, but the description of message dont send with e-mail.
    I have created a Smartform that send this e-mail and your context there is information for send this information.
    When I do a modification in this message, when i put a new description, a description preview is send, but a new description dont send.
    Can anyboby help me.
    Thanks a lot.

    Hi,
    I already have created a development, but this found the description preview and not actual in run time.
    Development:
    read table gt_notif_type_text into gs_notif_type_text
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_text.
    endif.
    read table gt_notif_type_textt into gs_notif_type_textt
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_textt.
    endif.
    In the Smartform on acording abouve:
    &gs_notif_type_textt-stxt()& &gs_notif_text-last_usr()& &gv_notif_textdate& &gv_notif_texttime&
    Thanks.

  • Problem with sending text messages replies

    After update to OS 3.0 I have problem with sending text messages:
    - I CAN send new text message to someone but
    - When someone REPLY me, then I CANNOT send next message in conversation
    - If I DELETE someone's reply from that conversation text message sends fine.
    Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

    no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Maybe you are looking for