Problem with service consumption from ABAP side "SOAPFaultCode: 1"

Hi gurus,
I have created a Java Web Service on our Netweaver Portal, my team partner (ABAP) has created the respective ABAP proxy class from the web service´s definition and the logical port. All works just fine on development environment but when we test all the scenario integrated at quality environment through ABAP client proxy->test(f8)) the system throws the following error: SOAPFaultCode: 1 nothing else. Could you help us to figure out the problem and solve it?
Please Help, Regards
MC

Hi Mariana,
It's good practice to post what caused the issue & how it was resolved. This helps others that may experience the same issue & come across this thread.
Regards, Trevor

Similar Messages

Problem with generating WSDL from ABAP

Hi all
I have encountered a problem.I created a WSDL from a ABAP program,but in the ABAP function module what it does is it inserts value onto a transparent table from a table which let me specify as a virtual table.So after generating the wsdl i am surprised to see the virtual table has come in the output part .I am unable to make out why this happened.
i am mentioning below the ABAP code which inserts value on to a transparent table from a virtual table
Code-Function module-smlg_modify
<u>virtual table Definition</u>
"table with items for insertion
DATA INS_TAB LIKE RZLLITAB OCCURS 0 WITH HEADER LINE.
DESCRIBE TABLE MODIFICATIONS LINES ITEMS.
LOOP AT MODIFICATIONS.
    MODIFICATIONS-GROUPTYPE = GROUPTYPE.
    CASE MODIFICATIONS-MODIFICATN.
      WHEN 'I'. "insertion of an item
        INS_TAB = MODIFICATIONS.
        APPEND INS_TAB.
END LOOP
DESCRIBE TABLE INS_TAB LINES ITEMS.
IF ITEMS > 0.
    INSERT RZLLITAB FROM TABLE INS_TAB-->(one i mentioned as virtual.)
ENDIF.
In such a case how comes the virtual comes as the output in wsdl
I am mentioning below the the wsdl
<----
>
<?xml version="1.0" encoding="ASCII"?>
<wsdl:definitions xmlns:ctc="http://sap.com/ctc" xmlns:ctc-bapi="http://www.sap.com/ctc/abapprovider" xmlns:ctc_ref="urn:example/encoded" xmlns:ctclib="http://sap.com/ctc/schema/lib" xmlns:plnk="http://schema.xmlsoap.org/ws/2003/05/partner-link" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://sap.com/ctc/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SMLG_MODIFYServiceDefinition" targetNamespace="http://sap.com/ctc/services">
<wsdl:types>
<xsd:schema xmlns:tns="http://sap.com/ctc/services" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://sap.com/ctc/services">
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="SET_LOCK" type="xsd:string"/>
<xsd:complexType name="ERFC_MODIFICATIONS">
<xsd:sequence>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
<xsd:element name="CLASSNUM" type="xsd:int"/>
<xsd:element name="CLASSNAME" type="xsd:string"/>
<xsd:element name="GROUPTYPE" type="xsd:string"/>
<xsd:element name="TIMERERD" type="xsd:int"/>
<xsd:element name="LOGRERD" type="xsd:int"/>
<xsd:element name="FAVTYPE" type="xsd:string"/>
<xsd:element name="MODIFICATN" type="xsd:string"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="SMLG_MODIFYInput">
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="SET_LOCK" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="SMLG_MODIFYOutput">
    <wsdl:part name="ERFC_MODIFICATIONS" type="tns:ERFC_MODIFICATIONS"/>
    <wsdl:part name="CLASSNUM" type="xsd:int"/>
    <wsdl:part name="CLASSNAME" type="xsd:string"/>
    <wsdl:part name="GROUPTYPE" type="xsd:string"/>
    <wsdl:part name="TIMERERD" type="xsd:int"/>
    <wsdl:part name="LOGRERD" type="xsd:int"/>
    <wsdl:part name="FAVTYPE" type="xsd:string"/>
    <wsdl:part name="MODIFICATN" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SMLG_MODIFYPT">
    <wsdl:operation name="SMLG_MODIFYOperation">
      <wsdl:input message="SMLG_MODIFYInput"/>
      <wsdl:output message="SMLG_MODIFYOutput"/>
      <wsdl:fault message="ctclib:BAPIException" name="BAPIException"/>
    </wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SMLG_MODIFYBinding" type="SMLG_MODIFYPT">
    <ctc:binding transport="com.sap.mw.jco"/>
    <wsdl:operation name="SMLG_MODIFYOperation">
      <ctc-bapi:function name="SMLG_MODIFY"/>
      <wsdl:input>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="SET_LOCK">
            <field elementname="SET_LOCK">
              <name>SET_LOCK</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:input>
      <wsdl:output>
        <ctc:body encodingStyle="ctc:SCHEMA2ABAP">
          <ctc-bapi:partbinding name="ERFC_MODIFICATIONS">
            <table elementname="ERFC_MODIFICATIONS" jcoName="ERFC_MODIFICATIONS">
              <structure elementname="RZLLIMODGP" jcotype="RZLLIMODGP">
                <field elementname="CLASSNUM">
                  <name>CLASSNUM</name>
                  <type>NUMC</type>
                </field>
                <field elementname="CLASSNAME">
                  <name>CLASSNAME</name>
                  <type>CHAR</type>
                </field>
                <field elementname="GROUPTYPE">
                  <name>GROUPTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="TIMERERD">
                  <name>TIMERERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="LOGRERD">
                  <name>LOGRERD</name>
                  <type>NUMC</type>
                </field>
                <field elementname="FAVTYPE">
                  <name>FAVTYPE</name>
                  <type>CHAR</type>
                </field>
                <field elementname="MODIFICATN">
                  <name>MODIFICATN</name>
                  <type>CHAR</type>
                </field>
              </structure>
            </table>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNUM">
            <field elementname="CLASSNUM">
              <name>CLASSNUM</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="CLASSNAME">
            <field elementname="CLASSNAME">
              <name>CLASSNAME</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="GROUPTYPE">
            <field elementname="GROUPTYPE">
              <name>GROUPTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="TIMERERD">
            <field elementname="TIMERERD">
              <name>TIMERERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="LOGRERD">
            <field elementname="LOGRERD">
              <name>LOGRERD</name>
              <type>NUMC</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="FAVTYPE">
            <field elementname="FAVTYPE">
              <name>FAVTYPE</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
          <ctc-bapi:partbinding name="MODIFICATN">
            <field elementname="MODIFICATN">
              <name>MODIFICATN</name>
              <type>CHAR</type>
            </field>
          </ctc-bapi:partbinding>
        </ctc:body>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMLG_MODIFYService">
    <wsdl:port binding="SMLG_MODIFYBinding" name="SMLG_MODIFYServicePort"/>
</wsdl:service>
</wsdl:definitions>
>
My purpose is to create a .cproc file which will pass values to this wsdl file.I dont know how to pass as the table which the function module accepts as input is output in wsdl.so i am not aware how to pass value.Kindly help me out how to create a .cproc file for it
Thanks
Neeta

Hello Anton,
where on the abap-server I can find the generated wsdl?
I have downloaded the wsdl to eclipse 3.3 and can call the webserrvice successfull.
But when I try o call the webservice with <netweaver-server>/wsnavigator, I can input the data-fields, but the request answer is that the web-service is not found on the given domain.
So I want manipulate the domain in the wsdl.
Best regards
Oliver Prodinger

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Can we get a "Add to Browser Favorites" URL from ABAP-side?

Hi,
via "Add to Browser Favorites", you can get a URL for opening exactly the portal page you are currently on. Is there any possibility
to get (or create/generate) the URL for such a page from ABAP-side? We have the requirement to send e-mails from the ABAP
backend with links (URLs) to a corresponding portal page (like the example below). This has to be done quite generic, mi.e. the server,
the port, the application parameters, etc. cannot be hardcoded but have to be generated in a generic way.
Thank you and kind regards,
Florian
PS: Example:
http://pwdf6460.wdf.sap.corp:50000/irj/portal/ajax?navigationtarget=roles://portal_content/com.sap.pct/every_user/com.sap.pct.erp.common.bp_folder/com.sap.pct.erp.common.roles/com.sap.pct.erp.common.erp_common/com.sap.pct.erp.common.lpd_start_wd_abap&&WebDynproApplication=CPROJECTS_FPM&WebDynproConfiguration=CPROJECTS_FPM&ApplicationParameter=OBJ_EVENT%253dDPO47BAB5FEB7A55A28E10000000A424B1D47BAB5FEB7A55A28E10000000A424B1DDPO++++++++++++++++++++++++NON&NavMode=3&System=SAP_cProjects&PrevNavTarget=ROLES%253a%252f%252fportal_content%252fcom.sap.pct%252fevery_user%252fcom.sap.pct.plm.ppm.PPM50%252fcom.sap.pct.plm.ppm.Roles%252fcom.sap.pct.plm.ppm.port_prj_mgmt_showcase%252fcom.sap.pct.plm.ppm.projectmanagement_showcase%252fcom.sap.pct.plm.ppm.pm_overview%252fcom.sap.pct.plm.ppm.ws_projects%252fcom.sap.pct.plm.ppm.cpr_projects_showcase&WebDynproNamespace=sap&&NavigationContext=merge(ROLES://portal_content/every_user/general/eu_core_role/com.sap.uwl.home_core_ws/com.sap.netweaver.bc.uwl.overview%7CROLES://portal_content/every_user/general/eu_core_role/com.sap.portal.home_core/com.sap.portal.home.overview)

Hi,
It is hard to know exactly what to suggest since I don't know the full story behind the process you are trying to implement. However I can make some suggestions:
1. Use short URLs. These can be configured in the portal and will allow for easier navigation. you will see this as a "quick link" parameter in the page properties.
2. Rather then hard coding any values use a configuration table in the ABAP system.
3. If the process starts in the portal you could have your portal application send the necessary data to the ABAP system so it could use it to generate the email (e.g. Server/Port/Parameters etc...)
4. If it is a dual stack system you may be able to leverage the co-existance of portal an ABAP on the same server.
5. What about using a web service on the portal to supply the URL to the ABAP system. You could call this web service from the ABAP and have the portal provide the data that way. This would be good if your process kicks off on the ABAP side and not via the portal.
Anyway, I hope some of those suggestions help.
BRgds,
Simon

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem with restoring database from backupset

Hello,
I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
I've restored controlfile, but I couldn't restore database - it fails with:
RMAN-00571: =============================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =============================================
RMAN-03002: failure of restore command at 08/31/2006 12:06:47
ORA-01180: can not create datafile 1
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
List of backupsets from restored controlfile
(I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
Output of command restore database validate:
RMAN> restore database validate;
     Starting restore at 31-AUG-06
     allocated channel: ORA_DISK_1
     channel ORA_DISK_1: sid=102 devtype=DISK
     data file 1 will be created automatically during restore operation
     data file 2 will be created automatically during restore operation
     data file 3 will be created automatically during restore operation
     data file 4 will be created automatically during restore operation
     restore not done; all files readonly, offline, or already restored
     Finished restore at 31-AUG-06
What's wrong?
Thanks
     Paul

Hi,
I think, that everything seems to be OK.
Commands which I use to validation of existence backup:
RMAN> crosscheck backup;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
Crosschecked 4 objects
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
RMAN> restore database validate;
Starting restore at 04-SEP-06
using channel ORA_DISK_1
data file 1 will be created automatically during restore operation
data file 2 will be created automatically during restore operation
data file 3 will be created automatically during restore operation
data file 4 will be created automatically during restore operation
restore not done; all files readonly, offline, or already restored
Finished restore at 04-SEP-06
Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
Volume in drive C has no label.
Volume Serial Number is E003-9FC6
Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
29.08.2006 11:38 <DIR> .
29.08.2006 11:38 <DIR> ..
29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 File(s) 354 036 736 bytes
2 Dir(s) 56 865 202 176 bytes free
C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 file(s) copied.
Thanks
Pavel

Niggly problem with Hotmail - Sending from a third party email address

I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?

clnock wrote:
I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?
Hi,
I've had this sent items in my inbox, problem with Gmail. You can add a filter from the settings page of your gmail account. The filter should be applied to all emails from your email address [[email protected]] and skip the Inbox should be selected.
Have you tested the "Reply to" option properly? Send a mail from your BB to a friend and ask them to hit the reply button, see which account it goes to.
===========================================================
If I've helped, please click the Kudos button.
If your issue has been resolved, please mark it as solved.
Joe
===========================================================

I have problems with sync ibooks from iTunes to my iPad since i update to ios7

i have problems with sync ibooks from iTunes to my iPad since i update to ios7

first you plug your device into your computer, then you select the name of your device on the left side of itunes. then you select 'apps' from the top center of the itunes window, and you check the apps that you want to go from the computer to the device
once you've done that, you press the 'apply' button in the lower right corner
this will be the same for anything you want to go from the computer to the device
you'll select the appropriate tab at the top, then only check information you want to go from the computer the device and then hit 'apply'

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem with services hierarchy and purchase order

Hi I'm in Srm 7 EHP8(classic scenario) and i have a problem with services hierarchies:
I create a Purchase requisition in ECC with the next structure:
1.Hier
1.1 Serv1
1.2 Serv2
1.3 Serv3
Then I upload this PR to SRM(I activated the BBP_EXTLOCALPO_BADI to change to the Extended-classic scenario to upload correctly the hierarchy)
and in the SOCO I only choose the position 1.1 Serv1 and create a purchase order.
The problem is the purchase order created in ECC contain all the services of the purchase requisition, not only the service I choose(1.1 Serv1) to create the purchase order, in SRM the purchase order is correct with only one position(1.1 Serv1)
Any Idea?.
Thanks for the help.

Hi,
I have the same problem, any new about that?
Rgs,
Pedro

Problem with controlling Annotations from Excel VBA

Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End Sub

Make sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740

I have problem with some gosts on the side of the display !?

I have problem with some gosts on the side of the display !? and I want to make a back up of my mac and to take it to the store for the problem I gut !

Hello, it sounds a bit like this common problem, do get it fixed...
https://discussions.apple.com/thread/2300580?start=0&tstart=0

Problem with service consumption from ABAP side "SOAPFaultCode: 1"

Similar Messages

Maybe you are looking for