Problem with setting up AIR-LAP1252AG-A-K9
My company recently handed me 2 used 1252 AIRONET APs that they picked up somewhere to replace and add on to the current AIR-AP1121G-A-K9 that are currently used. I've been successfull at connecting via a Serial Connection in an attempt to the AP's IP via the CLI. But further attempts to connect to the AP via a web interface to continue setup have been a failure. After some research, can anyone confirm that LAP series products can only run Lightweight IOS, hence the need for a CISCO controller, or can I try to flash the firmware to make it into an autonomous AP. I've been fighting with this for a couple days and its getting frustrating. Am I blindly missing something? I've tried resetting the AP to default several times, but no luck. Much thanks!!!
The WAP can run either controller-based IOS or autonomous IOS (aIOS). Console into the WAP and reboot. Post the entire bootup process.
Similar Messages
-
hello, i have a problem with my macbook air. When i try to open my iPhoto i should wait about 3mins to get opened it and also in it just appeared around 57000 photos! in which i have 2000. they are not mine, the photos are pics of other people or things
If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I am having so many problems with my iPad Air that I got for Christmas. It is not jailbroken. Sometimes it doesn't work. The internet keeps going out all the time but it's not with my network because I got my network checked out and it was perfectly fine. Safari never works even when I am connected to the internet. All of the apps keep crashing. On the app store it doesn't let me download anything. I still have about 15 gigabytes left on my iPad Air. It doesn't let me sent or recieve messages. On the mail app it doesn't let me check my email because it just says I'm not connected to the internet even though I have all 3 bars. It is so slow. When I am on any app that acually works then it takes about 10 minutes just to load one thing. I think there is an internal problem with it or it might just need to be restored. I never dropped it and I always keep it protected so I don't know what is going on.
The wifi icon only indicates he presence of a wifi signal, not that you are connected.
First do this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Some things to try first for internet/wifi connection:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Problem with Set/Get volume of input device with single channel
from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help. -
Problem with SET GET parameters
Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
AravindHi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar -
Problem with SharedObject in AIR 3.5 IOS
Hi,
I've been compiling my ios app with AIR 3.4 since it has been released and a week ago I downloaded AIR 3.5 and uploaded my app compiled with AIR 3.5. But I realized there has been a problem with sharedobject in AIR 3.5.
I used var sharedObject:SharedObject = SharedObject.getLocal("myScores"); this code to save the game score and every time I uploaded my app it worked out. It has never lose the game score.
But with AIR 3.5 all game scores are gone. I didn't change any code about sharedobject. What's going on here? Now my customers will be upset to losing their information and even money they purchased through in-app purchase.
The thing is AIR 3.4 was fine but AIR 3.5 seems to be the problem.
Please HELP ME!!We also replied in the bug report.
It is a really serious problem.
We experienced it also in AIR 3.7.
It is only happening on iOS. Android works fine.
It happens with these both methods:
var mySharedObject:SharedObject = SharedObject.getLocal("deutscheWitze");
FlexGlobals.topLevelApplication.persistenceManager.setProperty("soundCheck", "yes");
Only some users experience the problem.
We think it has something to do with the compilation or installation of the app.
Best
omi -
Button in Bex Analyser 7.0 - problem with setting up Static Parameters
Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name Index Value
DATA_PROVIDER 0 DP_1
CMD 0 PROCESS_VARIABLES
SUBCMD 0 VAR_SUBMIT
VAR_NAME 0 0RMA_FIP
VAR_VALUE 0 004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
ALI managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered". -
Problem with setting Source Level in Sun Studio 2
I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please helpI'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1 -
Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird
The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
SteveStevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Obiee 11g . problem with set default as columnname in interaction tab
Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
SrinivasHi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v -
2 Problems with the Ipad Air...midi keyboard and usb microphone
IN SHORT:
2 Problems with the Ipad Air...what midi keyboard will connect to the lightning camera connector and what microphone as well? There seems to be issues with the ipad air not being able to power them. Has anyone got any devices to work yet?
IN DEPTH:
I have a yeti microphone that when I plug in it says its using too much power. A little samsung go mic I have plugs in find and works but isnt quite what im looking for. My midi keyboard is not reading...its probably 15yrs old (didnt expect it to work). I have ordered a usb powered keyboard but im now nervous it may not work if it requires too much power. Has anyone had any success with a particular model of keybaord? I saw a youtube video of the CME Xkey in which it was plugged into an ipad that uses the lightning jack, but was unsure if it was the air or a different model.
Any help is appreciated on this...I love my ipad air and hoping to make it my fully functional music recording device.
By the way I mostly use garagebandhey mate
Yes what I ended up doing is buying a powered usb hub. They are about 10 dollars or so on amazon.com. There are tons to choose from. I use a yeti micrphone now with no issues and a midi keyboard. You will need the lightning usb adapter too. You plug the lightning adapter into the ipad and the hub into the adapter then plug all your accessories into the powered hub. So it works well you just gotta buy an extra piece of equipment. -
Problem with setting Item level permissions lists
Hello!
I have SPS 2013 on-premised environment with AD authentication.
At some moment I've noticed that we have a problem with setting the item level permissions on any lists except the document libraries.
When I click the "shared with" button I see a popup form with a list of users who have an access to that list but there is no "invite people" link or "Advanced" link. Moreover, the "loading" ring rotates
instanly like some operation was'nt ended.
The same operation with documents in libraries works well.
I am be grateful for any help!Hi Mischael,
From your description, my understanding is that there were no "invite people" or "Advanced" link when some users clicked "shared with" button in some lists.
This issue seems like about permissions. Please log on your site with site collection administrator or a user who has full control for the site, then go to a problematic list->List settings->Permissions for this list, check whether the list
has unique permissions. Then click "Check Permissions", check the permission level for the problematic users and then go to Site Settings->Site permissions->Permission levels, check whether the permission level contains "Manage permissions".
If not, add the permission into the permission level.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,
Think you need to provide some more details about what you are connecting
-
I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported). any advice ??
Mac OS X Lion has dropped support for Rosetta, the feature that allowed you to run PowerPC apps on previous OS X systems. Check if you can find a newer version of the app you are trying to run that supports Intel processors.
What application are you trying to run? Maybe I can help you find a version that runs on Lion. -
Hello.can anyone help me plz i have problem with my macbook air i can't find image capture.
hello.can anyone help me plz i have problem with my macbook air i can't find image capture. there is nothing in progrem can i reinstall that progrem and how?thanks
If you can't find it in your applications folder you will need to reinstall your Mac OS X. Take a look at this link, https://discussions.apple.com/message/16478873#16478873
Maybe you are looking for
-
Error -1950678991 saving LV8.2 library of shared variables
I used to be able to programmatically save my library of shared variables using "ProcessToLib.vi" (set to Process mode) after changing properties of some or all variables. Now, and I don't know what has changed, I get this error: Error -1950678991 o
-
Just reloaded Windows 7 last week, and reinstalled CS5. I don't remember this happening before the reinstall. Is there a setting I am missing? Thanks in advance!
-
Hi All, I want to create a interactive report in crm7 .0.can any body help in interactive report.how to create a interactive in crm 7.0. Thanks in advance. Vishwas
-
Reference menu buttons in iTunes Store with GUI scripting
How can I differentiate a pressed/focused state of a menu button in iTunes Store? iTunes > window 1 > radio group 1 > menu buttons (Music, Movies -) I still couldn't find an attribute or property to do so.
-
I downloaded the newest version of iTunes and it posted this message when I opened the application: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. Can someone please help!