Problem with setting variable/array

hello,
in a flash template i found several buttons with almost the same action script code. on pressing the button a window popup with different text (for each button a unique text).
the following code is in the code section of the buttons, only the two last codelines are different for each button.
on (release)
_root.scrHEIGHT = 200;
_root.scroller.scroller.gotoAndStop(2);
_root.scroller._x = 100;
_root.scroller._y = 90;
_root.TM_title = "Info Box";
_root.READ = 22;
so i think that the input of the unique text for each button is handled in the last line "_root.READ = 22".
i also found in the bibliothek the belonging text parts. my problem now is that i dont know where the connection is set between the text part and the array/variable READ. in this case the connection is 22, but i dont found any property in the text part or in the property of the button where the connection is set to 22. i use flash cs4. anyone know could help me?
thank you very much,
pascal

You're welcome. For the code you showed, the scroller was the only thing that could have involved some kind of action taking place, so that's why I asked. Everything else was just a static assignment. I would have had that line last in the lineup just for the logical flow to make sense. Since the code will execute before any timeline travel is done, it works, but having that line last would have helped in making sense of it.

Similar Messages

Having problem with setting variable on a textfield

I'm using createTextField to create a textfield. I have also created a input textfield with a variable called textline1 (I don't create the inputfield with as).
I want to display the letters in the created textfiled that I'm typing in the input field. So this in my AS coed:
_root.createTextField("text1",1,100,100,300,100);
text1.variable = textline1;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = 50;
format1.bullet = false;
text1.setTextFormat(format1);
but it doesn't work. So anyone see the problem?
(sorry for bad english)

i think you're going to have more problems if you continue using textfield variables. you should not use them. just use the text property of the textfield to reference its contents.
but, if you want to continue, use:
var tl:MovieClip=this;
fontsize=20;
myInputText_txt.onChanged = function(text1:TextField) {
_root.myText_mc.createTextField("text_txt",1,100,100, 100,100);
_root.myText_mc.text_txt.variable = tl["text2"];
text2=text1.text;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = fontsize;
format1.bullet = false;
text_txt.setTextFormat(format1);
p.s. please mark this thread as answered.

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Problem with setting Item level permissions lists

Hello!
I have SPS 2013 on-premised environment with AD authentication.
At some moment I've noticed that we have a problem with setting the item level permissions on any lists except the document libraries.
When I click the "shared with" button I see a popup form with a list of users who have an access to that list but there is no "invite people" link or "Advanced" link. Moreover, the "loading" ring rotates
instanly like some operation was'nt ended.
The same operation with documents in libraries works well.
I am be grateful for any help!

Hi Mischael,
From your description, my understanding is that there were no "invite people" or "Advanced" link when some users clicked "shared with" button in some lists.
This issue seems like about permissions. Please log on your site with site collection administrator or a user who has full control for the site, then go to a problematic list->List settings->Permissions for this list, check whether the list
has unique permissions. Then click "Check Permissions", check the permission level for the problematic users and then go to Site Settings->Site permissions->Permission levels, check whether the permission level contains "Manage permissions".
If not, add the permission into the permission level.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

Think you need to provide some more details about what you are connecting

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problem with setting variable/array

Similar Messages

Maybe you are looking for