Problem with shared printer after upgrade to Maverick

Hi Guys,
I have one iMac and two windows PC which connect to the same WiFi router.
The iMac has a HP LaserJet CP2025 attached to its USB port and shared with other windows PCs with no problem.
Until I upgrade my iMac to Maverick recently, now those PCs cannot see the shared printer anymore.
Do you have any ideas what configuration is changed in the Maverick which could cause this please?
I have been searching through Apple communities and other tech forums and have tried many solution, but still cannot solve this. (I have also tried setting up LDP, but no luck so far)
PS ... Shared files seems to work fine. I can access (read/write) the shared files/folders from windows with no problem (SMB and AFP enable).
Any ideas, pointers or links would be appreciated.
Cheers,
ChaaPru

Try a reset > OS X Mavericks: Reset the printing system

Similar Messages

Problem with Hp printer after upgrade to Maverick OS

Scan pages, when saved to computer when click to save the pages and try to open saved documents their all black and have lines on them.( upgraded to mavericks OS) , before upgrade, the printer was working fine.
Mac 27-inch, Late 2009
HP Photosmart Premium Fax e-All-in-One Printer - C410a

Try a reset > OS X Mavericks: Reset the printing system

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Very slow printing after upgrading to Mavericks and reinstalling HP s/w for an Officejet 8600?

Before upgrading to Mavericks, my HP 8600s (have 2) would zing at printing. Now they are incredibly slow. I had to do a Restore after my operating system upgrade and after that, the HP folder was not in the Applications Folder. That caused me to reiinstall the HP s/w for the 8600 which I downloaded from the HP website taking care to download and install exactly as was prescribed for the Mavericks scenario. I'm wondering if the problem is that I chose the bonjour versions of each printer when I reinstalled to each printer.
An idea of what I mean by slow is a one and half page letter is taking over 5 minutes to print whereas it used to print at about 30 seconds.
I need some help on this ASAP because my home-office is at a standstill. Many thanks.
Tulsa Lawyer

Hi BerniePiel,
Choosing the Bonjour version means you have chosen the wireless option. Bonjour is a technology that is built into Mac OS and iOS. This technology discovers devices such as printers that are installed on the same network as a Mac or Apple mobile device. Bonjour is the default method for discovering devices on a network.
I can certainly help you with this. When you added the printer, did you add the printer with the 'AirPrint' driver or are you using the HP driver? Us the screenshot below to help you check.
If you do not see AirPrint next to your printer name as shown above, delete the printer and re-add it. When you click the plus symbol you need to choose 'add another printer or scanner', then select your printer and choose the HP driver next to 'Use'.
If the issue persists, or you were already using the HP driver, try the following steps.
Reset Printing System
Click the Apple icon (   ), and then click  System Preferences.
In the Hardware section, click  Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct  Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click  Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions  button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer
Once these steps have been complete, re-add the printer again, and print. Please let me know if this resolves the issue. If the issue persists I will gladly follow up and continue to work with you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac. I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver. Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

Do I need to download drivers for an HP 8600 all in one printer after upgrading to Mavericks from Mountain Lion?

I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.

Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

A problem with Wi-fi after upgrade to Nokia Belle ...

Good Afternoon
I have a problem with my Nokia 500 (Belle) (Symbian).
I was using a old system and I had my wi-if acess working but after I upgrade my system to Belli my wi-fi doesn´t work. I tried writing the same password but my connection s (Connecting. connectins and fall).
May you help me ?
Is there any configuration if I have to do ?
Thanks a Lot

Hi
Thank you for you post and welcome to the forums.
Firstly try removing the WiFi access point off you device and then reboot the device and reset the router then try re-add the WiFi access point on your phone and see if it connects. If it still doesn't work temporarily removing the password on router then try to connecting to see if this helps.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem with some apps after upgrade to 5.1 (can I downgrade it to 5.0 ??)

Dear all,
I'm experiencing some problems with apps after upgrading to 5.1, some of them just got stucked or not even start up. Is there a way of fixing this or downgrade to 5.0 ??
Thanks

you cannot downgrade, sorry.

Problem with ADF Application after upgrade to 10.1.2.3

Hello,
i have some problems with my ADF applications after upgrade of AppServer to 10.1.2.3.
The only Excteption i got is in the application.log of the container:
Error in errorPage /faces/pages/error/error404.jspx
javax.servlet.ServletException
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:614)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:556)
     at pages.error._error404._jspService(_error404.java:682)
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1298)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1428)
     at javax.servlet.http.HttpServletResponseWrapper.sendError(HttpServletResponseWrapper.java:162)
     at oracle.security.jazn.oc4j.JAZNServletResponse.sendError(Unknown Source)
     at oracle.adf.view.faces.webapp.ResourceServlet.doGet(ResourceServlet.java:169)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at oracle.adf.view.faces.webapp.ResourceServlet.service(ResourceServlet.java:135)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Does anybody know how to handle it?
Regards.
Krystian.

I am also getting the similar error if I enable a particular coloumn of a table to load into ORM , I am getting the following error,
javax.servlet.jsp.JspException     at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31)     [SRC:/jsp/standardinclude.jsp:84]     at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185)     [SRC:/jsp/displaymultiplerecords.jsp:461]     at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257)     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:534)

Problem with shared printer after upgrade to Maverick

Similar Messages

Maybe you are looking for