Problem with Sharepoint Web Front End

I have Sharepoint 2007 Farm with 2 WFE, 1 App and 1 SQL Server. The problem is, one of the WFE takes too much of time to provide response, it literally shows the page is loading... for more than 2-3 minutes. Everytime this happens, i will do an App Pool
Recycle and it fixes the issue, and the WFE starts processing request normally. This happens 3-4 times a day.
The below is a SQL Error which i got from Event log, which i suspect might be the reason.
Could not open connection using 'data source=AAA;initial catalog=PwC_CRM_Extensions;integrated security=SSPI;pooling=false;persist security info=false' in App Domain '/LM/W3SVC/1355281042/Root-2-130622646929401206'. The full exception text is: A network-related
or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes
Provider, error: 40 - Could not open a connection to SQL Server)
Please help me out on this.

Phill,
Have a look at this KnowledgeBase article:
http://digital.ni.com/public.nsf/websearch/862567530005F09C8025673000529121?OpenDocument
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Similar Messages

Problem using the Web front end

Hi
I have been playing with the Web publishing tool and I can get it working fine until I build an executable file. Then when the vi is loaded using the .exe file the web front end comes up with the comment vi not loaded into memory?
I am obviously doing something wrong but up until now I can not see it?
Any suggestinos welcome.
Cheerrs
Phill

Phill,
Have a look at this KnowledgeBase article:
http://digital.ni.com/public.nsf/websearch/862567530005F09C8025673000529121?OpenDocument
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Problem with CRM 2011 web front end cluster

Hi.
We have a CRM 2011 (RU17) environment with a SQL DB server and 2 web front end CRM server in a cluster.
Since few days (about 10) it seems that one of the 2 nodes is not working, and since yesterday many users report access problems when calling the application by cluster name - as usual since we deployed CRM 1 year ago.
I tried myself, and I can run the application by cluster name without problems. If it try the separate notes addresses, one of them works, the other doesn't.
I checked the 2 web front end servers, and are (or seem) both properly configured, with all patches installed.
Following the information I got from Event viewer. Any suggestion welcomed!
Many thanks and Best regards
On the 'faulty' server I have different errors at event viewer level:
Faulting application name: Microsoft.Crm.Sandbox.HostService.exe, version: 5.0.9690.4150, time stamp: 0x53559982
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0x6f8
Faulting application start time: 0x01cf8f93aa9a7ff8
Faulting application path: C:\PROGRA~1\MICROS~4\Server\bin\Microsoft.Crm.Sandbox.HostService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f5019a68-fb86-11e3-9f21-005056853970
Application: Microsoft.Crm.Sandbox.HostService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
The Sandbox Host service has encountered an unexpected error and has stopped.
Source: Microsoft.Crm.Sandbox.HostService.exe (1784)
Error: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Crm.SecurityUtils.GetSidFromAD(Guid objectGuid)
   at Microsoft.Crm.Sandbox.SandboxHost.SetPrivilegeUserGroupId(Guid privilegeUserGroupId)
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(Object stateInfo)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
On the 'running' server event viewer I only have one error, related to mail router:
#23379 - Could not verify the version of Microsoft Dynamics CRM at http://alkcg106.d30.intra:5555/AkzoNobelIndustrialCoatings. There was no endpoint listening at http://alkcg106:5555/AkzoNobelIndustrialCoatings/XRMServices/2011/Organization.svc that could
accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.

Apologize for not having indicated here the resolotion I got thanks to MS support...
We enabled the trace and we got
a http error page stating maxQueryStringLength was insufficient. We changed the maxQueryStringLength and QueryString values in the CRM web.config value to 10240.
We also noticed an error related to the DC being unavailable. We checked in the CRM registry hive and see in the non-working server you had a PreferredDc key pointing to “AMDNAD”. On pinging
AMDNAD we see it is not reachable. We removed the PreferredDc key and after iisreset we can navigate to crm.

The Document Conversions Launcher Service status on a SharePoint Server 2013 Web front-end server displays "Starting" but does not start or stop

I have this strange error showing up from my second Web Front End Server, "The Document Conversions Load Balancer service is stuck in starting, The status showing up "Error Starting". When I lunch the start, it runs then went back to
the same status "Error Starting" for the "Document Conversions Load Balancer Service". How can I get of rid this issue?

Hi Mannyabdon,
Based on your description, I recommend to check the things below:
1. Run the PowerShell command below to check the status of the Secure Store Service:
Get-SPServiceInstance |Where {$_.typename -like "Document Conversions Load Balancer Service"}
If it is not showing online, please stop the service first and then start it to see if the issue still occurs (the
<ServiceGUID> can be obtained obtained from the command above).
Stop the service:
Stop-SPServiceInstance -Identity <ServiceGUID>
Start the service:
Start-SPServiceInstance -Identity <ServiceGUID>
2. Check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

High availability for Web front END server

Dear All
I am unable to understand the high availability model for Web front end server
I am currently working on MOSS 2007/IIS 7 but I think for all versions it will remain the same
I am now running single WFE server and my installation mode allow for adding extra servers to the Farm
now when I add Extra server what will happen next ? should I add extra web application and site collections ? will load balancing include lists, library items and workflows
how this stuff will be stored on one database
it's too vague to me so extra explanation will be appreciated
Regards

To get a fault tolerant environment you need to do two things.
1) Add a second server that is running the the Microsoft SharePoint Foundation Web Service. That's the service that responds to calls for the web site making the server a WFE.
2) Implement some form of load balancing to distribute HTTP requests for SharePoint web sites to the two servers. This can be done with something as simple as Windows Network Load Balancing or with dedicated hardware like an F5 Load balancer.
Once you've added a load balancer and a second server you don't need to do anything else.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Deploy web application to multiple web front end servers

Hi,
I have a SharePoint farm that include 8 web front end servers and 2 application servers. I have created web application from central administration and during creation I added the public URL to refer to one of the web front end servers.
Now I want to be able to access the same web application from the other web front end servers what shall be done. I have tried to add alternate access mapping but i found that i only have 5 alternatives (Default, Intranet, Extranet,Internet and Custom) while
I need to access it from 8 different sites with the IP or name.
Can anyone tell me what is the best practice for that.
I appreciate the quick response.
Regards,
Ehab
Ehab

I have create my web application under the default port "80" I provided the URL for one of the web frontend servers machine name "http://Machine Name:80/"
For the AAMs that I have created I added some of the machines names of the web frontend servers
Internal URL Zone
Public URL for Zone
http://Machine-Name-01 Default
http://Machine-Name-01
http://Machine-Name-02 Intranet
http://Machine-Name-02
http://Machine-Name-03 Extranet
http://Machine-Name-03
http://Machine-Name-04 Internet
http://Machine-Name-04
http://Machine-Name-05 Custom
http://Machine-Name-05
Ehab

How do web front ends find the configuration database (moving whole farm to new AD forest)

We are exploring, as a possible course of action, moving our SharePoint 2007 medium farm to a different Active Directory forest (2008). There is a two way transitive trust between the source and target domains.
I have established that with such a trust it's possible to add content databases on a SQL instance in another forest, so moving content is not a big issue; we'd stand up new instances and move them: the user accounts are almost all in the target domain anyway.
However, we have a good deal of customization, including a third-party application that no longer has any support and has historically been appallingly difficult to upgrade/install fresh.
How do web front end servers find the SQL instance containing the configuration database? If the farm credentials had been previously changed to an account in the target domain, all services stopped and the configuration database moved to a new instance
with a DNS alias, would the database appear to be in the same location when SQL and SharePoint services were started on (logically) moved web front ends?

Here is more or less the high-level process for SharePoint 2007:
Mid- to high-level steps.
0. Full farm backup
1. Move users to new domain (in AD). Use stsadm -o migrateuser to migrate the old domain accounts to the new ones in SharePoint
2. Move service accounts to new domain, or create new service accounts
3. Update the farm to use the service accounts in the new domain
stsadm -o updatefarmcredentials (service accounts)
stsadm -o spsearch -farmserviceaccount
stsadm -o spsearch -farmcontentaccessaccount
stsadm -o editssp -ssplogin (for each ssp)
stsadm -o osearch -farmserviceaccount
SSO and any other remaining service accounts (CA -> Ops -> Service Accounts)
Default content access account (SSP -> Search Settings -> Default content access account)
Customizations (if there are service accounts associated with these)
3.5 Manual steps
Application pool accounts
Update permissions for SQL Logins to make sure the new accounts match the permissions for the old accounts
Add the appropriate new accounts to the DCOM IIS WAMREG Admin Service
4. Update the SQL Server service accounts. If SQL Server is shared with other applications you'll want to update the SQL Logins for these other applications as necessary and the SQL Server service accounts (DB Engine, DB Agent, Reporting Services, etc.). Might
not be necessary if this has already been done or if the SQL server is not changing domains.
5. Shut down all services on all servers in the farm (this includes SQL if you are moving to the new domain).
6. Change domain membership of all farm servers, reboot or perhaps shutdown and bring back up in the following order:
1. SQL. Verify SQL Server is running and accessible. Check event logs. Resolve any issues.
2. Central Admin server. Verify CA is accessible, check event logs. Web apps and some services may not be available if they are on servers that are currently turned off. Don't worry about these (yet).
3. Application servers, search servers, index, query, other. It's likely some or all of the WFEs will go on at this step. Verify services are accessible as expected. Check event logs. Resolve issues.
4. Any remaining WFEs. Wash, rinse, repeat.
7. Assuming everything is running as expected, users can access the sites, the sky did not fall, etc. take a full farm backup.
Hey look, here are some low-level steps too.
# updates the account used to run the CA app pool and the timer service
# must be run on the server that hosts CA
stsadm -o updatefarmcredentials -identitytype configurableid -userlogin NEWDOMAIN\farm_service_account -password Password123
# spsearch
stsadm -o spsearch -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123 -farmcontentaccessaccount NEWDOMAIN\crawl_service_account -farmcontentaccesspassword Password123
# osearch
stsadm -o osearch -farmcontactemail [email protected] -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123
# ssp service accounts
stsadm -o editssp -title SSP -ssplogin NEWDOMAIN\ssp_service_account -ssppassword Password123
# Manual steps
SSP Admin -> Search Settings -> Default Content Access Account
Application pools: CA -> Operations -> Service Accounts -> Web Application Pool (or use gl-updateapppoolaccount if available)
iisreset /noforce
Copy SQL permissions to the new accounts. Not sure why this doesn't happen.
SSP Service Account
Farm Account
Setup Account (not copied because it doesn't own anything, just used to kick off the DB for the other accounts)
Search Service
Add accounts to DCOM not sure why this didn't happen
Component Services -> Computer -> My Computer -> DCOM Config -> IIS WAMREG Service
Farm account
Application pool accounts
Search Service
SSP Service
SSP Admin
Then the fun part. Move the server into the new domain.
Check for AAMs to see if they reference the current domain. If so, change to the new one.
Stop all SP services. Join new domain.
The computer name is a netbios name in SP, this should be painless.
Some general notes from my experience doing this:
1. There is no way to update application pool identities with stsadm (I haven't explored using Powershell). You have to go through CA -> Service Accounts to update these.
2. Some SQL logins and permissions were not created. I compared the permissions before to the permissions after and copied the ones that didn't transfer. This resolved all database access issues.
3. Had to grant permissions for the service accounts in the DCOM configuration for the IIS WAMREG admin service. I expected this to happen automatically but was not surprised given the history of CLSID 61738644-F196-11D0-9953-00C04FD919C1.

Solutions - Seeking input for web front end to storage

I am being bound by business process and privacy issues, and we want to keep our storage in house.
At the same time, all our users see and love drop box and google drive. So how can we, in our own private cloud, setup a web front end to our exisitng storage. Is there some MS product that will already do this? Points to consider,
will it integrate with DFS? SSL? Still be able to map drives directly from in office locations. Encryption (far back seat) options would be awesome. An MS product would be prefered, but are there other solutions??
Am I over thinking this? can I just setup a web server, and maybe code something in house?
BlankMonkey

Hi,
If you need an application works like Google drive or Dropbox, it seems that OneDrive for Business and/or SharePoint online could help:
OneDrive for Business
http://office.microsoft.com/en-us/sharepoint-server-help/what-is-onedrive-for-business-HA102822076.aspx
OneDrive for Business seems more close to your requirement if you just need a place for storing data on private cloud.
SharePoint Online
http://office.microsoft.com/en-us/sharepoint/sharepoint-online-online-collaboration-software-FX103789366.aspx
If you need additional functions, SharePoint Online as well as Office 365 may help.
If you have any feedback on our support, please send to [email protected]

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

How to track the APEX Web front-end Users ?

Hi All,
I would like to track who uses my Web front-end and hence, would like capture a list of all NT logins when they login for the first time. I would also like to capture the date they last logged in.
Can I keep this record somewhere in the background where it can be accessed by key people.
Please suggest the way out for this?
Thanks,
Himanshu Tiwari

Hi,
Yes you could quite easily incorporate this as part of your own custom Authentication routine, you can read more about writing your own authentication routine here -
http://www.oracle.com/technology/products/database/application_express/howtos/how_to_change_auth_method.html

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

Business One and Open Source Web Front-Ends, PHP etc.

Hi there,
I am a complete newbie to all things SAP, so please excuse my ignorance.
I am trying to implement a solution for SAP Business One, including a web front-end for queries and information. The SAP backend is running on a SQL Server, Windows 2000.
The catch is, I won't be running the web front-end off a Windows server. I need to find a solution for an Apache server, running (probably) PHP but could be JSP or any other scripting language to access SAP - but it will be running on a separate server, non-windows.
I have been given examples of people getting access to the DI Server using PHP, but it all involves a call to a COM() function that won't run from anything except a Windows server.
How can I acheive the same result running a PHP page from an OpenBSD or Linux / Apache server? Is the DI Server the right thing to be looking at, or am I going in completely the wrong direction?
Any help would be appreciated.
Thanks,
Nick.

post your question in SAP Business One SDK for better response.
Regards
Raja

Problems with Java web start

Hi All,
I am facing a problem with Java Web Start. Which is the most appropriate version of JDK recommended for SAP XI? I tried
JDK 1.4.2_04
JDK 1.4.2_09
JDK1.4.2_11
JDK1.5.0_01
When I click on Integration repository or Directory for the first time, it loads the jar files and while loading, I get an error msg "Unable to launch Integration Builder". After a lot of retries I get sucess. But still we are facing this issue in some machines. Can you pls let me know if there is any pre configuration or some thing I am missing...
Regards,
Jai Shankar

Did you check the proxy settings in JAVA Web start. Please follow the below instructions.
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Java Webstart

Firefox is having problems with certain web sites, but IE is ok

Top of page is present in IE but not in latest Firefox.

Is it a safe assumption that website is your's? <br />
What difference does it make which browser '''''you''''' use? Isn't your website for client's or potential clients?
That said, I don't have a problem with that web page on Firefox 2.0.0.20, 3.0.19, 3.5.16, 3.6.13, or the 4.0b9 nightly - it looks the same as in IE8 on 32-bit WinXP SP3, with an AMD 64-bit processor.
The problem shown in your screenshot is with your own Firefox installation. It's like all the "styling" is turned off.
''''' "I infer Firefox needs a 64 bit version." ''''' <br />
What good is a 64-bit browser without 64-bit plugins? <br />
Adobe still hasn't released a 64-bit version of Flash, although they do have a "preview" version available. <br />
http://kb2.adobe.com/cps/000/6b3af6c9.html
''BTW, Mozilla does have a Windows 64-bit version of the Firefox 4.0 betas that is being tested now, but it is not going to be released in Jan / Feb when Firefox 4.0 is released. It will probably be released later in 2011 with one of the 4.# versions, I suspect right after Adobe has a 64-bit Flash release version.''

Problem with Sharepoint Web Front End

Similar Messages

Maybe you are looking for