Problem with Shipment

Hello All,
The problem is related to shipment where I want the system to allow processing shipment after Stock Transfer Invoice is done.As we don't get all the on-paper documents before despatch or even after 10 days of despatch we want the system to process in this way where even after the invoice is completed we will be able to book the shipment cost through T-Code VI01.But whenever I am trying to process shipment through T Code VT01N by giving transportation planing point & shipment type,while including the delivery it is showing the message " No deliveries found".
Though the standard rule is PGI will automatically happen with the completion of shipment process still please suggest if any further configuration can be done in the standard SAP to process shipment after the stock transfer Invoice is done.
Please help at the earliest.
Thanks & Regards
Priyanka Mitra

Hello All,
Now my problem is solved as in VT01N screen while including the outbound delivery we have to keep the "Total Goods Movement Status" & " Transportation Planning Status" fields as blank instead of A & A to B.If these fields are kept blank then we will be able to make shipment after the Stock Transfer Invoice.
The other queries related to shipment are as follows -
1) Is there any configuration possible to keep the "Total Goods Movement Status" & " Transportation Planning Status" fields as blank by default.
2) Secondly the shipment cost calculation procedure is getting reflected in the header though it is not assigned with the header but it is automatically getting reflected in the Leg. How is this possible?
Please suggest.
Thanks & Regards
Priyanka Mitra

Similar Messages

MRP Run Problem With Shipment Notification

Hi Experts,
Issue
In MD04 i have 1 shipment Notification,but after MRP Run it should get display in MD05 but in my case it is not happening.CAn anybody tell me the possible causes / reasons why this is happeinig.
Awiitng for your quick response
Need any furher inputs please revert back to me immediately.
Cheers,
Kumar.S

Hi karthik,
Thanks for your reply,even i know Md04 is Dynamic and MD05 is static,also i cant able to clearly understtood what u r telling,
Kindly check whether shipment notification is updated during the 2nd run then it wont reflect in MD05
but when i check the same scenario in Q shipment notification getiing updated but not in prdn.
Pls clarify
Cheers,
Kumar.S

Problem with HU_PACKING_AND_UNPACKING to pack within shipment (VT02N) ?

Hello All,
Iu2019ve created a shipment with materials and Handling units with function BAPI_SHIPMENT_CREATE.
I see the materials to pack and the Handling units but they are not packed together.
i try to use function HU_PACKING_AND_UNPACKING but it doesn't work
i think i have a problem with an internal table GS_HEADER51 which is empty when i try with my propgram
i have got a fatal error sy-subrc = 8
How can i do ?
is HU_PACKING_AND_UNPACKING the right fiunction to pack in shipment ?
Thanks for your answer,
Regards
MY
Edited by: MY on May 6, 2010 9:19 AM
Edited by: MY on May 7, 2010 9:19 AM

Hello All,
Iu2019ve created a shipment with materials and Handling units with function BAPI_SHIPMENT_CREATE.
I see the materials to pack and the Handling units but they are not packed together.
i try to use function HU_PACKING_AND_UNPACKING but it doesn't work
i think i have a problem with an internal table GS_HEADER51 which is empty when i try with my propgram
i have got a fatal error sy-subrc = 8
How can i do ?
is HU_PACKING_AND_UNPACKING the right fiunction to pack in shipment ?
Thanks for your answer,
Regards
MY
Edited by: MY on May 6, 2010 9:19 AM
Edited by: MY on May 7, 2010 9:19 AM

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

Problem with ASP "Create form wizard" or "Update form wizard" and "Upload file"

Until now it used version 3,7 and dinamyc had never had problems with "Create form wizard" or "Update form wizard" and "Upload file" but now when I create the form and shipment a file leaves an error to me:
Error:
Error al borrar directorio. Error de seguridad.
Developer Details:
Error al borrar directorio. Error de seguridad. El directorio 'E:\web\eds\maqueta\' esta fuera del directorio base 'E:\web\eds\maqueta\fotosactivi2\'. (FOLDER_DEL_SECURITY_ERROR)
tNG Execution Trace - VIEW
* tNG_insert.executeTransaction
o STARTER.Trigger_Default_Starter
o tNG_insert.doTransaction
+ BEFORE.Trigger_Default_FormValidation
+ tNG_insert.prepareSQL
+ tNG_insert.executeTransaction - execute sql
+ tNG_insert.postExecuteSql
+ AFTER.Trigger_FileUpload*
+ ERROR.Trigger_Default_Insert_RollBack
* tNG_insert.getRecordset
* tNG_insert.getFakeRsArr
* tNG_insert.getLocalRecordset
* tNG_insert.getFakeRecordset
* tNG_insert.getFakeRecordset

Hello,
Please see this thread http://www.adobeforums.com/cgi-bin/webx/.3bc3c678/2
for the same problem.
Regards,
Razvan RACASANU

I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.

iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done.

Problems with CS5 Web Premium Disks Being Unreadable

I pre-ordered my CS5 Web Premium update and finally received the three disk set on May 6. Attempted to install and the first disk which was the Suite installed fine. The other two disks were unreadable. I called Adobe support and they shipped another set to me which arrived today, May 12, and the same thing happened with the same two disks - Adobe Acrobat and CS5 Content. The disks are unreadable on five of my Macs and three windows machines.
Called tech support and was bounced around from Customer Service to support in India and back to Customer Service and finally told them I just wanted a refund after about ninety minutes on the call. I do find it funny that I was passed to Tech Support to "troubleshoot" unreadable disks.
A simple solution which nobody at Adobe seemed to grasp is to allow you to download a copy even if you paid for a shipped copy. I am amazed that this is not an option. So now I will eat the shipping costs and send my box back to Adobe and wait for what will probably be months before they credit my card back for the purchase.
Anybody else having problems with the install disks?

CS5 loads fine but Acrobat is unreadable and the Content disk is unreadable. The CS5 trial download doesn't include the content or Acrobat. Acrobat is a windows only download. So the trial download only installs what comes on disk 1 which is the only good disk of the three in the shipment.
A guy I talked to in Tech Support acknowledged that they produced a bad batch of disks and it seems I got two shipments of bad disks.

Delta problem with datasource 2LIS_08TRTLP

Hello everybody,
I'm having a problem with the delta to datasource 2LIS_08TRTLP.
I follow this tasks:
1 - I did a deletion of setup table data in transaction LBWG for application 08 and checked Shipment document and Shipment Costs.
2 - Transaction VTBW -> Execute this transaction with the fields "Shipment Number" and "Created on" empty.
3 - Execute a infopackage with update - "Initialize Delta process - Initialization with Data Transfer".
I don't have problem with this 03 tasks, the data come from ECC without problem.
But when I execute a infopackage with "Delta Update" the Monitor - Administrator Workbench show me 0 from 0 records "No data available, data selection ended ".
What is wrong in my tasks? Why the delta don't work?
Thanks.
Paulo Sampaio

Hi,
Your Process is correct for initialization load. But when you are running the delta there should be a V3 run for this datasource in ECC system, then it captures the deltas.
Till you have pulled all the full load data to BI, but there is no data available in the delta tables for this datasource, since you have not run any V3 run for this. That is why it is showing zero from zero recrods.
There must be some positings in ECC to the database tables related to this datasource after your initialization run, then only after running the V3 to capture the new/changed records it updates to Delta Queue (RSA7), then we will get the records to the BI.
Otherwise check the data source data in RSA7 tcode.
Hope this helps.
Veerendra.

I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014

I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014

No you cannot. The iPhone warranty is only good in the country of purchase. You would need to bring it back to the US, or send it to someone that could take it to an Apple store in the US. Apple will not accept international shipments.

Game problem with new 17" iMac (got it 3 days ago)

This has happened about 6 times now while playing the starcraft on my new 17" iMac computer. While playing all of a sudden the game will crash and give me a error message which says that due to a unknown error the application starcraft has been forced to close...I just bought this computer because I heard they are more reliable then PC's but what is going on, I really don't know where to post this question but the game requires the cd-rom to be in the drive to play it so I don't know if it is a cd-rom problem or problem with the actual computer...please help me out here.
System information:
Hard Drive - 500gb
Ram - 2 gb
Processor - dual core 2.16
CD Drive - Superdrive
if you need to know anything else just let me now.
17" iMac Mac OS X (10.4.9)

Theorectically, it should run as long as it has been patched.
From Blizzard's support site:
At this time we have not announced plans to release a Universal Application update for our older titles to natively support Intel Macs. All existing titles that natively support Mac OS X (including StarCraft) will run on Intel-based Macs via the Rosetta binary translator included with Mac OS X.
StarCraft will require the Mac OS X Native Installer to install and play the game on an Intel-based Macintosh computer. Recent shipments of StarCraft include a Mac OS X Native Installer on the installation disc. However, players without a Native Installer on their installation disc may need to download the installer from our Patch Installation web page.
At this time there is no Carbon version of the StarEdit (StarCraft Campaign Editor) application, and there are currently no plans to create one. StarEdit will not run on an Intel-based Mac as a result since the Classic environment is not supported under Mac OS X.
StarCraft patches (including the game and Mac OS X native one) can be found here:
http://www.blizzard.com/support/?id=msc0411p
There are also special instructions available there. I don't play StarCraft so I can't guarantee success but this is your best bet for now. Good luck.
iMac Core Duo (20") Mac OS X (10.4.9)

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problem with threads and camera.

Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while((!performing.isShown()) && (backgroundCamera.isShown())){
                    Thread.yield();
                notifyAll();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    this.wait();
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?

Hi,
I've finally managed to work this fine.
The code:
       Object o = new Object();
       display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while(!performing.isShown()){
                    Thread.yield();
               synchronized(o) {
                  o.notify();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    synchronized(o) {
                       o.wait(1);
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();

Problem with threads hanging

We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy

Problem with Shipment

Similar Messages

Maybe you are looking for