Problem with showing focus points in 3.5.1 & 10.9

I cannot always display the focus points either by using Option + F or View > Show Focus Points on my MBP, late 2012.
Prior to 3.5.1 & 10.9, either one of these commands would always display or remove, the focus points.
At times I can restore the focus point display by either closing and opening Aperture or by rebooting OS X. Today, nothing restores this function.
Anyone else with this problem or hopefully know of a solution?
Thanks, Bill
FWIW Apple, where is Aperture 4??

Clem
There is some data in Console.ap, the latest being about 45 minutes ago. With a filter set for APERTURE there are several references to :
"12/3/13 2:53:02.038 Aperture[1324]: The function `CGContextClear' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance."
and a 13 inch screen full of generally single items. I do not know how to read / use this info.
After your message, I went to Aperture and used Option + F, View > Show Focus Points and moused over the small icon representing focal points in the upper right hand corner of the inspector with the info tab selected (just under the JPEG icon) several times but that did not generate any new data in Console.ap.
Hope this is what you were refering to.
Bill

Similar Messages

TS2518 I have Aperture 3.1.2 running on os 10.6.8. Aperture does not show focus points on my Nikon D7100, nor does it recognize the RAW files. Will upgrading Aperture allow me to see the focus points and RAW files again? Also, do I need to upgrade my os f

I have aperture 3.1.2 running on os 10.6.8 mac book pro. Lost some features in aperature when I upgraded my camera (no longer shows focus points, does not recognize RAW files) Would like to upgrade to aperture 3.5, but do not want to loose any pictures in my extensive library. Do I have to upgrade one vesion at a time, or can I jump? I believe I also need to upgrade my os, but not sure which to do first? Any help would be appreciated...

1. Can I get Icloud without having to upgrade to OS Lion?
Nope, you need 10.7.
2. If I upgrade to OS Lion, does this automatically put me onto ICloud
No, you set that up yourself.
3. I have three mobile me email addresses. One for myself, one for my wife and one I use for my business. What happens to these.
You can convert them to be used in iCloud.
4. My wife and I also use mobile me to sync our calendars across an Ipad (original) and two Iphones (3Gs). Both Iphones and Ipad are still currently using IOS4, and I am reluctant to upgrade this to IOS 5 as I have heard some horror stories. If I fail to upgrade to IOS 5, will this create confusion with my Apple ID's. (There already is a lot of confusion with these- Apple appear to not have down their homework)
If you don't change the settings you have now, I'm sure it will stay working. I believe Apple is phasing out MobileMe and you'd be forced to upgrade eventually.
5. Will Icloud allow me to transfer my Icalendar across seamlessly? This is Ical 4.04 whic came with my Imac. Does this get upgraded if I update to Lion?
Yes, it will get upgraded. I have my calendar on Lion and my iPhone 5.0.1 working seamlessly at the moment. That doesn't mean you won't have problems because with new technology that can be expected. Make sure you do a back up if you're worried about losing data.

Show focus points - not showing...

I'm shooting with a 1D Mark III, and when I select "show focus points" not seeing the focus points...
Is this supposed to actually show where my focus point was on the shot(s)
That would be very helpful. What am I doing wrong?

Allan Eckert wrote:
I don't know what Kirby is talking about. He seems to be answering someone else's question.
It reads pretty clearly to me.
The camera has a sensor. Additionally, it has an array of focus-sensors that are fixed in position relative to the main sensor. Which of these focus-sensors was used by the auto-focus system to determine the focusing distance is what is displayed by the feature under discussion.
The point I'm trying to make is that the "focus point" in the discussion refers to which exact focus-sensors in the camera were used to achieve auto-focus. Unless your camera and your subject did not move between the time of focus-lock and the time of exposure, there will not be an exact correspondence between the spot on the sensor that is associated with that focus and what is depicted under that spot in the image.
In my practice, I find it much more awkward and time-consuming to select a focus point while the shot is framed than it is to focus with the central cross-type focus-sensors, lock focus, and then frame the exposure. So for me -- and I think many others -- knowing which focus-sensor was used by the auto-focus system doesn't tell me anything: there is no correspondence between the focus-sensor used and the image.
In the linked blog post, the author shows an image with the selected focus-sensor super-imposed over the model's upper eyelid. IME, it is assuming too much to assume that the autofocus system used that spot on the model's face when it determined the focusing distance.
There are programs that will analyze the actual image and attempt to show what parts of the image are in sharpest focus. Aperture does not do that.
This is -- as I indicated -- tangent to the OP's question. But the way s/he worded the question made me think that s/he things there is a certain one-to-one correspondence between the focusing-sensor used and the objects depicted under that focusing-sensor when it is superimposed over the image. There is not. I found that important to know, and so I pass it along.

Problem with comma and point

Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
Martin

Hi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

We have problem with showing warnings "Inline with Field"s.

We have problem with showing error messages "Inline with Field"s.
1. We have a package ERROR, that collects all errors/warnings. It has a procedure PUT, that saves errors in the variables of the package.
Package ERROR
procedure put(ptable in varchar2, pcolumn in varchar2, pcode in varchar2, pmsg in varchar2);
end;
2. We have a database table. Its values are validated by a trigger (saving business rules).
If an error occurs, then the trigger calls the procedure PUT ( to save an error message).
For example ...
CREATE TRIGGER ...
--- Rule 21
if substr(:new.ka_kood,1,1) != :new.s_kat then
error.put('TABLE1','COLUMN1', -20167, ' MESSAGE 1 !');
end if;
END;
3. I have a form of HTML DB that updates the table TABLE1
I want to show this error message with the field COLUMN1 (Inline with Field) .
I need same validations before and after updating values.
Before update - to validate same input; after update - to show errors saved in the package ERROR.
I also tried to use the global variables. For example ...
WWV_FLOW.g_validation_ids_in_error(1):= 192645056564169139;
WWV_FLOW.g_item_ids_in_error(1):= 192644674113169137 ;
WWV_FLOW.g_validation_message(1):='MESSAGE1';
And this did not help.
To rise errors in programs - is there same API ?
Or there is some other solutions ?
How can I do this in HTML DB?

Andres,
I'm not sure exactly what you are trying to do. But perhaps this will help some. If your after-submit process runs DML that causes triggers to fire, which result in error messages to be accumulated in package variables, you could create a branch on the page that would be conditional on the existence of error messages in the package variables. The branch could be back to the same page or to a more customized error page. The page you branch to would use the error messages in the package variables to determine how to format the page with the error text. The key to doing this is to run it all in the same database session. The way to do that is to use a "direct" branch, i.e., one that does not do a URL redirect. You create this type of branch with the Create Branch wizard (Branch to Page) and do not check the "Branch to page using redirect" checkbox when you see it.
Be sure to roll back any changes you do not want committed before the branch.
Using HTML DB global package variables for anything like what you described is not supported.
Scott

Show focus point doesnt work

when i put on show focus points it does not show me(( what can i do it will be work??

Definatlely have the same issue. When I import in iPhoto and go back to Aperture they're gone. If I import in Aperture, they're there.
I would think this is just some exif data that iPhoto shouldn't touch?
So much for fully sharing libraries/functionality.

Show focus points not available

My pictures used to all have the option of showing the focus points in Aperture. I would click on the icon for focus points to toggle it on and off.
Starting last year the icon for the focus points is not even there under the Info tab (same camera and lenses). i just received a new camera body but same lenses.
Pictures still do not have the icon for Focus Points. Going to the menu and choosing "show focus points" does no good because the icon is not there (but the icon for jpeg/raw, metering, and wb are there). if i go to some old pictures the icon is there for the old pictures.
i re-downloaded the program, trashed the preference files, etc.
Camera- Canon 40D, Canon 7D mii. Lenses CAnon 17-55 f/2.8 and Canon 70-200 f/4, non IS.
Any help would be appreciated.
Terry

I just checked one of my photos in Aperture for you..... it is the only reason I've kept aperture to be honest! Mine still works on my raw photo which is from a 5dmiii. I'm in the process tho of moving all my photos to external hard drives and only keeping current photos on laptop due to storage issues. I'm also switching to Bridge, ACR and PSCC. But when I open projects from Aperture off of hard drive I get a message that says I need to upgrade library and opens in Aperture. I don't want to be bound to Aperture anymore. What if I don't have Aperture on next Mac? So not how do I get my photos unhostaged? Sorry about rant.... just very frustrated if I have to go through some long drawn out process to get this straightened out.

Problem with showing caller information on E90

I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
Regards,
-mats-

unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

Problem with showing mp3 album art in list view.

Hello.
I have litle problem with showing mp3 album artwork in list view.
In SNOW LEOPARD all work fine, and all mp3 files have album art's preview in list mode in finder.
But in LION i have only default preview mp3 icon.
Option "Show icon preview" is already on!

I have the fix!!!!
I have had the same issue ever since Lion. Its been very painful not having album art preview in finder or the play button when rollover the file for so many versions of OSX. Today I worked hard in trying to solve the problem since Applecare support hasn't helped much, all they did was tell me to bring the computer in. The other main reason I got so motivated to try and fix this is because the DJ app for Mac only reads album art from the finder even if iTunes can display the album art. The other reason that got me curious is that my friends macbook pro album art worked fine, so I cross checked with his computer until I figured out a few things that helped and ultimately fixed the issue. FINALLY!
My set up:
- I have my full iTunes library folder on my external as I have over 700GB of music.
- It includes all my database files in there, which is very important as I have many playlist settings from over 7 years of iTunes activity.
SOLUTION:
1. With every new computer I have purchased, I use to just pressed option on Mac and press iTunes to locate my folder (which I have said is located on my external drive).
2. I tried today to press option again BUT locate and selected the default library in the user/music folder of my internal drive (standard setting from Apple).
3. Miraculously, all the album art appeared in both my external drive library and also today's downloaded songs on my Macbook pro. Ofcourse with the new default location I don't have any songs or data.
4. So I tried to find a way to keep this library data on my internal drive since it can help the finder display all my files properly, yes even have the play on rollover button but as well link it back to my external drive with all my 700GB songs.
5. I then went into iTunes Preferences/Advance tab and in iTunes Media folder locationredirected the location to my external drive iTunes/ iTunes Media folder. If it asks to collate data, press NO.
6. Then I quit iTunes.
7. Next I copied the 4 files to my desktop from my external drive as I want to keep the data I have made with all my playlists etc. The four files are iTunes Library Extras.itdb ,iTunes Library Genius.itdb , iTunes Library.itl , iTunes Library.xml
8. I then went to my internal drive User/Music/Itunes/ and dragged these 4 files I copied from my external drive into here and making sure to REPLACE the four existing files already there.
9. Next open iTunes and you will find all your presettings appear with all your music linked to your external. What this does is keep the important library files on your internal drive (that somehow makes your finder files album art appear), BUT to read also all the music mp3 files located in the external drive (action from step 5)
Presto!! All your music files whether on internal drive or external all the album art has appeared.
Hope this helps!! Let me know if there are any other questions.
I am on 10.8.1 running retina macbook pro.

Show focus points in lightroom

I have Canon DSLRs and the EXIF metadata clearly contains the focal points that the camera focused on (I can see it with Canon Digital Photo Profiessional)
I'd like to have the same view in Lightroom, i.e. Lightroom gives me a "viewfinder-like" overlay that shows the focal points which the camera was using.

That query shows no results (for me).
This one shows other messages with focus points in their text:
https://forums.adobe.com/search.jspa?q=focus+points

Show focus points?

Is it possible to show the focus points?
C1 Pro do not have this function so have to go back to Canon DPP to verify if camera problem or wrong operation.

>No...the camera companies don't document that info.
Well, that has not stopped adobe in the past. It is only when the camera company both does not document and "encrypts" or "obscures" data that adobe seems to develop legal concerns.
I am trying to think what info camera companies do document...
However, I'm guessing you are suggesting that because the info is not documented it is not worth adobe's time to figure it out.

Problem with Color Sampler Points

I'm using PSCS4 on a Mac Pro, and recently upgraded to Snow Leopard 10.6.3 from Leopard 10.5.8.
I regularly use color sampler points in Photoshop when adjusting curves. I seem to be having problems getting a sampler point to show up in the info palette when shift-clicking with the eye-dropper tool, or directly using the color sampler tool. I've also tried shift-clicking from within the Threshold command, but the points I click just don't seem to take a sample and show up. I never had this problem before. I'm bringing RAW, sRGB and ARGB digital images into PS from Bridge, and have tried 8 and 16 bit.
After trying for awhile, sometimes it just suddenly starts working again. For instance, I was writing this post after not being able to get PS to take samples. Then I went back and forth between the internet and PS, and it started working all of a sudden. Very odd.
Anyone else seeing this? Am I doing something wrong? Any workarounds?
Thanks, Lou

Thanks, Mark. You may be right, and I will try it.
I have my workspace setup saved, but I presume it is lumped in with all the other preferences. Is there a way to "Export" my saved workspace setup from Photoshop, so after I trash my preferences, I can reimport at least my workspace? I didn't see the ability to do that, but it may be hiding somewhere. I like my current dual monitor setup and prefer not to have to 'redo' it from scratch.
Thanks,
Lou

Problem with configuration supporting point in MD62

Hi,
well I have detected a problem with my planned independent requirements for some materials.
The materials that are concerned are semifinished product which have an active BOM.
Example :
material A composed with material B and C.
On the material A I have the strategy group 54. For these materials I have "VSE" PIR.
The problem is that for many materials, the VSE needs can not be seen by components.
Example, on material A, I have a VSE need on 15.02.2010, MRP generates a planned order on 15.02.2010 on material A. No problem but I have in MD04 an alert 52 for these PO.
I go to material B or C in MD04 and I don't see any needs ! The planned order needs have not been splitted to the components.
I have seen that if I go to MD62 for material A and if I click on "Configuration supporting point", everything is OK after next MRP Run but the problem seems to go back after few days.
The strange thing is that it works perfectly for some materials and it doesn't work for others materials although there is no differences between data of these materials !
Finally, I have to say that program RM60RR20 is turning every night and I have seen that there are some calls to function DELETE_SUPPOINT. Maybe this program is deleting the supporting point but it should recreate the supporting point after...
Is there anybody which know how this program is working or why sometimes my supporting point is deleted without being recreate ?
Thanks.

Hi Frederico,
Have you tried typing the query in query manager and are you sure you've selected the correct column? You can check the column name if you switch system information on and verifying the values in the database for that column.
Hope it helps,
Adele

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

Problem with showing focus points in 3.5.1 & 10.9

Similar Messages

Maybe you are looking for