Problem with showing palette component which contains swing components

hello, I have found a simple problem with jdeveloper IDE but this simple problem delays my project and it make late a big project so help me please. I want to add somes swing components to a JFrame
but when I try to show the palette component as usual I didn't find the swing components like habit.
Best Regards

duplicate
Frank

Similar Messages

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

We have problem with showing warnings "Inline with Field"s.

We have problem with showing error messages "Inline with Field"s.
1. We have a package ERROR, that collects all errors/warnings. It has a procedure PUT, that saves errors in the variables of the package.
Package ERROR
procedure put(ptable in varchar2, pcolumn in varchar2, pcode in varchar2, pmsg in varchar2);
end;
2. We have a database table. Its values are validated by a trigger (saving business rules).
If an error occurs, then the trigger calls the procedure PUT ( to save an error message).
For example ...
CREATE TRIGGER ...
--- Rule 21
if substr(:new.ka_kood,1,1) != :new.s_kat then
error.put('TABLE1','COLUMN1', -20167, ' MESSAGE 1 !');
end if;
END;
3. I have a form of HTML DB that updates the table TABLE1
I want to show this error message with the field COLUMN1 (Inline with Field) .
I need same validations before and after updating values.
Before update - to validate same input; after update - to show errors saved in the package ERROR.
I also tried to use the global variables. For example ...
WWV_FLOW.g_validation_ids_in_error(1):= 192645056564169139;
WWV_FLOW.g_item_ids_in_error(1):= 192644674113169137 ;
WWV_FLOW.g_validation_message(1):='MESSAGE1';
And this did not help.
To rise errors in programs - is there same API ?
Or there is some other solutions ?
How can I do this in HTML DB?

Andres,
I'm not sure exactly what you are trying to do. But perhaps this will help some. If your after-submit process runs DML that causes triggers to fire, which result in error messages to be accumulated in package variables, you could create a branch on the page that would be conditional on the existence of error messages in the package variables. The branch could be back to the same page or to a more customized error page. The page you branch to would use the error messages in the package variables to determine how to format the page with the error text. The key to doing this is to run it all in the same database session. The way to do that is to use a "direct" branch, i.e., one that does not do a URL redirect. You create this type of branch with the Create Branch wizard (Branch to Page) and do not check the "Branch to page using redirect" checkbox when you see it.
Be sure to roll back any changes you do not want committed before the branch.
Using HTML DB global package variables for anything like what you described is not supported.
Scott

Problem with showing mp3 album art in list view.

Hello.
I have litle problem with showing mp3 album artwork in list view.
In SNOW LEOPARD all work fine, and all mp3 files have album art's preview in list mode in finder.
But in LION i have only default preview mp3 icon.
Option "Show icon preview" is already on!

I have the fix!!!!
I have had the same issue ever since Lion. Its been very painful not having album art preview in finder or the play button when rollover the file for so many versions of OSX. Today I worked hard in trying to solve the problem since Applecare support hasn't helped much, all they did was tell me to bring the computer in. The other main reason I got so motivated to try and fix this is because the DJ app for Mac only reads album art from the finder even if iTunes can display the album art. The other reason that got me curious is that my friends macbook pro album art worked fine, so I cross checked with his computer until I figured out a few things that helped and ultimately fixed the issue. FINALLY!
My set up:
- I have my full iTunes library folder on my external as I have over 700GB of music.
- It includes all my database files in there, which is very important as I have many playlist settings from over 7 years of iTunes activity.
SOLUTION:
1. With every new computer I have purchased, I use to just pressed option on Mac and press iTunes to locate my folder (which I have said is located on my external drive).
2. I tried today to press option again BUT locate and selected the default library in the user/music folder of my internal drive (standard setting from Apple).
3. Miraculously, all the album art appeared in both my external drive library and also today's downloaded songs on my Macbook pro. Ofcourse with the new default location I don't have any songs or data.
4. So I tried to find a way to keep this library data on my internal drive since it can help the finder display all my files properly, yes even have the play on rollover button but as well link it back to my external drive with all my 700GB songs.
5. I then went into iTunes Preferences/Advance tab and in iTunes Media folder locationredirected the location to my external drive iTunes/ iTunes Media folder. If it asks to collate data, press NO.
6. Then I quit iTunes.
7. Next I copied the 4 files to my desktop from my external drive as I want to keep the data I have made with all my playlists etc. The four files are iTunes Library Extras.itdb ,iTunes Library Genius.itdb , iTunes Library.itl , iTunes Library.xml
8. I then went to my internal drive User/Music/Itunes/ and dragged these 4 files I copied from my external drive into here and making sure to REPLACE the four existing files already there.
9. Next open iTunes and you will find all your presettings appear with all your music linked to your external. What this does is keep the important library files on your internal drive (that somehow makes your finder files album art appear), BUT to read also all the music mp3 files located in the external drive (action from step 5)
Presto!! All your music files whether on internal drive or external all the album art has appeared.
Hope this helps!! Let me know if there are any other questions.
I am on 10.8.1 running retina macbook pro.

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Problem with showing caller information on E90

I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
Regards,
-mats-

unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice

Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support

I have problem with the security question which i forgot the answer how can i change it as i already have apple id and password

I have problem with the security question which i forgot the answer how can i change it as i already have apple id and password

You may reset the password on your account by opening https://iforgot.apple.com/ in Safari and entering your Apple ID (your email address, which the moderators should have removed earlier).
You won't be able to set the password to your email address, or a recently-used password (if I remember correctly).
Once you change your password, you should update your password on your iOS device in Settings > iTunes & App Store, then tapping the "Apple ID: <username>" cell at the top to re-enter your password. (Your iOS device may prompt you for the new password before getting to Settings as well.)
Hope that helps. If you have a different issue, please post a follow-up message.

Problem with Duplicate Movie Clip which is tracked in an Array

I have a problem with my inventory code using Shared Objects.
What i did was to track the collected items in an array. Each time
the user collects an item, the original iconMC is duplicated and
loads a picture of the item (function loadImage). However, my
problem is that this retains the original array so even if I
already added new items into the inventory, the newest item doesn't
show. original array length = 2, new array length = 3; the last
item doesn't show. If I reload my flash, its the only time that
this shows. Now if I get an item and lessen the inventory, it still
retains the original length and doubles (or triples, depending on
how many items i lessened) the last item.
var so:SharedObject = SharedObject.getLocal("lakbayUser",
var i:Number = so.data.currentUserIndex;
var ctr = 0;
var iconCtr;
var iconArray: Array; //temporary storage of items placed
inside icon
function selectIcon(num){
eval("iconMC"+num)._alpha = 0;
so.data.users
[15][0] = true;
so.data.users[15][1] = iconArray
//loads the next icon
function setNextIconMC(itemCtr, iconCtr){
if(iconCtr > 0) {
newName = "iconMC" + iconCtr;
newPos = 130 * iconCtr;
_root.itemaHolderMC.iconHolderMC.iconMC0.duplicateMovieClip(newName,iconCtr+1);//does
not duplcate if unloadMovie is called
this[newName]._x = newPos;
this["iconMC"+iconCtr].enabled = true;
this["iconMC"+iconCtr]._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC[newName]);
trace(_root.itemaHolderMC.iconHolderMC[newName]);
else {
iconMC0.enabled = true;
iconMC0._alpha = 100;
loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC.iconMC0);
//loads all the icons into the container
function loadImage(){
iconCtr=0;
iconArray = new Array();
for(itemCtr = 0; itemCtr < so.data.users
[14].length; itemCtr++){
if(so.data.users[14][itemCtr] == true){
iconArray[iconCtr] = itemCtr;
setNextIconMC(itemCtr,iconCtr);
iconCtr++;
if(iconCtr==0){
iconMC0._visible = false;
else iconMC0._visible = true;
loadImage();
so.flush();
stop();

hey there yenniie - each time you update the array you must
also call 'flush' to update the SharedObject. also please use the
'attach code' button to post code, as you can see what happened in
your post with the ' i ' value. So assuming I'm interpreting the
the missing characters correctly the method should be:

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

Problem with swatches palette in Indesign CS4

Hi all,
Mac G5 dual processor OS 10.4.
I've got a problem with my swatches palette in that the thumbnails that show stroke and fill are always blank, yet the palette still works OK.
I don't know when this started - I am using an old LCD monitor temporarily as mine died and I thought at first that I just couldn't see it properly but I'm not so sure now.
Any thoughts please?
Thanks

Fantastic Peter - thank you. I'm kind of annoyed with myself that I just didn't do this anyway as it's the first thing I tell others to do . . .
My innate laziness is at work again!
Mal

Problem with FLVPlayback and component

First of all I had problem with control component. they are not working so i just named that ppo and change the visibility to false to get rid of problem!
ppo.visible=false;
Question1
(is there anyway to solve the problem? I mean to match the controlbar with screen of FLVplayer.)
Question2
what is the difference btw Flvplayback and FLVplayback 2.5 ?
Question3
whenever I click in btn1 it plays the flv.but sometimes it has no action so i click again and suddenly it plays the 001.flv twice and simultanously(even more than twice!)
how can I solve my problem ?
___________________Frame 1______________
import fl.video.*;
import flash.events.MouseEvent;
var myVideo:FLVPlayback = new FLVPlayback();
control.visible=false;
myVideo.x = 115;
myVideo.y = -10;
myVideo.skinBackgroundColor = 0x333333;
myVideo.skinAutoHide=true;
myVideo.skinFadeTime=300;
addChild(myVideo);
btn1.addEventListener(MouseEvent.CLICK , c1);
function c1(e:MouseEvent):void
myVideo.source = '001.flv';
Question 4 : I want to jump to another frame and start another flv but I want to stop previous flv. and again add myVideo2 to stage like frame 1 pattern. Is it true ? is there any better way to do this ?
---------------------------frame5-----------------------
import fl.video.*;
import flash.events.MouseEvent;
var myVideo2:FLVPlayback = new FLVPlayback();
control2.visible=false;
myVideo2.x = 115;
myVideo2.y = -10;
myVideo2.skinBackgroundColor = 0x333333;
myVideo2.skinAutoHide=true;
myVideo2.skinFadeTime=300;
addChild(myVideo2);
btn2.addEventListener(MouseEvent.CLICK , c2);
function c2(e:MouseEvent):void
myVideo2.source = '002.flv';
thank you in advanced..

Question1
(is there anyway to solve the problem? I mean to match the controlbar with screen of FLVplayer.)
what are you calling the '..controlbar' and what are you calling the '...control component'?
Question2
what is the difference btw Flvplayback and FLVplayback 2.5 ?
2.5 has more features, http://blogs.adobe.com/ktowes/2009/05/announcing_dvrcast_and_flvplay.html
Question3
whenever I click in btn1 it plays the flv.but sometimes it has no action so i click again and suddenly it plays the 001.flv twice and simultanously(even more than twice!)
how can I solve my problem ?
remove the click listener so you can only click once. then you may need to wait if testing online.
___________________Frame 1______________
import fl.video.*;
import flash.events.MouseEvent;
var myVideo:FLVPlayback = new FLVPlayback();
control.visible=false;
myVideo.x = 115;
myVideo.y = -10;
myVideo.skinBackgroundColor = 0x333333;
myVideo.skinAutoHide=true;
myVideo.skinFadeTime=300;
addChild(myVideo);
btn1.addEventListener(MouseEvent.CLICK , c1);
function c1(e:MouseEvent):void
myVideo.source = '001.flv';
Question 4 : I want to jump to another frame and start another flv but I want to stop previous flv. and again add myVideo2 to stage like frame 1 pattern. Is it true ? is there any better way to do this ?
---------------------------frame5-----------------------
import fl.video.*;
import flash.events.MouseEvent;
myVideo.stop();
removeChild(myVideo);
myVideo=null;
var myVideo2:FLVPlayback = new FLVPlayback();
control2.visible=false;
myVideo2.x = 115;
myVideo2.y = -10;
myVideo2.skinBackgroundColor = 0x333333;
myVideo2.skinAutoHide=true;
myVideo2.skinFadeTime=300;
addChild(myVideo2);
btn2.addEventListener(MouseEvent.CLICK , c2);
function c2(e:MouseEvent):void
myVideo2.source = '002.flv';

Problem with showing a group of records in dynamic page (PLS-00428 error)

Hi
I have problems with viewing a group of records from db. I've created Page, which "Page Type" attribute is "PL/SQL". In "PL/SQL Code" field, I've written very simple SQL query: "SELECT * FROM PORTAL_DEMO.EMP ;"
I'd like to generate HTML table with it's result. Unfortunately, every time I get the same Exception:
Error 30584: DBMS_SQL has raised an unhandled exception. ORA-06550: line 1, column 7: PLS-00428: an INTO clause is expected in this SELECT statement
Is it necessary to write a COURSOR (and use HTP function) to realize this functionality? I succeed, trying this way - but it is very uncomfortable ( a lot of code ).
What I have done in wrong way?
Please help me.
Best regards
Mario

How do I handle this?

Problem with showing unit-label

Hi All,
i just have a problem with controls that have two displays (like
slider). I need the digital display with an unit-label. But when I
enable showing the label it appears two times and I have no chance to
disable one. Is there a methode that I can reach my target?
bye
Henrik

There is a way but it rather looks like a bug in LabVIEW...
The object must be a control and the VI must be in Run Mode or running:
Select the text in the unit label of the digital display and delete it.
It can generate insane object errors if you manipulate the object further,
thus it is safer just to hide the label.
Jean-Pierre Drolet
John Lum a écrit dans le message :
[email protected]..
> Henrik Skupin wrote:
>
> > i just have a problem with controls that have two displays (like
> > slider). I need the digital display with an unit-label. But when I
> > enable showing the label it appears two times and I have no chance to
> > disable one. Is there a methode that I can reach my target?
>
> Others may have a more
elegant way of getting around this, but one quick
> workaround is to edit the control to hide the unit label that you don't
> want to see.
>
> Let's say you want to hide the unit label next to the slider part of the
> control: simply select the control, do Edit >> Edit Control, move the
> offending unit label over top of the digital display, then select Move to
> Back from the Reorder menu.
>
> Regards,
> John Lum
> National Instruments
>

Problem with show data of system R/3

Hi all,
I have a proyect with web dynpro, and i like get data of system R/3. I get this data with the connection JCO.
I have make all steps for crate the web dynpro and i see the application when deploy and run, but data of system R/3 i not see.
I have created a connection with Jco in Web dynpro Administrator and the test is good.
How can i make for get the data in the table of webdynpro?
Thanks in advance.
Vicente Zaragoza.

Hi,
You mentioned that there is no problem with JCO connection, if it is so then you should check the mapping of attributes to to UI elements (Usually you will map Model(BAPI) to coustom controller and coustom controllet to View Check are you mapping attributes, then In view you should map UI elements to attriburtes(Value attributr/value node depending on the context).
And check in coustom controller's source code you are excuting a function module (Method to call function module /BAPI) and in WDINit method creat function module object similar to below mentioned code
Bapi_Persdata_Getdetailedlist_Input bapiInput = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(bapiInput);
in view invoke this method
for a specific tutorial follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq
How to access R/3 Backend in Web Dynpro?
Hope your problem solved
Regards,
RK

Problem with showing palette component which contains swing components

Similar Messages

Maybe you are looking for