Problem(!?) with SIP VIA Field

Hello,
i'm trying to create a OK message in my Class, which implements the javax.sip.SipListener.
In the sip header exists only one Via-Field with 2 via-entries one after the other, splitted with "," .
Wireshark shows this as follow:
Via: SIP/2.0/UDP SIPSRVIP;branch=...xyz, SIP/2.0/UDP CLIENTIP;rport=CLIENTPORT;branch=...zyx
In other messages the via-fields exist seperatly, also messages generated by x-lite are with 2 seperate via fields. I couldn't find any information in rfc, if that is right.
Is that also right ?
Has someone an idea ?
Regards,
Taner
Source code, how i create this Response:
public void processRequest(RequestEvent evt) {
        Request req = evt.getRequest();
        Response res = messageFactory.createResponse(200, req) ;
        evt.getServerTransaction().sendResponse(res);
}

Note: This thread was originally posted in the [Java Media Framework|http://forums.sun.com/forum.jspa?forumID=28] forum, but moved to this forum for closer topic alignment.

Similar Messages

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problems with sending via url

Hi there, I've got a problem with sending via an URL. If I send and receive something I use a method called connect. This method works well, I construct a URL, connect and receive an ObjectStream.
But as I only want to set some values in another use case I do not want to receive anything,
But it doesn't work - my servlet does not receive any request.
Could anyone please help me to solve this?
Thank you.
Regards
Tarik
private synchronized static void connectOneWay(String data)
            throws IOException, ClassNotFoundException {
        try {
            URLConnection connection = null;
            URL testServlet = null;
            Class classLock = ServletConnector.class;
            while (locked)
                classLock.wait();
            locked = true;
            testServlet = new URL(servletURL + data);
            if (MMSCMSTree.debug)
                System.out.println("Servlet URL: " + testServlet);
            connection = testServlet.openConnection();
            connection.setDoInput(false);
            connection.connect();
            locked = false;
            classLock.notify();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }

Hi
There was not a problem with this, the problem was on the server side, infinite loop ... :-)
Regards
Tarik

Problem with sip trunk between CCM and Huawei through Cisco ASA5520

Hello,
I have a next problem
During SIP conversation ASA is changing the ip address of CCM to corresponding name in ASA configuration inside the SIP packet:
To: <sip:443230282@Server_CCM1;user=phone>
ASA name configuration:
name x.y.z.h Server_CCM1
But it should be without any changes like that: To: <sip:[email protected];user=phone>. Because of that session cant be established. Remote SIP peer gives an error "Bad Request - 'Malformed/Missing URL"
When name was deleted in ASA "no name x.y.z.h Server_CCM1" we have no any problem with SIP initialization and call proccesing.
We are going to upgrade ASA from 8.2 to 8.3 and it seems that we will have the same problem because object will be created automaticly in new version (we are using a NAT) and we will not be able to delete an object like we did in version 8.2.
What configuration in ASA version 8.3 should be done to avoid this issue.
P.S Detailed debug from Huawei in attachment.
Thank you.

Hi.
depending on your config, you might be hitting CSCta16361, this is fixed in 8.2(4)
if you can confirm it's still happening in latest 8.2 release, then a TAC case needs to be opened so investigation is done and a new bug is opened.
if you've tested 8.2(4) already and it's still doing the same, then a TAC Service Request should be opened for more investigation and possibly opening a new defect.
Best regards,
Fadi.
does this answer your question? if yes please mark it resolved.

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with printing via HTC one

Good morning
I have a problem with my printer device (HP Photosmart 2575 All-in-One)
When i try to print out from my cell phone i recieved a message at the printer lcd display "operator involvement".
This happened after an upgrade to my mobile phone from sense5 to sense6. The type of my moblile is HTC One Mini.
Before this upgrade everything work correct.
can you help me with this?
best regards

Hello milosath,
Welcome to the HP Support Forums!
I would like to see if I can help out with the HTC printing issue. Ensure the printer is connected to the network via the Ethernet cable, download and install the HP ePrint App and try printing from there.
Getting Started with HP ePrint Mobile Apps<---
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Problem with long text field.

Hi all,
I have a problem when I try to concatenate two fields.
It seems the new field only is 254 characters long?
Here is my syntax:
data: w_long_text(1000).
clear w_long_text.
    loop at iline.
      concatenate w_long_text iline-tdline into w_long_text separated by space.
    endloop.
I'm sure the text is longer then 254 becuase I can see the text in an Activity in the Sap Crm system.
Best Regards
Frode

Hi thomas
wat i would suggest you is better take an internal table with long_text(255) field .
data : begin of it_text occurs 0,
            long_text(255),
          end of it_text.
clear : w_long_text,it_text.
loop at iline.
concatenate w_long_text iline-tdline into w_long_text separated by space.
<b>it_text-long_text = iline-tdline.</b>
append it_text.
clear it_text.
endloop.
and when displaying the text keep that in a loop and print it.
This way u can display the whole text irrespective of the char length.
Reward points if helpful
Regards
Zarina

Problem with select max(FIELD)

I have a table with the following fields:
PARTID     ART_TYP     AEC     SERVICE     PLANT     STATUS
4711     A     A     2     P     230
4711     A     B     0     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I need a sqlscript where I get the records with MAX(SERVICE)
In this example
4711     A     A     2     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I tried this with:
select distinct partid,
     art_typ,
     aec,
     max(service),
     plant,
     status
from t_msltmp
group by partid,art_typ,aec,plant,status
But I get both records of partid=4711
Can someone help me with this problem
kind regards
Menk Slot

ROW_NUMBER() requires explicit ORDER BY clause in OVER:
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions105a.htm#86312
SQL> select partid, art_typ, aec, mx, plant, status
2 from(select partid,
3                art_typ,
4                aec,
5                max(service) over (partition by partid) mx,
6                row_number() over (partition by partid order by service desc) rn
7                plant,
8                status
9         from t_t)
10 where rn = 1
11 /
    PARTID A A         MX P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Rgds.
P.S.
Another way to get this (more tedoius):
SQL> select partid,
2 max(art_typ) keep (dense_rank first order by service desc) art_typ,
3 max(aec) keep (dense_rank first order by service desc) aec,
4 max(service) service,
5 max(plant) keep (dense_rank first order by service desc) plant,
6 max(status) keep (dense_rank first order by service desc) status
7 from t_t
8 group by partid
9 /
    PARTID A A    SERVICE P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Message was edited by:
dnikiforov

Problem with SAPbouiCOM.EditText field

Hey Everyone,
I am experiencing a problem with an edit text box on a form that I created. For some reason when I go into the add mode on the form and type into the field the text disappears as soon as I go to another one of the controls on the form.
If i leave the cursor in that text box the text stays. Has anyone experienced this problem before?
Thanks in advance.

Laura,
I had this problem and the reason was about the datasource.
If you item is linked to a UserDataSource, there is no problem.
If you item is linked to a dbdatasource, you have to ensure the datasource contains at least one record.
Can you show us the part of xml file, or VB code that you use to create your item on you form.
the event that you can catch would be et_validate. But I think it's fired when your text box is linked to datasource
HTH
Sebastien

Question of possible problem with "display as" field in MS Outlook contact

Are you aware of any problems with an apparent shift of the display as field in MS Outlook contacts after the initial syncing with their iPhone? When preparing to send an e-mail in Outlook, the auto populating of the "display as" field is now linked to incorrect contacts. Therefore, one could unknowingly send an e-mail to the wrong recipient. After seeing this error, it appears that many of my "display as" fields have shifted among contacts within my Outlook contacts. This appears to have happened right around the first time I synced my iPhone. It could be completely unrelated to the iPhone syncing but I am curious if other iPhone / MS Outlook users have experienced similar problems.

There should be no leeway or movement. Return the phone to where you bought it and show them. It should be covered under warranty unless they determine it was dropped or accidental damage.

Problem(!?) with SIP VIA Field

Similar Messages

Maybe you are looking for