Problem with siptrink, call only one direction

i need help, i created a sip trunk with other sip server, but the cme give this error:
070846: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 54.207.30.33:5080;rport;branch=z9hG4bKD7U28atZZ6r7B
Max-Forwards: 69
From: "Extension 1000" <sip:[email protected]>;tag=Br453j6KcmKFN
To: <sip:[email protected]>
Call-ID: ef0174b1-5735-1233-6ebd-02585e7b1bc5
CSeq: 73838188 INVITE
Contact: <sip:[email protected]:5080;transport=udp;gw=aerosan>
User-Agent: FreeSWITCH-mod_sofia/1.4.18+git~20150312T185523Z~4eed221b69~64bit
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY
Supported: timer, path, replaces
Allow-Events: talk, hold, conference, refer
Content-Type: application/sdp
Content-Disposition: session
Content-Length: 223
X-FS-Support: update_display,send_info
Remote-Party-ID: "Extension 1000" <sip:[email protected]>;party=calling;screen=yes;privacy=off
v=0
o=FreeSWITCH 1428321972 1428321973 IN IP4 54.207.30.33
s=FreeSWITCH
c=IN IP4 54.207.30.33
t=0 0
m=audio 26532 RTP/AVP 0 101 13
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
070847: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 488 Not Acceptable Media
Via: SIP/2.0/UDP 54.207.30.33:5080;rport;branch=z9hG4bKD7U28atZZ6r7B
From: "Extension 1000" <sip:[email protected]>;tag=Br453j6KcmKFN
To: <sip:[email protected]>;tag=3888E968-22ED
Date: Mon, 06 Apr 2015 19:23:05 GMT
Call-ID: ef0174b1-5735-1233-6ebd-02585e7b1bc5
CSeq: 73838188 INVITE
Allow-Events: telephone-event
Warning: 304 200.111.156.150 "Media Type(s) Unavailable"
Reason: Q.850;cause=65
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
the sip trunk configuration:
dial-peer voice 3611 voip
permission orig
description aws
huntstop
preference 1
destination-pattern 100.
session protocol sipv2
session target ipv4:54.207.30.33:5080
incoming called-number 1000
voice-class codec 2
no vad
the voice configuration:
voice service voip
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
supplementary-service h450.12
sip
voice class codec 2
codec preference 1 g711ulaw
voice class codec 1
codec preference 1 g711ulaw
please help me

On the second question...
If the videos are multiplexed MPEG files then the audio and the video are muxed onto the same track. QuickTime, and therefore any application that uses QT like iTunes, the iPod, iMovie (Mac app), etc. expect two separate tracks, one video and one audio. So when you play these muxed files, the video is played and the audio is not heard.
So you need to do a conversion on the file first. MPEG Streamclip is a popular one that comes in both Mac and Windows versions and is known to "repair" this problem.
See this other link for other applications that might be able to do the same thing. But your root cause is the muxed MPEG files.
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

Similar Messages

Problem with videos and only one album playback

Hey everyone.
I'm having two problems.First off,there's one album on my iPod that plays weird.It sounds like it's skipping,but not like what I'm seeing a lot of you having problems with when it goes to the next song instead of finishing the current one.Mine sounds like a CD skipping,only it's constant and all throughout the song and sounds horrible,it ruins the song.It only does it with one album though,and it's my favorite album by my favorite band,so I'm kinda bummed.I initially had three songs on this album that I brought over from Windows Media Player after uploading it onto the from my CD about two years before I got the iPod.I later added a few more and they do the same thing.I'm wondering if it's a problem with the licensing,since it's only this album,because that's the same way I got most of my other songs and they're fine.I tried deleting them and re-uploading them from the CD,but that didn't help.Tried converting the file to AAC;that didn't help either.I'm utterly befuddled.
The second question is that I've got two videos I downloaded from Limewire that I converted to iPod format and everything you're supposed to do,but I can only get the video and not the audio.My video podcasts work fine,it's just these two I'm having a problem with.Any help would be greatly appreciated.

On the second question...
If the videos are multiplexed MPEG files then the audio and the video are muxed onto the same track. QuickTime, and therefore any application that uses QT like iTunes, the iPod, iMovie (Mac app), etc. expect two separate tracks, one video and one audio. So when you play these muxed files, the video is played and the audio is not heard.
So you need to do a conversion on the file first. MPEG Streamclip is a popular one that comes in both Mac and Windows versions and is known to "repair" this problem.
See this other link for other applications that might be able to do the same thing. But your root cause is the muxed MPEG files.
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

SEM-CPM Cockpit problem with tachomter chart: only one pointer shown

Hello
I'm using the CPM - cockpit design transaction , UMC_CPM_MEAS, to configure a cockpit frame with a TACHOMETER graph. When I use just one data series and compare current period vs previous period for example, I get a correct graph presentation with the two pointers, but, when I use two data series in order to compare them (for example real vs plan) I'm not able to fill the second pointer measure in the graphic design window and obviously the graph shows just one pointer.
Please, help me in customizing the graph correctly.
Thanks in advance

Hi Ludek,
That is exactly what I was doing, but, the problem is that I can't assign a keyfigure to the sencond pointer in the Graphic Design step. Although, in Graphic Assigment tab I fill information for the second pointer, it is lost and never remains in the definition and of course it doesn't appears at graphic presentation.
As Kai suggest, there is a way to set Use Categories and Data Index, but, where can I do that?, following the step by step procedure to configure the cockpit frame, there is no a step to set up those properties.
Thank you

HT4060 iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.

iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.

I'm sorry but this is too funny to pass up.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Printing invoices with VF31 in only one spool request

Hello,
we want to print a number of invoices with VF31 using only one spool request, as at this time we become one spool request for each document.
The problem is that VF31 calls indirectly RSNAST00 and this program makes a call to the print program where we have OPEN_FORM and END_FORM each time, so this creates one spool request every time the program is called.
Is there a way to print in only one spool request without doing big changes to programs?
Thanks and regards.

Hi,
To append to an existing spool, see the SAP Notes 85318 and 16410.
For spools to be appended the parameters 'New spool request' and 'Do not Append Print Jobs' must be set to 'No' by the application creating the spools.
For Sapscript, when the application call the function module OPEN_FORM in your print program, you can transfer a structure ITCPO to the parameter OPTIONS. Via ITCPO-TDNEWID, you can select the option 'New Spool Request'.Via ITCPO-TDFINAL, you can can select if the spool is closed.
Regards,
Aidan

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with opening more then one file in Adobe Acrobat X Pro - nvd3dum.dll

Hello,
I have Adobe Arobat X Pro version: 10.0.1.434. Everything works great up to now. Last time I done upgrade my system to windows 7 64bit with SP1. When I open pdf file in adobe acrobat everything works great, but when I open second file, I receive this problem that Adobe acrobat stopped working and I receive this error : nvd3dum.dll. I have red somewhere that it will be due to driver to graphic card or DirectX. I upgraded them to a new but nothing, problem still remained.
Here is problem details:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: Acrobat.exe
Wersja aplikacji: 10.0.1.434
Sygnatura czasowa aplikacji: 4d457194
Nazwa modułu z błędem: nvd3dum.dll
Wersja modułu z błędem: 8.17.12.6658
Sygnatura czasowa modułu z błędem: 4d27c323
Kod wyjątku: c0000005
Przesunięcie wyjątku: 003814fb
Anybody tell me what must I do to disolve problem to open not only one but two, three .... and so on. Has anyone noticed the same problem at home?
Thank all for advice
marbross77

Hello Dave
the Problem affects all Uniplot 3d Files. I start with an Excel or .txt file with 3 columns and uniplot creates an engine diagram similar to this one: http://www.uniplot.de/documents/de/_images/Uni_BSP7-2.png
Uniplot can Export this as a .u3d but it can not be opened with Adobe. Then I tried to open the .txt.file with MeshLab. I can see the correct Points (which Uniplot uses to create the engine diagram) but of course they are not connected. If i Export those Points in MeshLab as a .u3d file, Adobe can not work with it.
I do not know how to deal with this Problem. Do you have any suggestions?
Thanks in advance for your help

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problem with Assigning more than one value to GROUP dynamically

Hi,
I have a problem with assigning more than one value to GROUP varible dynamically.
I am able to assign only one value dynamically through Initialization block
I have even tried with the ROW-WISE initialization blocks..
using this query..
SELECT 'GROUP', G.GROUP_NAME
FROM GROUP_MAP G
WHERE G.USER_NAME = ':USER'
if GROUP_1, GROUP_2 are two groups to be associated,
through this, i'm getting " GROUP_1;GROUP_2 " into GROUP variable ( seen from Narative view )
And the properties and securities of this Groups are not inherited.
Please let me know if there is any other way to Populate the GROUP variable dynamically with more than one value.
Thank you.,

Hi,
i finally got in this way..
i had created a function which takes USER_NAME as input and returns a string that contains the GROUP names with semicolon delimeted..
Though it is same as that of ROW-WISE initialization,
the properties of those groups are also being inherited..
Now, i can assign more than one groups and its properties to a user dynamically.

How to set a keyframe with setValueAtTime for only one axis?

Hi,
I´d like to set a keyframe for the layer´s scale, anchor point values but separately. Let´s say I want to add the following keyframes to a layer:
time: 0, value: 100, axis: X
time: 0.3, value: 10, axis: Y
time: 1, value: 110, axis: X
If I use setValueAtTime(time ,[x, y]) it always places a keyframe for both axis.
How can I set a keyframe with setValueAtTime for only one axis?
Regards,
Thomas

Dan, thanks for your fast reply. But the problem is a bit difficult to describe for a german like me
I´m try to convert given keyframes from another application. Let me visually show how it handles keyframes that are set on different axis at different times:
X: O---O---O
Y: ---O--O-O
You see when the user sets a keyframe and both axis were modified, both have a keyframe (see the last key). But if only one axis is transformed and the other not, there is only one keyframe. The problem that I try to solve is that AE is only able to set a keyframe for both axis at a given time. So if I set the 3 keyframes of the X axis first, the AE script will set keys on the Y axis simultaneously. That´s bad because it adds keyframe to the other axis where there is no value "cache". So if I would set all keyframes it would look like this:
X: O--•O-•-O
Y: •--O•-O-O
The small dots indicate those "forced" in-between keys.
So is there a "native" scripting way to separate the dimensions (like the position prop) for other props and add independent keyframes?

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

BMP EJB Load and Store is calling only one time calling in a loop

Loop Iterating two times but ejb load and store is calling only one time.
Application deployed in 0c4j 10.1.2.0.0 container.

This sounds more like a Teststand quesstion. You might want to post it there.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Create user with select privilege only one schema

can someone tell me how i can create user with select priviliges only one schema.
i don't want the user to have any select privileges with other schema.
can someone advise me.
Thansk

In general, you would do something like
CREATE ROLE abc_read_only;
FOR x IN (SELECT * FROM dba_tables WHERE owner='ABC')
LOOP
EXECUTE IMMEDIATE 'GRANT SELECT ON abc.' || x.table_name || ' TO abc_read_only';
END LOOP;
CREATE USER your_user ...;
GRANT abc_read_only TO your_userYou create a role, grant the role SELECT access to all the tables in the ABC schema (you can extend this to grant access to views, functions, etc depending on the requirements), and then grant that role to your user.
Justin

Problem with siptrink, call only one direction

Similar Messages

Maybe you are looking for