Problem with siteminder in struts application

In our application we are using the siteminder for the authentication of the users. Whenever the user is authenticated by the siteminder the user is being taken to the application welcome page.Then user performs his own activities and after that whenever he is logging out, i am taking him to the logout page and before that i am clearing all the sessions using the session.invalidate and also setting the session = null. I porvide a link the logout page where the user can click to relogin to the application. So whenever the user clicks on it he should be prompted with the siteminder login screen, instead it is directly taking me to the application. So i dont know wht to do. But if i close the window and open the new window i am getting that login prompt.But when the users types the same URL in the same page he is taken into the application without login screen
Please help me with this issue

It seems you are doing right thing. But what could possible is , on Siteminder Policy Server, there is Parameter called ACO that will have a definition for Logging off url . Its LogoffURI parameter. Unless it is set , though you clean up the session in browser when user click on logoff url, the session is still available on siteminder policy server cache. Thats why when user access the application url within the same browser window he is getting application pages. So check with siteminder administrator on your end...

Similar Messages

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with installFolder in air application

hi! happy new year !!! enjoy for 2011!!!
so i have 1 little problem with <installFolder>
i need to install my app in documents directory...
is possible?
i put my path: <installFolder> C:/Documents and Settings/Utente/Documenti\</installFolder>
but nothing . . . why??
help.....

It seems you are doing right thing. But what could possible is , on Siteminder Policy Server, there is Parameter called ACO that will have a definition for Logging off url . Its LogoffURI parameter. Unless it is set , though you clean up the session in browser when user click on logoff url, the session is still available on siteminder policy server cache. Thats why when user access the application url within the same browser window he is getting application pages. So check with siteminder administrator on your end...

Problem with Validation in Struts

Dear All,
I am facing a proble with validation in struts.
I have got this code in my action class
//Initial Code...
ArrayList branches=new ArrayList();
branches.add("B01", "Main Branch");
branches.add("B02", "Second Branch");
branches.add("B03", "Third Branch");
DynaValidatorForm memberForm=(DynaValidatorForm)form;
memberForm.set(branches);
//Finalizing code.....This form is getting validated in validation.xml.
This action is being forwarded to folllowing JSP.
//Initial Code...
        <tr>
            <td align="right"><strong>Branch Name </strong></td>
            <td> </td>
            <td align="left">
                <html:select property="branid">
                    <html:optionsCollection name="memberForm" property="branches" value="key" label="value"/>
                </html:select>
            </td>
        </tr>
//Later code...I have action mapping as..
        <action path="/member/save" input="member.page" name="memberForm" validate="true"
        scope="request" type="com.mlm.action.MemberAction" parameter="action">
            <forward name="success" path="/show.do?action=member" redirect="true"/>
        </action>Now, the problem is that when the form doesn't pass the validation then it gives an exception that..
Can't find collection 'branches' in bean

sauanu wrote:
Ok, now I am giving full code of my module...
Form-bean
<form-beans>
<form-bean name="memberForm" type="org.apache.struts.validator.DynaValidatorForm">
<form-property name="id" type="java.lang.String"/>
<form-property name="membname" type="java.lang.String"/>
<form-property name="address" type="java.lang.String"/>
<form-property name="branid" type="java.lang.String"/>
<form-property name="branches" type="java.util.ArrayList"/>
</form-bean>
</form-beans>Validation is being done for all fileds except "branches". Validation type is "requried"
My Jsp....
<html:form action="/member/save?action=save">
<html:hidden property="id"/>
<tr>
<td align="right"><strong>Member Name </strong></td>
<td> </td>
<td align="left">
<html:text property="membname"/>
</td>
</tr>
<tr>
<td align="right"><strong>Address</strong></td>
<td> </td>
<td align="left">
<html:text property="address"/>
</td>
</tr>
<tr>
<td align="right"><strong>Branch Name </strong></td>
<td> </td>
<td align="left">
<html:select property="branid">
<html:optionsCollection name="memberForm" property="branches" />
</html:select>
</td>
</tr>
<tr>
<td align="right">
<html:submit/>
</td>
<b><td>   </td></b>
<td>
<html:button value="Cancel" onclick="javascript:history.go(-1)" property="cancel"/>
</td>
</tr>
</html:form>This is the code..
I tried to find out the problem and I found that.. when the form does not pass the validation its input page gets displayed..
Now, when the input is getting displayed.. "branches" field of the form contains null???Why?
Edited by: sauanu on ?? ??????, ???? ??:?? ?????????Forget,about Validations.
Who is forwarding the control to this JSP page or view ??
Is it Action method code which metioned earlier doing it ??
Or some other Action is involved if it is some other action please intialize Values of branches component in the respective action.
Also,
Also,
ArrayList branches=new ArrayList();
branches.add("B01", "Main Branch");
branches.add("B02", "Second Branch");
branches.add("B03", "Third Branch"); I believe you need to get a good understanding of Java Collection classes aswell.
You can add things as entities in the above case lets create a simple java bean named Option.
public class Option implements Serializable{
    private String label;
    private String value;
    public void setValue(String value){this.value = value;};
    public String getValue(){return this.value;}
    public void setLabel(String label){this.label = label;}
    public String getLabel(){return this.label;}
} and inside the action which is forwarding to the respective view
ArrayList branches=new ArrayList();
Option option = new Option();
option.setValue("B01");
option.setLabel("Main Branch");
branches.add(option);
option = new Option();
option.setValue("B02");
option.setLabel("Second Branch");
branches.add(option);
option = new Option();
option.setValue("B03");
option.setLabel("Third Branch");
branches.add(option);
      <html:select property="branid">
               <html:options name="memberForm" collection="branches"   value="value" label="label" />
       </html:select>and one more thing is is that after the validation if it is not validated it'd be sent back to input page which destorys the request therefore try making scope of "memberForm" to session in your action mappings and check.
Hope this might help :)
REGARDS,
RaHuL

Problem with ClassCastException in web application

Hello,
          I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          "dreaded" ClassCastException every time when JSP tries to read a bean
          from the request or session. Under my architecture (actually it's just
          the regular "model 2" ) bean is populated by a servlet, set on the
          request and then retrieved by JSP (servlet forwards to JSP). Everything
          work fine when I register servlets in weblogic.properties, but
          ClassCastException is thrown on any attempt to read from the request if
          the same JSPs and servlets are deployed as web application.
          Has anybody come across the same problem?
          Thanks in advance for help.
          Alexander


Hello,
          This is all well and good as a temporary bug, but it's totally unrealistic for
          the future. Two points:
          * The ClassLoader doesn't need to be discarded, it just needs to be cleared.
          * Other servlet engines seem to be able to handle this.
          Hope it's on its way to resolution!
          TDoan wrote:
          > Alexander:
          >
          > I had some problem with ClassCastException, and recently I found out what it
          > was that causing it. I'm sure if this is the same problem you are having,
          > but please read the following paragraph.
          >
          > I cutted this from http://www.weblogic.com/docs51/classdocs/API_servlet.html
          > ClassCastException and HTTP Sessions
          >
          > You might encounter a ClassCastException while developing servlets that use
          > HTTP sessions. This could happen as a result of the following set of events:
          >
          > a.. You store a reference to a custom class, myFoo, in an HTTP session.
          >
          > b.. While in mid-session, you change your servlet (or JSP or JHTML),
          > causing it to be reloaded. In fact, it is necessary for it to be reloaded by
          > a completely new class loader, and the old class loader that had previously
          > loaded it must be discarded.
          >
          > c.. Because your custom class myFoo is also located under the servlet
          > classpath, it too is reloaded by the new class loader.
          >
          > d.. Now, when you retrieve myFoo from the HTTP session, you cast it to the
          > expected type, but you recieve a ClassCastException. The exception is thrown
          > even if class myFoo has not changed. Because it has been loaded by a
          > different class loader, it is regarded by the JVM as incompatible.
          > Note: If you are using session persistence, the class contents must be
          > serialized, and you will not encounter this exception.
          >
          > Here are some suggested work-arounds to this problem:
          >
          > a.. Do not place your class myFoo in the servlet classpath. Instead, place
          > it in the system classpath or the weblogic.class.path, which are accessible
          > by WebLogic Server. The class will not be reloaded when the servlet is
          > modified. This drawback to this solution is that you cannot prototype the
          > myFoo class, because you must restart the server in order to reload the
          > class after it is modified.
          >
          > b.. If you need to prototype the class, you can write a wrapper method
          > within it to store and retrieve its contents to and from the session. You do
          > not access the class directly from the session, but instead call it is
          > wrapper methods to store or populate it is contents from the session. As
          > long as you use standard Java class types to store the class contents, they
          > will not be reloaded when the servlet is reloaded. This approach has
          > performance drawbacks because your wrapper methods would need to set or get
          > multiple name=value pairs for each class's attributes.
          >
          > c.. Another work-around is to catch the ClassCastException, and replace
          > the old class that is stored in the session with a newly instantiated class,
          > or remove it from the session. Unfortunately, you lose the session data that
          > was previously stored in the class, so you must write your application to
          > handle this scenario. This is the easiest solution to the problem-remember
          > that you should not be storing critical information in an HTTP session, but
          > rather storing it in a database.
          > Note: The ClassCastException generally occurs while you are developing
          > your servlets, and should not be an issue in a stable production system. If
          > you are upgrading your system online, you might wish to warn your customer
          > base.
          >
          > Hope it helps,
          > Tin
          >
          > "Alexander Ananiev" <[email protected]> wrote in message
          > news:[email protected]...
          > > Hello,
          > >
          > > I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          > > "dreaded" ClassCastException every time when JSP tries to read a bean
          > > from the request or session. Under my architecture (actually it's just
          > > the regular "model 2" ) bean is populated by a servlet, set on the
          > > request and then retrieved by JSP (servlet forwards to JSP). Everything
          > > work fine when I register servlets in weblogic.properties, but
          > > ClassCastException is thrown on any attempt to read from the request if
          > > the same JSPs and servlets are deployed as web application.
          > > Has anybody come across the same problem?
          > >
          > > Thanks in advance for help.
          > > Alexander
          > >

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Problem with icons in the application bar (Photoshop CS4)

My computer's OS is WinXP Pro SP3.
I just now noticed a problem with all icons in the application bar in PS CS4 (v. 11.0.1).
When I bring mouse over icons (except for zoom level icon), all icons turn into blank (white) boxes.
For "Arrange Documents" bar, when I click on its blank icon, the top two columns are empty but show the the rest of three columns.
Please advise me how to fix this problem. I hope to avoid uninstalling -reinstallinlg. Thanks.

ATI no longer supports your card so I don't think you will see any updated drivers from them to correct your problem. You might want to look into investing in a newer card.
http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_xp.aspx?type=2.4.1&pr oduct=2.4.1.3.23&lang=English

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

Problem with firefox and gtk applications in KDE!

Hi there, i have my arch installed and it's great, i use kdemod that is quite perfect but i have a problem: all the gtk applications like firefox, eclipse, emesene and so on are terrible looking expecially the fonts. Here what I've done:
1) installed kdemod-gtk-qt-engine and configured to use qt theme and it's better
2) enabled fonts with antialiasing and hinting
3) installed fonts for lcd like cairo-lcd
4) installed microsoft fonts
But stille it's ugly and it's impossible to use the apps, here's a screenshot:
The point is that i can't use konqueror because i need some plugins like googlebrowsersync that doesn't exist for konqueror. And in other distros like n00buntu it works.
Thanks for your help!

pelle.k wrote:
I can relate to what borzo is saying, because i have exactly the same problem.
See, i have installed libxft-lcd and enabled antialiasing and sub-pixel hinting in kde font properties. All kde fonts look great. Now, i usually the exactly the same in gnome "Appearance" font settings (when i use gnome).
The thing is when you have KDE installed you can't set antialiasing and sub-pixel hinting for *GTK* apps, even if you can set a theme and font size with gtk-chtheme/.gtkrc
This has nothing to do with how firefox renders fonts, really, but how GTK fonts a drawn in KDE since gnome-settings-manager isn't running, and thus GTK apps get crappy fonts (including firefox html rendering).
So, how can i enable antialiasing and sub-pixel rendering specifically for GTK apps in KDE without running gnome-settings-manager?
I know this is an old thread, but I'm still having exactly the same problem. I've been fiddling with fonts for a whole week now. Fonts in KDE apps look great, but crappy in GTK-apps like Thunderbird and Firefox. Like Pelle asked: how can I set aintialiasing and sub-pixel redndering for GTK apps? When running Gnome the fonts in GTK-apps look so much better. I wanna use my shiny new KDE 4 desktop, though.

Problem with drag and drop application windows from one workspace to another

I work with multiple desktops (Spaces) and before I freely dragged the mouse a window from one space to another, now the mouse rests on the edge of space and the application does not become the next space. What am I doing wrong or where this option is set?

After the publication of the problem has disappeared, the window is dragged. Miracle! )

I am having many problems with the CC 2014 application manager update

I have 2 seats. Thus I have CC 2014 installed on four computers. All four are high end desktops with Windows 7 Ultimate 64 bit installed, all four with the latest patches. All four also use high end nvidia graphics cards all with the latest drivers.
On all four, when I tried to update the application manager, only the frame of update the window was visible. Then, when I moused over the empty frame, the blue update button became visible, but nothing else. Since the common thread is nvidia drivers, it seems there may be a conflict. But one card is a Quadro FX 5800, another is 2x SLI NVIDIA GeForce GTX 285, another is an NVIDIA GeForce GTX 680 2GB, and the fourth is an NVIDIA GeForce GTX 780 3Gb. So all four have different cards.
I went ahead and installed the app mgr update and all the program updates on all four computers. All four had problems, two of them serious.
On one computer, there were problems booting up. The boot up problems went away when I restored to a prior image. I tried several times. The problem persisted. I finally gave up on updating this computer.
This boot up problem then happened on a second computer. I restored to a prior image and the problem went away here as well. I then tried the installs again. This time, the computer booted fine, but I lost the ability to send email. I use Thunderbird and have had no problems sending email ever (for at least the past 8 years). So I again restored to a prior image and the email problem went away. I then tried the installs a third time. Same result. Investigating, I was able to get an alternate outgoing mail server to work (that of my company site). But I never got the Verizon server to work. Incoming? Yes. But no outgoing.
On the third computer, I also had problems booting. But rebooting many times seems to have solved the problem. Unfortunately, Premiere crashes so often I've reverted to CC.
I realize that Adobe puts much work into making their software better. And I depend on it every day. But to be honest, I've just spent several whole days trying to fix broken computers. And my confidence in Adobe is at an all time low.
I so regret not staying with CC.

>regret not staying with CC
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

Problem with siteminder in struts application

Similar Messages

Maybe you are looking for