Problem with Skype calls

Since I downloaded iOS 6 when I make Skpye calls I can hear the other person but they cannot hear me..I had no problem before the download

Delete Skype and install again.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Similar Messages

Problem with Skype calls on Android 5.0.2 (Nexus 7...

I have a problem when i'm talking on skype. After few minutes of talking, the other person cannot hear me. Uninstalling and upgrading Android to 5.0.2 didn't solve the problem.

I have the account name and passaord is 100%correct. But not sign in the result came unable to sign in. What can I do? Pls help me. I have the subscription but I cannot used. But I Can manage the account. Already uninstall skype apps and reinstalled to check same problems. Because only one or 2 weeks only same problems.pls you help me

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

Is there a problem with skype at the moment?

Hello folks.
I'm running a G4 and 10.411 using an old version of skype with a software patch that I found in one of the skype topics on this site. It has been working fine for months now. I don't use video just audio. I have a subscription to call land lines. The problem I am having is that I can call out and hear the person I am calling, but they can't hear me. Is there a problem with skype today? Or have they made changes as of today that do not permit people to use the patch and an old version of skype? Any information would be much appreciated.
Solved!
Go to Solution.

The problem has seemed to have gone away. The problem started yesterday on two different computers. Today, on one of the computers I ran a utility called Mcjanitor that I had installed years ago but very rarely ran it. I neglected to try skype prior to running the utility. On computer #2 I tried booting from an old utility disk called techtoolpro. I was unable to boot from the disk after several attempts and restarts. Both computers are running better and skype now works again on both. I sent an email earlier today to a tech support guy from my ISP about my recent problems with skype. In conclusion I can't explain why skype now works on both computers. I can only guess that I reset something when I used (attempted to use) a utility disk. The other possibility is that my ISP guy did something on his end. Or, lastly, that skype had problems that were remedied by skype today.

Problem with voice calls

I tried to make a voice call to someone on skype, and though I could hear her, she could not hear me. I tried restarting the app, restarting my iPod, turning off permission for access to my mic then turning it back on. Nothing. At first I thought it was a problem with skype, so I decided to try ooVoo. We ended up having the same exact issue. I tried the same solutions I attempted with skype, and still it wouldn't work. She could hear me typing on my computer keyboard, but she never did hear my voice. My headphones were not plugged in, and neither was my iPod speaker. I made sure the calls were not on mute. They weren't. If it's doing this with two apps, then it obviously is not them. Is there something else I can do?

You said " She could hear me typing on my computer keyboard, but she never did hear my voice.". Does this mean while yo were using Skype on your iPod the other persons could her your keyboard clicks on the computer but not your voice?
Are you holding the iPod?
The mic hole on iPods with a back camera is on the back
Does the voice recorder app work OK?

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7

As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug.

I have problems with skype

I have problems with skype I can not get to the phone on a stationary Russia. why?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what problems with iPhoto are you having? Describe in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

Problem with skype sound on headset

Hi. I have a problem with skype sound on my headset, when im talking to my friend I can hear him on my headset while the rest of the sound is on my speakers. How do i change that so i could hear all sounds on my headset?
Solved!
Go to Solution.

Hi rajababu3455, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
This will help us investigate and solve the problem you are experiencing.
Thank you

Problem with 5800, call processing is too slow.

i have a problem with rejecting calls and recieving as well as dialling. it takes to much time to process. when a caller calls me they hear the dial tone for about 5 seconds then i get the call on my phone.. when i use third party software for automatic rejecting calls, the caller hears the dialtone for like 10 seconds or more then it gets rejected which is really annoying. please help me. is there a solution for this? this is not the network problem coz my sim n rejecting calls on other phones work fine. AND ALSO wen someone calls me i get the call alert like after 10 seconds, its very slow!!

Make sure you have upgraded to 1.1.1 which fixes volume problems.
Note that it will NEVER be as loud as standard cell phones but it should improve the volume so you have no problem hearing it in the car.

Setting always changes by itself in my iPhone 5s, also every few calls I have to face a problem with a call without sound

Setting always changes by itself in my iPhone 5s, also every few calls I have to face a problem with a call without sound, battery becomes empty quickly

User troubleshooting steps as outlined in the manual are reset, restore, restore as new. Have you tried any of these?

Continual Problems with Skype-to-Skype calls TO Sw...

Let's see if the Skype Customer Service will respond to this inquiry in a manner which indicates that they have completely read and understood the situation which I am about to explain.
Over the past 8 years, I have been regularly using Skype to call family in Switzerland. That's Skype-to-Skype, not Skype-to-phone. I have either used a modern Macintosh (OS 10.6.8, using Skype 6.15) or most recently an iPhone5 (OS 8.1.3) and the downloaded Skype App. The person with whom I have been speaking in Switzerland has been using either a modern Windows PC or iPhone5.
Each time, I can't call them, and the person over there must first call me.
Each time, I can transmit a live picture to them, but I can not receive their picture.
Oh, yes, I just tried to message Skype Customer Service about this issue, and received the following message: “500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed.”

Customer service has received your request and working on it.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Problem with Skype and Wireless Networks

I have been having a problem with Airport for about 10 months. Long winded explanation follows.
Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

Hi there
Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
64 bytes from 10.10.10.1: icmp_seq
and so on.
After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

Problem with Skype calls

Similar Messages

Maybe you are looking for