Problem with Skype Number

Is there any people in skype to help out this issue, give some response please its very important, i gave all my coleogues my skype number so i cant able to contact them..i wish you will sort out this problem as soon as possible...
thank you
Subject/title amended from "fault," for clarity.
thasriq

Hi, Thasriq, and welcome to the Community,
Please check the information presented in this FAQ article to see if this does not resolve problems with your SKype Number not receiving calls:
https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number
If these steps do not work, please contact Skype Customer Service directly for further assistance in testing the number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7

As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug.

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Cannot contact the Adobe Service, I have a problem with the number.

Hi,
I would like to have more information in regard of the Adobe DC. My intent is to buy the product and use it in my office, we are a small company (4 PC).
If I'm not wrong I should take the Standard Plan for Business, but I cannot arrange any payment request for information because I have a problem with the number I am supposed to call.
Is there any other way to know if this software suit fine for me and my company, and most of all how much it will cost.
Thank you for your consideration.
Have a nice day!
I look forward to hearing from you.
Best,
Augusto

Hi Avgvstvs67,
Please refer this link : https://acrobat.adobe.com/in/en/pricing/business-pricing.html
Regards,
Rahul

I have problems with skype

I have problems with skype I can not get to the phone on a stationary Russia. why?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what problems with iPhoto are you having? Describe in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Is there a problem with skype at the moment?

Hello folks.
I'm running a G4 and 10.411 using an old version of skype with a software patch that I found in one of the skype topics on this site. It has been working fine for months now. I don't use video just audio. I have a subscription to call land lines. The problem I am having is that I can call out and hear the person I am calling, but they can't hear me. Is there a problem with skype today? Or have they made changes as of today that do not permit people to use the patch and an old version of skype? Any information would be much appreciated.
Solved!
Go to Solution.

The problem has seemed to have gone away. The problem started yesterday on two different computers. Today, on one of the computers I ran a utility called Mcjanitor that I had installed years ago but very rarely ran it. I neglected to try skype prior to running the utility. On computer #2 I tried booting from an old utility disk called techtoolpro. I was unable to boot from the disk after several attempts and restarts. Both computers are running better and skype now works again on both. I sent an email earlier today to a tech support guy from my ISP about my recent problems with skype. In conclusion I can't explain why skype now works on both computers. I can only guess that I reset something when I used (attempted to use) a utility disk. The other possibility is that my ISP guy did something on his end. Or, lastly, that skype had problems that were remedied by skype today.

Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

Problem with skype sound on headset

Hi. I have a problem with skype sound on my headset, when im talking to my friend I can hear him on my headset while the rest of the sound is on my speakers. How do i change that so i could hear all sounds on my headset?
Solved!
Go to Solution.

Hi rajababu3455, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
This will help us investigate and solve the problem you are experiencing.
Thank you

Problem with user number

Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right, appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
Waiting for an answer, thank you.

Hello scricciolina90
Welcome To Support Forums
On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem with Skype and Wireless Networks

I have been having a problem with Airport for about 10 months. Long winded explanation follows.
Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

Hi there
Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
PING 10.10.10.1 (10.10.10.1): 56 data bytes
64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
64 bytes from 10.10.10.1: icmp_seq
and so on.
After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

Is apple going to fix the problems with skype

There is a major problem with dropped IM and video with Skype from the apple products. What is being done about this?

Is the issue just with Skype or FaceTime as well?
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
Have you tried deleting the app and reinstalling ?

Problem with Serial Number from MSi ATi HD4870 :/

Hi all,
I have problem with my HD4870. I lost the serial number (the small paper on back of card) from card. Have I any chance to get it back? I can take a photo and post it here some S/N and P/N from card, if it helpfull... I lose my warranty, if I can't get it back
So, any choice to get it?
Thanks for answers,
Mirek.

Thanks for answers in first,
I have problem with card - I had it two days in Crossfire with another HD4870 but accidentally when I played Metro 2033 I got some stripes on monitor (purple, blue) and then PC stop working. I had to restart PC and when the system booted to Windows, until 10 second I got the same stripes on monitor. Then my PC didn't boot.
On my card I have 4 diodes - when I turned on pc, the diodes blinks but now blinks only TREE of FOUR diods.. So I took the card to shop when I bought it, but the shop-assistant told me, that I need this little paper on Card.. :/
I'm from Czech Republic, so I have a little problem with directly contact to HQ of MSI
So I have to go again to the shop and tell them, that Serial Numbers what they need are in card?

Problem with serial number and installing PSE 12

I purchased Adobe PSE 12 yesterday and the purchase went through. But I never received a confoirmation email from Adobe. Now, when I try to enter the serial number to install, I'm told there is a problem with the serial number and I must contact customer support. Can't get through to customer support though. What should I do? I desperately need to get this program installed. Thanks.

Hi 2Summers,
Please provide me the serial number and I will check it for you.
Send me aprivate message. Do not post it here.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Problem with serial Number in Inspection Lot

Dear All,
I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
*Stock data of serial number XXXXXX not suitable for movement
Message no. IO231*
All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
Any Idea to rectify that problem?
Thanks
Edited by: Ashu on Aug 9, 2010 5:54 PM

Hello,
Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
for inspection type 4 for GR of Production order.
Regards,
JayaVimal

Problem with Skype Number

Similar Messages

Maybe you are looking for