Problem with SLD in XI Configuration

Hi,
I am getting the error like "Role Assignment Failed" while trying to do post installation activities in XI.when we go to SLD Data Supplier Bridge and required inputs are provided in the fields and click on "assign application roles to user groups" .
thanks in advance........
Regards
Ram

Hi Ram,
See these...
role assignment failed on sld data supplier
Role assignment failed
cheers,
Prashanth
P.S Please mark helpful answers

Similar Messages

"Problem with Your Audio/Video Configuration"

"I Tunes Has Detected a Problem with Your Audio/Video Configuration. Audio/video playback may not operate properly."
Does anyone know why I'm getting this error message? After getting it, I usually cannot hear any sound on I Tunes or other media players.
I've already tried uninstalling and re-installing the drivers and it doesn't help. I also have the latest version of I Tunes. Any ideas?

I had this problem also and uninstalled and then reinstalled Quick-time yesterday and the problem was solved.
However when I turned on my PC today, I had the same problem again but this time uninstalling and reintsalling Quick-time is not working.
Anyone any other suggestions as to how to fix this problem?
Thanks.
Dell Dimension 3100 Windows XP

Problem with SLD and Creation of JCo

Hello everyone!
I have a problem with the SLD and the Creation of JCo on the Portal, in trying to create the JCo always tells me that the name used there in the SLD, being that the facility is new.
Who performs the installation, set in the SLD the ECC 6 PRD, delete it to see if I could create a JCo but still the error again when creating the ECC 6 PRD in the SLD I said that already exists and can not create it.
I found a forum which recommended re-import the cimsap .... .... zip and zip CR_Content which would clean everything, I managed to import the zip cimsap ... but in trying to raise CR_Content gives me the following message "All incremental updates of the selected aggregate import for export SAP_CR line have already been loaded before. You require a newer import to update your current content SAP_CR version 4.11." .
I recommend, do the installation again, reload the cimsap.zip and CR_Content.zip a copy homogeneous.
from already thank you very much
Text of error to create JCo destination
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
    at at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
    at at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20081210091801.0000 (release=NW04S_17_REL, buildtime=2009-01-12:09:43:27[UTC], changelist=52884, host=pwdfm114), build date: Tue Apr 28 19:28:39 CLT 2009
J2EE Engine 7.00 patchlevel 48199.450
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.18-92.el5, architecture: amd64
Session & Other
Session Locale en
Time of Failure Fri Aug 28 11:43:53 CLT 2009 (Java Time: 1251474233677)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hello!!
The "SLD" with which I am working up to Portal, the "ECC" installs itself as "ABAP.
Who did the installation and initial configuration, do not leave any documentation about it.
Now I need to create the systems and "JCo" necessary to enable them to implement the "ESS", but errors are presented above.
Some days ago I managed to update the CR_Content, which allowed me to create the "JCo" but at the time of the test, says' com.sap.mw.jco.JCO $ Exception: (103) RFC_ERROR_LOGON_FAILURE "name or password incorrect .
I managed to also create the portal systems, "System Administration -> System Configuration -> Content Portal" and to test it fails on "Test Connection with Connector", which as noted is associated with the connectors "JCo".
For the creation of the system, I think I should create something in the Visual Administrator ", but within the documentation that I do not see anything about it.
thanks for your help!

PI 7.1 - Problem with SLD and Runtine WorkBench

Hi All,
I have installed PI 7.1 on Solaris with Oracle DB.
When i go to http://<hostname>:54600/dir/start/index.jsp and click on System Landscape Directory its opening the following link:
http://54600:54600/sld/index.html (Instead of hostname its taking 54600 where 46 is our instance Number).
Could you please suggest me whether the above error is due to any parameter wrongly set? i have checked all the exchange profile parameters and everything is fine.
If this is the problem with configuration of SLD, Can I re-configure SLD? if so please guide me how to do that.
Even when i login into Runtime Work Bench and clcik on any option like Component Monitoring or Message Monitoring its taking long time stating "Query being Processes", i waited for long time and then the same error unable to reach "http://54600:54600 "
Could you please suggest me how to proceed further?
Thanks,
Subbu

Hi,
     Please check the following configurations:
ABAP stack:
1. SLDCHECK -    check the error.
2. SLDAPICUST - check the 'Host name'
Then, in browser;
http://<hostname>:54600/exchangeProfile
click and expand 'connections' -
com.sap.aii.connect.cr.name   - fully qualified host name
com.sap.aii.connect.integrationserver.sld.name -    is.<instancenumber>.<Hostname>
com.sap.aii.connect.landscape.httpport - 5 <instancenumber> 00
Use fully qualified host name where ever the host name is asked.
Once you edit the exchange profile, not necessary to restart J2ee Engine. Just refresh and check the value are changed.
Hope this will fix the issue.
Sunil Shetty.

Problem with descriptions in Siebel Configuration Wizzard

Hi, I'm trying to solve problem with siebel 8.1.1,
after reainstalation of Enterprise, SWSE, and webclient language (enu language package) on windows XP proffesional , after configuration of oracle 11g database, and IIS server,
I found out that there are no messages shown in install shield Configuration Wizzard,
there is no LANG parameter, SIEBEL_LANGUAGE environment variable, language and locale in system are set to English
descriptions of fields in normal and with -is:javaconsole parameter look like:
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1] 1
[ ] 1 - Create
[ ] 2 - Modify
[ ] 3 - Remove
[ ] 4 - Exit
instead of "Create new configuration"... Additional during configuration of gateway server there is new textbox called PrimaryLanguage. It looks like language file is not loaded with the wizzard, do you have any idea what can be the reason of the problem?
when I use -is:log parameter, it outputs the following file:
file type: 0
file id: 0
length: 187
offset: 299095
file name: instructions.txt
file type: 5
file id: 1
length: 1009
offset: 299282
file name: Verify.jar
file type: 2
file id: 2
length: 723
offset: 300291
file name: launch.txt
file type: 4
file id: 3
length: 30106977
offset: 301014
file name: Windows-Sun-1.5.0.exe
Executing launch script command: "C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE169.tmp/bin\java.exe" -cp "";"setup.jar";"" -Dtemp.dir="C:\DOCUME~1\mirek\USTAWI~1\Temp" -Dis.jvm.home="C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE169.tmp" -Dis.jvm.temp="1" -Dis.media.home="" -Dis.launcher.file="d:\sba81\gtwysrvr\BIN\ssincfgw.exe" -Dis.jvm.file="C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE169.tmp\jvm" -Dis.external.home="d:\sba81\gtwysrvr\BIN" -Xms64m -Xmx128m -Xss2m run "-args" "MODEL_FILE=d:\sba81\gtwysrvr\ADMIN\enterprise_console.scm" "-console" in working directory d:\sba81\gtwysrvr\BIN
file type: 0
file id: 0
length: 187
offset: 299095
file name: instructions.txt
file type: 5
file id: 1
length: 1009
offset: 299282
file name: Verify.jar
file type: 2
file id: 2
length: 723
offset: 300291
file name: launch.txt
file type: 4
file id: 3
length: 30106977
offset: 301014
file name: Windows-Sun-1.5.0.exe
Executing launch script command: "C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE182.tmp/bin\java.exe" -cp "";"setup.jar";"" -Dtemp.dir="C:\DOCUME~1\mirek\USTAWI~1\Temp" -Dis.jvm.home="C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE182.tmp" -Dis.jvm.temp="1" -Dis.media.home="" -Dis.launcher.file="d:\sba81\gtwysrvr\BIN\ssincfgw.exe" -Dis.jvm.file="C:\DOCUME~1\mirek\USTAWI~1\Temp\LRE182.tmp\jvm" -Dis.external.home="d:\sba81\gtwysrvr\BIN" -Xms64m -Xmx128m -Xss2m run "-args" "MODEL_FILE=d:\sba81\gtwysrvr\ADMIN\enterprise_console_sia.scm" in working directory d:\sba81\gtwysrvr\BIN
Output from the launch script execution
StdOut:
title Kreator konfiguracji aplikacji Siebel uruchomi oprogramowanie z następującymi ustawieniami:)
ErrOut:
Best regards,
Mirek Lewandowski
Edited by: user8366313 on 2009-07-14 02:25
Edited by: user8366313 on 2009-07-14 03:15

is there any tool to clean windows registry after siebel installation?

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Problem with transaction CUNI and configuring decimal places

Note: I'm actually an ABAP programmer and do not know almost anything about SAP configuration.
Note2: Sorry if this was posted in the wrong section. I am trying to avoid an ABAP solution so I did not post this in the ABAP section.
Note3: Sorry for cross posting. I'm trying to make this visible to as much experts as possible.
\[Problem\]
I'm tasked to increase the number of decimal places that a certain standard program in MM accepts.
\[ABAP solution I'm trying to avoid\]
The consultants' initial recommendation was to make Z copies of the standard table and the standard programs that references that table. This would be rather dangerous as there is the risk of missing certain parts of the code If I was to replace all occurences of the old standard table with my custom Z table.
\[Standard solution I'm trying to do\]
Now I've read several threads here that makes use of transaction CUNI to adjust decimal places of certain units of measure (see Re: Unit Of Measure problem and change decimal places in PO quantity). However, when I tried it, It does not work the way I expect it to.
In SE11, I created a custom table that has a quantity field (length: 13, decimals: 3) and a unit field (length 3)
In CUNI, I created a new ISO code TST (for test). Then I created a new Unit of measure ZTT (ZTesT) which makes use of my ISO code TST. I set the decimal places to 6.
When I insert data into my custom table, instead of 6, the number of decimal places remain at 3.
Please help in adjusting decimal places without touching the table.

Hello Dzed,
I've read several posts that suggest transaction CUNI to adjust decimal places in standard unit of measures. What I tried is a simplified simulation of what is needed.
In a more realistic sense, consider table VBRP and column FKIMG. What If I want to store items in VBRP and allow 6 decimal places for FKIMG but I am not allowed to modify the table? Is making a Z copy of VBRP the only solution? Or is there a more standard way of doing this?
My worry is that If I copy a table, I also need to copy the programs that use it and modify them accordingly. Our Basis do not want the standard tables touched.
Kyle

Problems with two diffrent Hibernate Configurations

Hy !!
I need once more your Help .
I`m working with Hibernate and the HSQL - DB .
The problem is that i have two diffrent Hibernate - Configuration
(as configuration.cfg.xml) .
One for normal ,one for in - memory use.
Now i�ll try to make a hybernateUtil class which uses this two configurations .
But how and where can i bring these config - Files into my code .
I tried this :
sessionFactory = new Configuration().configure("absolutePath\\configuration.cfg.xml").buildSessionFactory();
but i got this :
FATAL HibernateUtil - Configuration problem: E:\JavaWorkspace\SpeechMachine 0.220\src\hibernateConfiguration\hibernate1.cfg.xml not found
net.sf.hibernate.HibernateException: E:\JavaWorkspace\SpeechMachine 0.220\src\hibernateConfiguration\hibernate1.cfg.xml not found
but it is there .
Do one of you know more .
Please write .
Yours Jonas

E:\JavaWorkspace\SpeechMachine 0.220\src\hibernateConfiguration\hibernate1.cfg.xml not found
but it is there .Better check your assumption. If it says it's not found, then it probably isn't. Maybe you misspelled part of that path. Or maybe it has no rights to access it.

Problem with internet and mail configuration(From France)

Hey x)
I just got my Blackberry yesterday (I'm from France) with Universal Mobile- Bougues Telecome, forfait bloqué pour BlackBerry.
In that "package" i have SMS/mms ,internet and emails unlimited.
But i can't go to internet , its not working and when I'm trying to configure the mail option in "advanced option" , I don't have any kind of confirmation message.
I tried on the website but I got that error message:
"Cannot create account:
This BlackBerry(R) device is not registered with your wireless service provider.
Please register this device and verify that the URL of the current web site matches
the one provided by your wireless service provider.
To register:
1. In the Application list on your device, click Options, or click Settings Options.
2. Click Advanced Options > Host Routing Table.
3. Click the Menu key and click Register Now.
If the error persists, contact your wireless service provider."
And so as I said, I did that manipulation but I don't have a confirmation when I put "host routing table".
And In the email configuration I just have the professional thing.
Can you please help me ?

Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[solved] problem with making dwm for configuration

hello everyone,
i installed and made the dwm following the instructions of this site
https://wiki.archlinux.org/index.php/dw … mmended.29 which seemed to work fine. now i was configuring my config.h in my ~/dwm folder, which leads to the followng error:
makepkg -efi
==> Making package: dwm 6.0-2 (Tue Sep 30 10:26:22 CEST 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing src/ tree
==> Removing existing pkg/ directory...
==> Starting build()...
dwm build options:
CFLAGS = -std=c99 -pedantic -Wall -Os -I. -I/usr/include -I/usr/include/X11 -D_FORTIFY_SOURCE=2 -DVERSION="6.0" -DXINERAMA
LDFLAGS = -s -L/usr/lib -lc -L/usr/lib/X11 -lX11 -L/usr/lib/X11 -lXinerama
CC = cc
CC dwm.c
In file included from dwm.c:288:0:
config.h:35:2: warning: missing braces around initializer [-Wmissing-braces]
1;
^
config.h:35:2: warning: (near initialization for 'layouts[3]') [-Wmissing-braces]
config.h:35:2: warning: initialization makes pointer from integer without a cast
config.h:35:2: warning: (near initialization for 'layouts[3].symbol')
config.h:35:3: error: expected '}' before ';' token
1;
^
dwm.c: In function 'keypress':
dwm.c:1087:2: warning: 'XKeycodeToKeysym' is deprecated (declared at /usr/include/X11/Xlib.h:1699) [-Wdeprecated-declarations]
keysym = XKeycodeToKeysym(dpy, (KeyCode)ev->keycode, 0);
^
Makefile:18: recipe for target 'dwm.o' failed
make: *** [dwm.o] Error 1
==> ERROR: A failure occurred in build().
Aborting...
here is my config.h
/* See LICENSE file for copyright and license details. */
/* appearance */
static const char font[] = "-*-terminus-medium-r-*-*-16-*-*-*-*-*-*-*";
static const char normbordercolor[] = "#444444";
static const char normbgcolor[] = "#222222";
static const char normfgcolor[] = "#bbbbbb";
static const char selbordercolor[] = "#005577";
static const char selbgcolor[] = "#005577";
static const char selfgcolor[] = "#eeeeee";
static const unsigned int borderpx = 1; /* border pixel of windows */
static const unsigned int snap = 32; /* snap pixel */
static const Bool showbar = True; /* False means no bar */
static const Bool topbar = True; /* False means bottom bar */
/* tagging */
static const char *tags[] = { "1", "2", "3", "4", "5", "6", "7", "8", "9" };
static const Rule rules[] = {
/* class instance title tags mask isfloating monitor */
{ "Gimp", NULL, NULL, 0, True, -1 },
{ "Firefox", NULL, NULL, 1 << 8, False, -1 },
/* layout(s) */
static const float mfact = 0.55; /* factor of master area size [0.05..0.95] */
static const int nmaster = 1; /* number of clients in master area */
static const Bool resizehints = True; /* True means respect size hints in tiled resizals */
static const Layout layouts[] = {
/* symbol arrange function */
{ "[]=", tile }, /* first entry is default */
{ "><>", NULL }, /* no layout function means floating behavior */
{ "[M]", monocle },
1;
/* key definitions */
#define MODKEY Mod1Mask
#define TAGKEYS(KEY,TAG) \
{ MODKEY, KEY, view, {.ui = 1 << TAG} }, \
{ MODKEY|ControlMask, KEY, toggleview, {.ui = 1 << TAG} }, \
{ MODKEY|ShiftMask, KEY, tag, {.ui = 1 << TAG} }, \
{ MODKEY|ControlMask|ShiftMask, KEY, toggletag, {.ui = 1 << TAG} },
/* helper for spawning shell commands in the pre dwm-5.0 fashion */
#define SHCMD(cmd) { .v = (const char*[]){ "/bin/sh", "-c", cmd, NULL } }
/* commands */
static const char *dmenucmd[] = { "dmenu_run", "-fn", font, "-nb", normbgcolor, "-nf", normfgcolor, "-sb", selbgcolor, "-sf", selfgcolor, NULL };
static const char *termcmd[] = { "lxterminal", NULL };
static const char *browsercmd[] = { "dwb", NULL };
static const char *surfcmd[] = { "surf", NULL };
static const char *mailcmd[] = { "thunderbird", NULL };
/*static const char *browsercmd[] = { "dwb", NULL };
static const char *browsercmd[] = { "dwb", NULL };
static const char *browsercmd[] = { "dwb", NULL };*/
static Key keys[] = {
/* modifier key function argument */
{ MODKEY, XK_p, spawn, {.v = dmenucmd } },
{ MODKEY|ShiftMask, XK_Return, spawn, {.v = termcmd } },
{ MODKEY, XK_w, spawn, {.v = browsercmd } },
{ MODKEY, XK_s, spawn, {.v = surfcmd} },
{ MODKEY, XK_m, spawn, {.v = mailcmd} },
{ MODKEY, XK_b, togglebar, {0} },
{ MODKEY, XK_j, focusstack, {.i = +1 } },
{ MODKEY, XK_k, focusstack, {.i = -1 } },
{ MODKEY, XK_i, incnmaster, {.i = +1 } },
{ MODKEY, XK_d, incnmaster, {.i = -1 } },
{ MODKEY, XK_h, setmfact, {.f = -0.05} },
{ MODKEY, XK_l, setmfact, {.f = +0.05} },
{ MODKEY, XK_Return, zoom, {0} },
{ MODKEY, XK_Tab, view, {0} },
{ MODKEY|ShiftMask, XK_c, killclient, {0} },
{ MODKEY, XK_t, setlayout, {.v = &layouts[0]} },
{ MODKEY, XK_f, setlayout, {.v = &layouts[1]} },
{ MODKEY, XK_z, setlayout, {.v = &layouts[2]} },
{ MODKEY, XK_space, setlayout, {0} },
{ MODKEY|ShiftMask, XK_space, togglefloating, {0} },
{ MODKEY, XK_0, view, {.ui = ~0 } },
{ MODKEY|ShiftMask, XK_0, tag, {.ui = ~0 } },
{ MODKEY, XK_comma, focusmon, {.i = -1 } },
{ MODKEY, XK_period, focusmon, {.i = +1 } },
{ MODKEY|ShiftMask, XK_comma, tagmon, {.i = -1 } },
{ MODKEY|ShiftMask, XK_period, tagmon, {.i = +1 } },
TAGKEYS( XK_1, 0)
TAGKEYS( XK_2, 1)
TAGKEYS( XK_3, 2)
TAGKEYS( XK_4, 3)
TAGKEYS( XK_5, 4)
TAGKEYS( XK_6, 5)
TAGKEYS( XK_7, 6)
TAGKEYS( XK_8, 7)
TAGKEYS( XK_9, 8)
{ MODKEY|ShiftMask, XK_q, quit, {0} },
/* button definitions */
/* click can be ClkLtSymbol, ClkStatusText, ClkWinTitle, ClkClientWin, or ClkRootWin */
static Button buttons[] = {
/* click event mask button function argument */
{ ClkLtSymbol, 0, Button1, setlayout, {0} },
{ ClkLtSymbol, 0, Button3, setlayout, {.v = &layouts[2]} },
{ ClkWinTitle, 0, Button2, zoom, {0} },
{ ClkStatusText, 0, Button2, spawn, {.v = termcmd } },
{ ClkClientWin, MODKEY, Button1, movemouse, {0} },
{ ClkClientWin, MODKEY, Button2, togglefloating, {0} },
{ ClkClientWin, MODKEY, Button3, resizemouse, {0} },
{ ClkTagBar, 0, Button1, view, {0} },
{ ClkTagBar, 0, Button3, toggleview, {0} },
{ ClkTagBar, MODKEY, Button1, tag, {0} },
{ ClkTagBar, MODKEY, Button3, toggletag, {0} },
i dont understand the error, but as i tried the same with the default config.h, its not due to my changes. i dont get the error when using
makepkg -i
but my changes weren't taken (obviously). for some reason, i cant overwrite the default package!?
greets lizzy
Last edited by caravanlizzy (2014-09-30 14:47:16)

The warning messages are as clear as it gets:
config.h:35:2: warning: missing braces around initializer [-Wmissing-braces]
1;
^
'config.h' is the filename, '35:2' is the position - 35th line, 2nd column. You even get the line in question printed out: '1;' with and "arrow" pointing to it from below - '^'.

Problems with SLD

Hello,
I have two interfaces, the first is a file to bapi interface and the other is a file to IDOC interface. How many products, software components, technical system and business system I need?
Thanks.

Hi,
its depend on the system and the landscape ur using.
if ur sending to two different system, then u have to create two different technical and business system.
The specified item was not found.
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
XI Software Logistics 1: SLD Preparation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak - SLD preview
SLD - http://help.sap.com/saphelp_nw04/helpdata/en/6e/fba1c735e0b44496072595092d924c/frameset.htm
Error while reading ID of own business system from the SLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Phani

OIM problem with weblogic administration server (configuring OIM)

Hi,
I have this software installed:
- Oracle database 11gR2 (schemas made with RCU)
- SOA Suite generic 11.1.1.2.0
- Repository Creation Utility
- Weblogic Server 1034
- JDK 1.6.0_24
- IAM_generic 11.1.1.1.3.0 (OIM)
when I'm configuring the oracle identity management 11.1.1.3.0 and I'm in the weblogic administration server screen I write in the fields:
url administration server : t3://localhost:7001
Username: weblogic
Password: ****** (correct)
when it tries to connect to weblogic I get an error that says:
INST-6180: It has not been possible to get the URL server managed by the OIM domain // (spanish translation of the error)
then if look at the weblogic standard output (and in the admin server log) I see the following error
####<23-feb-2011 21H04' CET> <Warning> <RMI> <WIN-5GJP37O0LUL> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1298491447915> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
     at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getMBeanContextLoader(JMXContextInterceptor.java:475)
     at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:146)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
     at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
     at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
     at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
     at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
     at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Thanks for your time

As mentioned earlier in this thread please use 10.3.3 weblogic .
I have created 8 post step by step installation series for OIM/OAM/OAAM/OAPM inclding SOA here http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/
IDAM 11g certification matrix is at http://www.oracle.com/technetwork/middleware/id-mgmt/identity-accessmgmt-11gr1certmatrix-161244.xls
Atul Kumar
- Book "OAM/OIM 11g for Administrators" -> http://onlineappsdba.com/index.php/2011/02/23/my-book-oracle-identity-access-manager-11g-for-administrators-is-now-available-in-raw-format/
Edited by: onlineAppsDBA.com on May 15, 2011 2:15 PM

Netweaver Developer Studio 7.0 - Problems with MI Plug-in Configuration

Hi,
I installed the NetWeaver Developer Studio 7.0.11 and have problem when configuring the MI Plugin. The configuration page does not save the settings and then it just doesn't show any fields in the screen. Does anyone has the same problem?Any ideas? Thanks in advance.

Hello Jon,
I agree, but 2 GB RAM is sufficient to run the NWDS efficiently, consider the following points to increase its performance.
1. Tweak your eclipse.ini : This will increase the memory usage of Eclipse, but will give you the best startup and working performance. If you think eclipse is using up too much memory, lower the Xms, Xmx and PermSize values.
-startupplugins\org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar--launcher.XXMaxPermSize256m-vmargs -Xms256m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:+AggressiveOpts-XX:+StringCache-XX:+UseFastAccessorMethods-XX:+UseLargePages-XX:LargePageSizeInBytes=4m-XX:AllocatePrefetchLines=1-XX:AllocatePrefetchStyle=1-Dide.gc=true
2. Disable the un-necessary startup plugins
It loads up certain (un-necessary) plugins at startup. We can tweak this a bit to improve the startup performance.
Go to Window > Preferences
Expand General and select Startup and Shutdown
On the right side, uncheck the plugins you don't want to start. Usually, you can uncheck all of them. Don't worry, it just makes the startup minimal. Once you need to access the module in the IDE, it will start it up.
Click OK and restart IDE.
BR
Satish Kumar

Problem with Brother DCP-J315W configuration

I just bought new printer, Brother DCP-J315W, but it seems, that there is no arch/aur package with drivers to this machine. I downloaded deb packages from brother's site, and converted them to tar.gz, then copied the files from this archives to my directory tree. CUPS finds my printer with web interface but all the jobs print "Unable to locate printer 'BRW0022585243C3" error.

IIRC you need to run a couple of those Brother scripts as root before CUPS will register the driver correctly. I think the scripts in the cupswrapper and lpd directories need to be be run first. Then resetup CUPS as usual.

Problems with sound (pulse audio) configuration

My sound system is somehow not working properly. Only one playback at a time is working. Either flash player, a media player, a game. But never both at the same time. I want to use Cinnamon + Pulse Audio. I don't know what I need to install to get it working (pulseaudio, also, oss, ....) I assume the problem is that I installed several sound systems at the same time.
Could you be so nice and help me to determine and fix the problem? I have no clue where to start. I read the appropriate Wiki articles but I'm not sure what exactly I need to do. All I want is a working and autostarting/respawning pulse audio ...
Thank you in advance!
Last edited by cRaZy-bisCuiT (2014-04-27 17:27:26)

:: Installation fortsetzen? [J/n] n
[crazy@tuxgaming ~]$ pidof pulseaudio
1481
[crazy@tuxgaming ~]$ fuser -v /dev/snd/*
Specified filename /dev/snd/by-path is not a mountpoint.
Specified filename /dev/snd/controlC0 is not a mountpoint.
Specified filename /dev/snd/controlC1 is not a mountpoint.
Specified filename /dev/snd/hwC0D2 is not a mountpoint.
Specified filename /dev/snd/hwC1D0 is not a mountpoint.
Specified filename /dev/snd/hwC1D1 is not a mountpoint.
Specified filename /dev/snd/hwC1D2 is not a mountpoint.
Specified filename /dev/snd/hwC1D3 is not a mountpoint.
Specified filename /dev/snd/pcmC0D0c is not a mountpoint.
Specified filename /dev/snd/pcmC0D0p is not a mountpoint.
Specified filename /dev/snd/pcmC0D1c is not a mountpoint.
Specified filename /dev/snd/pcmC0D1p is not a mountpoint.
Specified filename /dev/snd/pcmC0D2c is not a mountpoint.
Specified filename /dev/snd/pcmC1D3p is not a mountpoint.
Specified filename /dev/snd/seq is not a mountpoint.
Specified filename /dev/snd/timer is not a mountpoint.
So this is the trouble?! What to do now?

Problem with SLD in XI Configuration

Similar Messages

Maybe you are looking for