Problem with sleep mode!!! Help!!

I have an Ipod nano and recently updated it. Since then, when my ipod automatically goes to sleep mode it no longer plays the music/audiobooks I listen to, when it would continue before. This is terribly inconvienent and pretty much goes against the whole point of listening to my ipod. HOW do I fix this?! I can only guess it was part of the update. Help

There is another thread about the sleep/wake mode issue as well. I really didn't think that this was my issue until you said that the update included a change in this specifically. I'm not sure why the headphones would start playing music through them until it was plugged in all the way--that would be a better way of preventing this problem and not causing this misunderstanding with the sleep/wake mode. But my issue is that I can not push the headphones in any farther (it does make that click sound and it is clear it is in)...but this problem hasn't been since I bought the nano, just since the update so I know it is related to this change. So basically I have to buy new headphones because of the update??? What I was doing before was unplugging the headphones from the nano in hopes the music would not start playing again in my bag. That seemed to be working fine. Isn't there another solution for people who have the headphones in as far as they can go and don't want to have to replace their headphones?

Similar Messages

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

Problem with sleep mode in Win 7

Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)

Before you continue to wait for solution and waste your time back-up all your important data and reinstall OS again using HDD recovery installation - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
After doing this you will have clean preinstalled and well working OS again.
The first thing you should do after OS installation is to disable automatic Windows update. Do it manually and install important updates only.

USB 2.0 issue with sleep mode--help!

hey there,
so i've searched this forum's board and found that it seems quite a few people have had issues with USB 2.0 and sleep mode on the mac. most of what i read, however, comes from people not being able to put the computer to sleep once new USB 2.0 cards or devices are installed. that is not the problemm I seem to be having, but is this:
I recently purchased a Belkin USB 2.0 PCI card, and installed it on my MAC G4 tower. It seemed to work ok for a little while, but then i noticed that AFTER i put the computer to sleep, when it 'awakens' from slumber, it no longer reads the USB devices. if the device was plugged in prior to sleep mode, it sometimes reads ok. but if I try and plug in a new USB device, such as an iPod or flash drive, no dice. it doesn't mount on the Mac.
I called Belkin tech support, and they were very helpful, but told me that the macs have had issues powering the USB PCI card once the computer is in sleep mode. they even directed me to an apple support page that has downloads that seem to address this, but they're for 10.0-10.0.4. I don't want to download that onto my mac (10.3.9) cuz im worried it might screw something up on my OS.
I would LOVE a download link for a software updater for this if someone knows where it is, otherwise, I may have to return this thing to Belkin and go with a more mac-friendly brand. so im open to that possibility, too.
any help would be GREATLY appreciated!!
cheers,
the quid pro
Power Mac G4 Mac OS X (10.3.9) Dual 1Ghz, 1.5 GB SDRAM

I would either complain to Belkin for a fix if there is one or return the card and try a different one. You should not have the problem, but Belkin USB hubs and cards appear to have more problems like yours than other manufacturers' products.
You might try Sonnet's Tango FW400/USB 2.0 multi-card, for example, or Firewire Direct's 6-port FW800/USB 2.0 card.
You may also want to check this page for some user reports on related products.

Problems with sleep mode in 10.4.7

I recently upgraded to OS 10.4.7 and now the sleep mode doesn't work like it used to. On all other versions of the OS, i'd put the computer to sleep and whenever I wanted to start it up again I'd wiggle the mouse or hit any key on the keyboard. Now, neither of those work. The system goes into sleep mode as usual, but the only way to wake it is by hitting the power button on the tower. Is this an OS bug? Is there a fix? Any help is appreciated. Thanks.
G4 MDD 1.42 Dual, 1.5GB RAM, 4 Hard drives (1 system, 1 media, 1 render, 1 elements) Mac OS X (10.4.7)

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

Problem with sleep mode-T400

Hey Guys,
I have a lenovo T-400, Windows Vista Home Basic 32Bit. When I put my computer to sleep and try to wake it up within 5 minutes, it wakes up but it doesn't wake up when the sleep time goes beyond 5 mins.
Here are the "few" things that I have tried:
1) Installed Windows Xp Pro(Service Pack 2 and 3)
2) Installed Windows Vista Home Premium( My own Copy)
3) Installed Windows Vista Home Basic( Lenovo Recovery Disks)
4) Installed Service packs for the above mentioned windows.
5) Ran Lenovo System Update and updated all softwares(Including BIOS, Power Manager and Display Drivers)
6) Ran Lenovo System Toolbox(which says everything is working fine)
7) Called Lenovo Customer Care every other day for past one month-with no success)
8) Turned Security Chip as "Active" in the bios( as suggested by someone in this forum)
9) Spoke to Lenovo Customer Support to replace my laptop( but they say that it is not a hardware issue so they can't do anything about it)
10) Visited many windows forums and tried installing windows hotfix meant to cure this problem but again no success.
11) I have also tried matching settings of my laptop with another T400 laptop(in which sleep mode works), but no success.
12)Finally I was suggested by a friend to use this forum and that I would definitely get a solution here.
Please help me. I am a student and therefore the proper functioning of sleep mode feature is very important for me.
Also, My laptop is under warranty for one more year.

Hi,
Have you check you settings in Power Manager. If you start it, switch to advanced mode and check inactivity settings for the power profile you are using you will find that you can set times for shutting down certain things. Look if you have things set to shutdown after 5 minutes.
The obvious suspect would be that you have set the machine to hibernate after 5 minutes (although this seems very short). Once you have found the "suspect" change the time to verify that this is what causes the problem.
Mats
Thinkpad T400s, X61s, X41, 600

Problem with sleep mode reset

When my iPhone is unattached from the charging source and the phone goes into sleep mode it automatically, continuously resets itself and kills the battery. There is no way to take the phone out of this cycle unless it is plugged back into a charging source. Once plugged in the phone will automatically turn on and function normally. If the settings on the phone are changed so the phone does not enter a sleep mode the phone functions normally. If the phone is plugged into the power source and goes into sleep mode it does not reset itself, it functions normally. Can someone please help with this problem. I have already completely uninstalled and reinstalled the software via Apple consultant at 800-my-apple.

by "wake up" i mean not powering it up from start. but wake it from sleep. (push sleep button, so it goes dark. then push home button to wake it up again. try swiping up.)
This problem do not happend everytime.
can`t find out when it does.
Thanks for awnsere.

Satellite L505D - Problem with sleep mode in Win 7

It's me again, in last thread :
"Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)"
The sleep mode worked perfeclty for couple of days and it is again gone.. What is more when I try to enter the sleep mode I can't do anything on the notebook , it is still running on blank screen and the processors' fan is working on high speed. During these last days, when the sleep mode worked, windows didn't update itself..
I don't know what is happening.. :) Weird problem, isn't it?

It is not easy to say why this happen. In your last posting you wrote about some windows updates. Who knows what is wrong there.
If nothing helps, not even system restore and you want to use stand-by mode I recommend you to back-up all your data and install OS again using recovery mode.
With factory settings everything will be OK again but then be careful with updates.

Problem With Sleep Mode

I have my computer set up, so that after 15 minutes of inactivity, it goes to sleep mode. Well when I decided to wake up the computer, the computer woke up, but not the monitor. I didn't know what to do so I tried shutting down. it didn't seem like it worked so I tried it again & then I could hear the hard drive making this loud noise. I was able to get it to shut down & it was fine after that. The only application I had open was Safari. This is the first time I have had this issue. Is there anything that I can do so that it won't do that again or should I contact Mac support? Thank you!
iMac G5 Mac OS X (10.4.7)

EletricB,
That box being checked is the "default" setting at System Preferences>Energy Saver>Sleep - towards the lower left just above the "Restore Defaults" button. Yours is probably still checked if you're not aware of it. It won't be long and you'll soon feel like an old hand with your Mac.
I'm not aware of any official reasoning for the default setting, although there may be one that sounds perfectly logical. I simply believe it is unnecessary. Most everyone today is in a hurry, so making them wait for an extra second or two just to be able to get back to work (after someone gets a phone call that takes their attention from doing anything at all with the computer) is a penalty more than a help.
Leaving it checked will not be worthwhile in extending the life of the hard drive. Mine is unchecked and my computer (and its hard drive) are on 24/7 without issue.

T61 has a problem with sleep mode

When I turned on stand by mode for my T61, after about 3 second, my computrer automaticed restart. Help me ! Thank !

When I turned on stand by mode for my T61, after about 3 second, my computrer automaticed restart. Help me ! Thank !

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

Problem with Fullscreen mode

Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C

Problem with sleep mode!!! Help!!

Similar Messages

Maybe you are looking for