Problem with SlideShow Settings

Hi
I've just upgraded to iPhoto'09 and it's working great, but I have a problem with the SlideShow settings:
When I choose a face, event or a place and press the "Play" button to start the slide show, I choose the settings I want (like unchecking repeat slide show and checking shuffle slide order), and check "use settings as default), when I close iPhoto or change the face, place or event, settings come back to their original status, not the ones I chose and made as default.
Any Ideas?

That's because you've set the default for that Slideshow, not all slideshows.
Regards
TD

Similar Messages

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Problems with slideshows on iphoto and Apple TV (no sound)

I have encountered a problem with iPhoto slideshows when streaming to Apple TV (using mirroring). The slideshow plays ok, as far as the photos are concerned, but no sound is coming through. When I play the slideshow on the iMac, the slideshow is fine - photos and music playing as they are set up in the slideshow settings.
Is anyone else having the same issue? It has previously worked fine so I wondered if it might be something on the most recent update?

Hello, I don't have any of those things, but...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Music synch problem with slideshow

I've done quite a number of slideshows and used a song from my iTunes as background. Always worked fine, but my latest creation has a problem: part way through the show, the music starts over. I have checked the source song and it's fine. Nothing seems odd in the slideshow settings. Any experiences like this and solutions?

Welcome to the Apple Discussions. Delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Launch iPhoto, reset its preferences back to what you want, i.e. appearance, etc., and then try the music again. You'll find that the iTunes playlist is back to its original order set in iTunes.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Big problems with slideshows

Hi, I've a big problem with iPhoto (and Aperture too, but I'll say later).
Two days ago I was creating a small slideshow (18 pictures) and everything was fine. Suddenly, while I was looking for a theme, switching between 3 of them, iPhoto stopped to work. No ESC, no key, I had to restart my iMac, turning it off.
From this moment every slideshow I select, iPhoto stop to work and need a force quit. So I restored a library, from Time machine, but nothing changed.
So I bought Aperture, but nothing changed, using iPhoto Library.
Now I've created an Aperture Library, importing in it my old iPhoto Library. Is there any way to "clean" iPhoto, reinstalling it from new? Do I need such a action?
Thank you and best regards.

That means that there is something in your account that's the culprit. First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails it might be another preference file that's causing the problem. Here's how to test for that:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot.
5 - run the application again and determine if the problems is fixed
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot.
OT

Problem with memory settings

Hello,
i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios v3.9).
I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
Has anybody an idea why this happen and how i can fix it ?
Thanks,
Fab

Hi there,
For some reason the BIOS settings have a rather confusion relation.
This is what my experiences have been, please try them and report your findings:
- MAT is enabled (and overrules SPD or manual memory timings) if:
Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
To get a stable system, I'd advice the following:
- Go back to default BIOS settings.
- Disable D.O.T.
- Disable Spread Spectrum
- Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
- Choose SPD timings for your memory (or set them below SPD timing manually).
- Start with performance settings to SLOW.
Check memory timing settings (chipset) with AIDA or CPU-z.
Check stability with Prime95 & torture test on maximum RAM.
Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
Once you got it stable, continue from here.
Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
If anyone has techdoc on these matters, I'd appreciate an URL.
Bios 2.3 on 865PE neo2-LS
Twin Kingston ValueRam Cl2.5 (winbond)

Problem with Global settings panels

Using Flash player v10,1,53,64. with IE7 and Safari 5. I am trying to turn off the auto update notification as I work in an infant school and the pop-up notifications confuse the children.
Flash objects are working fine and the http://www.adobe.com/software/flash/about/ page tells me that I have the version of Flash installed with no problem.
I then right click on an active Flash object on a web page and choose "Global settings..."
Then choose Global Notification Settings Panel... , which takes me to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
At this point, instead of the panel I get the "This content requires Flash" replacement item - so I can't go any further. The same sthing happens with any of the Settings panels.
So one page on the Adobe site says I have the player installed, others don't.
Help much appreciated.

pwillener wrote:
Does that happen on all browsers?
Anyway, another way of disabling update notifications is by using a mms.cfg file; see http://kb2.adobe.com/cps/167/16701594.html for details.
It has happened with all the browsers I have checked, some may be a bit out of date as we don't use them regularly but I have the problem with
Internet Explorer 7.0.5730.13
Safari 5.0
Firefox 3.0.19
Chrome 5.0.375.86
I'll have a look at the mms.cfg option this afternoon.
I'm beginning to wonder whether this is caused by a firewall problem. I don't control the firewall settings. I've been assured by our network team that there is no block, but I'm wondering if that is right. I suppose they could have a block on flash content from not specifically authorised sites (which might well include Adobe) that would still let the Adobe site interrogate to find out the Flash version - but as I'm not 100% certain how the protocols work I can't be sure, I'll have to recheck that one.
Thanks for the help so far.

Problem with national settings on DS9i

Hi all,
I just installed Forms Developer 902 on Windows NT.
In registry my NLS_LANG=POLISH_POLAND.EE8WIN1250.
The Form i Menu module support my national settings
and don't have any problem with polish font.
My destination platform for OAS 902 is SUSE80 Linux.
I maked ftp binary copy *.fmb and *.mmb files from NT
to destination platform and compile everything.
But Form and Menu module not support my national settings.
Where is problem? Maybe any idea?
In {ORACLE_HOME}/bin/f90genm.sh
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250 and
in {ORACLE_HOME}/forms90/server/default.env
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250

Hi Billhp49,
Here are the first things I would try for being unable to send mail:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Cheers!
- Ari

Problem with Blacklight-settings

I recently purchased my first IPod (30GB) and I'm having a problem with a couple of settings. The blacklight is set to switch on after 10 seconds and at the same time my Ipod starts playing music (even when the lock is on). Did I forget to change a setting? I can't seem to figure it out. If anyone could get back to me about this I would really appreciate it.
Thanks in advance!
APPLE MA146 IPOD VIDEO 30GB BLACK Windows XP Pro

I recently purchased my first IPod (30GB) and I'm
having a problem with a couple of settings. The
blacklight is set to switch on after 10 seconds and
at the same time my Ipod starts playing music (even
when the lock is on). Did I forget to change a
setting? I can't seem to figure it out. If anyone
could get back to me about this I would really
appreciate it.
Thanks in advance!
APPLE
MA146 IPOD VIDEO 30GB BLACK Windows XP Pro
That sounds like the alarm is set if it comes on after a set time. You can find the menu options for this in -- extras--clock--alarm clock. This is where you select the play list to play on wake up.
Hope this helps

Problem with configuration settings.

I have a Nokia 3110 classic .Recently I had a problem with Personal Configuration settings .
When I want to add new App types it displays "Cannot add new account.Memory Full."
So I also cannot be able to save Configuration settings as it displays"Only 70 sets allowed.Settings discarded".
So please help me.
Solved!
Go to Solution.

A workaround is available on internet, Not on this forum. But i am afraid i am not allowed to post it here.
Try to Google this keyword " Only 70 sets allowed.Settings discarded"
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

This is a tough one! Problem with sequence settings....

OK...where to begin!
Here is some background (I have posted many questions about these issues and have resolved most of them, except this project)
1.Recently upgraded to 6.0.1
2. 'lost' my scratch disc (ok, I accidently deleted it)
3. All projects are OK to do without, except this one!
4. The footage for this project was from 2 cameras: one is DV and one is HD. The HD footage was downgraded to DV during capture from camera for the original project. Now, with 6.0.1, I bring it in HD and mix the footage on the same timeline with the DV (which is so cool and so much easier for me!) But I wanted to make sure and do the same thing I did for the original clips on this project, so when I just batch captured all the clips, I brought the HD in as DV. Both were shot wide screen.
This one sequence is 6 minutes long and I COULD recreate it, but it is very detailed and has a lot of filters, edits, etc. Here is the problem:
I did a batch capture on all the clips and successfully got all the clips back and the timeline plays, but the two different "cameras" footage looks different in the canvas: (the sequence settings are frame size: ntsc dv 3:2, pixel aspect ratio ntsc-ccir601/dv and anormorphic is checked)
The HD footage, downgraded to DV, looks fine
The DV footage is stretched, and has a bar on the top and bottom.
I have played around with the sequence settings and these are the best results i can get.
Now I made a new sequence with same settings as above and i dragged a couple different clips from the browser into the timeline and they are fine... (these clips are the same ones in the problem sequence that look stretched)
Any ideas??
Thanks in advance!!

I understood that the sequence looked at the first stuff dropped into it for behavior. If you dropped the problem material from the first sequence into the second sequence you created prior to dropping any thing else in then it will behave as you would expect. if you dropped footage that wasn't formatted the same as your sequence settings you get the "...would you like to ..." and the sequence settings get changed. I avoid this because some of the changes applied don't allow my Kona to playout.

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

Problems with transparency settings

Hello everyone
I'm having some problems with the transparency settings of my u3d model when I import it in a new Acrobat sheet. I defined an animation with some transparencies in 3D Toolkit and when I import the whole animation into Acrobat 3D the transparency settings disappear, the whole model can be seen. Any ideas why?
Thank you
XR

Xavier,
I would recommend visiting Right Hemisphere's "Deep Exploration" forum for an answer to this.
http://www.righthemisphere.com/forum/forumdisplay.php?s=&forumid=16

Problem with SlideShow Settings

Similar Messages

Maybe you are looking for