Problem with SMC(Solaris Management Console)

Hi
I am trying to start SMC for managing the users and groups.But i am getting the following errors.
bash-3.00# smc
com.sun.management.viper.CriticalStopException: javax/help/JHelp
at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:276)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(BaseConsoleOptionsManager.java:752)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsole(BaseConsoleOptionsManager.java:621)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:167)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:834)
Could any one help me out.
Thanks inadvance.

Instead of using SMC - why not use the format command - this utility has traditionally allowed the sysadmin to perform disk related tasks. If you plan to be "playing around" with disks on a solaris system - smc is not the tool. If you had intended to use ZFS - you're stuck with the command line (really sucks if you're dependent on GUIs). Either use the free SVM command line or get a copy of Veritas Foundation Basic Suite "free" (but crippled - limited to 4 volumes and 4 filesystems) - http://www.symantec.com/enterprise/sfbasic/index.jsp. At least with Veritas - the GUI will step you thru the entire process of disk management. I can't say that for SVM, with a bit of persistence and skill - you might not be disappointed. I prefer the command line because you can specify a myriad of parameters that the GUIs can't initutively tell you.
Storage Foundation Basic 4.1 is available on the following platforms:
* Solaris 10 x64
* RHEL 4 (Xeon, EM64T and AMD Opteron) and Itanium 2
* SLES 9 (Xeon, EM64T and AMD Opteron) and Itanium 2
Storage Foundation Basic 5.0 is available on the following platforms:
* Solaris 8, 9, 10 (SPARC)
* AIX 5.2/5.3
* Red Hat Enterprise Linux 4 (RHEL 4) on EM64T/Opteron
* Novell SUSE Enterprise Linux Server 9 (SLES) on EM64T/Opteron

Similar Messages

SMC - Solaris Management Console in whole root zone

Hi,
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.
Thanks...

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

SMC (Solaris Management Console)

On a fresh install of Sparc Solaris 9 - the SMC app works. Upon patching to yesterday's 9_Recommended - it fails - the applets all have red stop signs in the console, and it says someting like - 'There is no server running...' and 'No Solaris Management Console server was available on the specified server.'
This is in the console:
kermit console login: java.io.FileNotFoundException: /var/sadm/smc/properties/.s
erver (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at com.sun.management.viperimpl.util.security.SMCSSLConfig.setu pServer(S
MCSSLConfig.java:114)
at com.sun.management.viperimpl.server.ViperWbemServer.main(Vip erWbemSer
ver.java:61)
Starting Solaris Management Console server version 2.1.0.
endpoint created: :898
Solaris Management Console server is ready.
I have tried to stop/start/restart the server with the init.wbem script in /etc/init.d
Thanks for any hints!
S7

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

SMC(Solaris Management Console) problem

Hi
I am trying to start SMC for managing the users and groups.But i am getting the following errors.
bash-3.00# smc
com.sun.management.viper.CriticalStopException: javax/help/JHelp
at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:276)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(Base ConsoleOptionsManager.java:752)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsol e(BaseConsoleOptionsManager.java:621)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(Ba seConsoleOptionsManager.java:167)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsole OptionsManager.java:834)
Could any one help me out.
Thanks inadvance.

Instead of using SMC - why not use the format command - this utility has traditionally allowed the sysadmin to perform disk related tasks. If you plan to be "playing around" with disks on a solaris system - smc is not the tool. If you had intended to use ZFS - you're stuck with the command line (really sucks if you're dependent on GUIs). Either use the free SVM command line or get a copy of Veritas Foundation Basic Suite "free" (but crippled - limited to 4 volumes and 4 filesystems) - http://www.symantec.com/enterprise/sfbasic/index.jsp. At least with Veritas - the GUI will step you thru the entire process of disk management. I can't say that for SVM, with a bit of persistence and skill - you might not be disappointed. I prefer the command line because you can specify a myriad of parameters that the GUIs can't initutively tell you.
Storage Foundation Basic 4.1 is available on the following platforms:
* Solaris 10 x64
* RHEL 4 (Xeon, EM64T and AMD Opteron) and Itanium 2
* SLES 9 (Xeon, EM64T and AMD Opteron) and Itanium 2
Storage Foundation Basic 5.0 is available on the following platforms:
* Solaris 8, 9, 10 (SPARC)
* AIX 5.2/5.3
* Red Hat Enterprise Linux 4 (RHEL 4) on EM64T/Opteron
* Novell SUSE Enterprise Linux Server 9 (SLES) on EM64T/Opteron

Updated Java "broke" SMC (Solaris Mgmt Console)

Hello,
I have a SunFire 280R running Solaris 8.
The application running on the system will be upgraded soon, and required that I update Java.
I believe I've missed some steps, as the SMC (Solaris Management Console) will not run now.
I've read the SMC FAQ, but may have missed something. Any help would be appreciated.
Before doing anything:
# java -version
java version "1.4.1_03"
# cd /usr
# ls -la java
lrwxrwxrwx 1 root other 6 Mar 14 2003 java -> ./j2se
I installed a recent version of Sun Java from a CD-R which I had burned:
# cd /usr
# /cdrom/java_1_5_0_04/jre_1_5_.sh
agree?
Unpacking...
Checksumming...
extracting...
inflating...
Creating
Done.
# /cdrom/java_1_5_0_04/jre_1_52.sh
agree?
Unpacking...
Checksumming...
Done.
After the installation was complete, I replaced the link:
# cd /usr
# rm java
# ln -s /usr/jre1.5.0_04 java
# ls -la java
lrwxrwxrwx 1 root other 16 Oct 11 09:11 java -> /usr/jre1.5.0_04
# java -version
java version "1.5.0_04"
When I attempt to launch SMC from the CDE menu bar, it tries, then fails, without a message.
When I open a terminal and type "smc", it tries, and then I get a message that there is no valid version of Java in the places that it expects it, just as the FAQ mentions, and to either fix and try again, it set $JAVA_HOME.
This is right about where my knowledge of Solaris 8 abruptly ends. If I can type "java -version" in a terminal window and get the reply "java version "1.5.0_04"" then why can't SMC find it?
I am stumped. Someone tried to help by telling me to edit the .bashrc file, and add $JAVA_HOME, but I can't find that file on this system anywhere.
I was able to get the SMC to launch once, after trying to set $JAVA_HOME, but it apparently only worked for that terminal window. After the SMC was closed, and the terminal window closed, and someone tried to launch it from a new terminal window, it didn't work again.
I'm stumped. How can I get SMC to play nice with the newer Java? I know enough to know that this is probably very basic, and I am just forgetting something obvious.
thanks very much for your help!
-Bill

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

No Solaris Management Console server was available

I just installed solaris 8/07 fully patched the OS using smpatch went to use smc and get No Solaris Management Console server was available error.
# netstat -a | grep 898
localhost.898 *.* 0 0 49152 0 LISTEN
fmri svc:/application/management/wbem:default
name SMC and WBEM Server
enabled true
state online
next_state none
state_time Sat Jan 31 21:01:59 2009
logfile /var/svc/log/application-management-wbem:default.log
restarter svc:/system/svc/restarter:default
contract_id 102
dependency require_all/error svc:/milestone/sysconfig:default (online)
log::
[ Jan 31 21:01:57 Stopping because all processes in service exited. ]
[ Jan 31 21:01:57 Executing stop method ("/lib/svc/method/svc-wbem stop") ]
[ Jan 31 21:01:59 Method "stop" exited with status 0 ]
[ Jan 31 21:01:59 Executing start method ("/lib/svc/method/svc-wbem start") ]
[ Jan 31 21:01:59 Method "start" exited with status 0 ]
I have even uninstalled all packages related to smc reboot, and then reinstalled them from the dvd reboot.
Still won't load so I patched back up.
Any idea?
Thanks
Admin please move or delete this post I have tried and can't find an option to delete.
I'm really sorry I put this in the wrong forum. Center not Console.
Edited by: mark42324 on Jan 31, 2009 6:22 PM

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

No Solaris Management Console was available on the specific server

Hi all,
We had just finish setting up a new Solaris 10 environment. When i launch smc on the server, on selecting toolbox there's an error message:
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running.
However, upon verifying whether smc is running:
./init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Not sure why this error message appeared, thanks.

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

Problem with solaris management console

I have installing solaris 9 x86 12/02 on my PC. After start solaris management console 2.1 and after loged in as root, smc display this message:
System Information is not able to connect to the server because the WBEM server daemon does not appear to be running. If it is running, try stopping and restarting it. After restarting the daemon, please also exit and restart the Solaris Management Console.
SMC server is running ok.
# /etc/init.d/init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Thank you for help.
lukas

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Enhanced Storage Problem in Solaris Management Console Started in XManager

I have Sun Fire 480 with solaris 5.9 installed on it. I use XManager 1.3.9 on windows 2000 workstation to connect to it and launch Solaris Management Console (smc). After starting smc I point to Management Tools -> This Computer (sf480dbs) -> Storage -> Enhanced Storage. At that moment Log In dialog appears and I give root user name and password. After a few seconds SMC disappears (exits). If I look at CDE Error log there is the following exception
Thu Jul 31 21:00:36 2003 (/usr/dt/bin/dtexec) /usr/sbin/smc
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@4db52b
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:148)
at javax.help.search.MergingSearchEngine.merge(MergingSearchEngine.java:82)
at javax.help.JHelpSearchNavigator.merge(JHelpSearchNavigator.java:160)
at javax.help.JHelp.addHelpSet(JHelp.java:322)
at javax.help.JHelp.helpSetAdded(JHelp.java:288)
at javax.help.HelpSet.fireHelpSetAdded(HelpSet.java:344)
at javax.help.HelpSet.add(HelpSet.java:256)
at com.sun.management.viper.console.gui.help.VHelpViewer.consoleAction(VHelpViewer.java:138)
at com.sun.management.viper.console.VConsole.notifyListeners(VConsole.java:566)
at com.sun.management.viper.console.VConsole.consoleAction(VConsole.java:512)
at com.sun.management.viper.console.gui.VGUIConsole.consoleAction(VGUIConsole.java:566)
at com.sun.management.viperimpl.console.gui.SMCConsole.consoleAction(SMCConsole.java:292)
at com.sun.management.viperimpl.console.BaseConsoleManager.notifyListeners(BaseConsoleManager.java:370)
at com.sun.management.viperimpl.console.gui.GUIConsoleManager.loadOnlineHelpForTool(GUIConsoleManager.java:1198)
at com.sun.management.viperimpl.console.BaseConsoleManager.loadToolAndReplaceStub(BaseConsoleManager.java:2139)
at com.sun.management.viperimpl.console.BaseConsoleManager$ClickLoader.run(BaseConsoleManager.java:2060)
at com.sun.management.viper.util.ThreadPool$ThreadWorker.run(ThreadPool.java:138)
Caused by: java.security.InvalidParameterException
at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
... 21 more
Can anyone tell me anything what is problem?
I am newby to solaris and any ideas will be appreaciated.
Thanks in advance
David Suladze

Try search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
As I know, smc runs only in graphical mode.
I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.

Solaris Management Console (SMC) - Solaris 9 x86

I�ve just installed Solaris 9 (x86) version. I�m unable to install Solaris Management console.
I was using below command to add listed patches:
pkgadd -d . SUNWpmgr SUNWrmui SUNWlvmr SUNWlvma SUNWlvmg
I�m unable to find these packages on cd1. Somehow they�re on cd2. These cd�s are direct extract from Sun�s web site.
Anyway when I run the pkgadd command I�m getting the following error:
�No package associated with (SUNWpmgr)�
When I look into the SUNWpmgr, there are 2 files (pkgmap., pkginfo.) and 3 dir (install, archive, reloc)
Same with other packages
Please help me.

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

Jds-help and Solaris Management Console compatible with jdk6u1?

Hello,
I am running Sol 10 11/06 for sparc on a Sun Blade. I just upgraded to jdk6u1 from jdk5. I installed all required j6 packages, and then installed patches for j6u1. I then used pkgrm to remove all jdk5-related packages (I searched for all packages starting with SUNWj5 and then removed them). Java seems to be working fine.
Now, my Desktop Overview and other java-related help functions do not work. I get this error:
# jds-help ghelp:jdsoverview
** (jdshelp:826): WARNING **: An exception occured 'Unknown CORBA exception id: 'IDL:omg.org/CORBA/COMM_FAILURE:1.0''
A large jre error log is produced that mentions a problem with JVM:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xfc94dd6c, pid=1338, tid=1
# Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x14dd6c]
Solaris Management Console does not work either, and gives an error that no suitable java 2 version is installed in /usr/java.
Maybe I removed a j5 package I shouldn't have. Which j5 packages are related to the operation of jds-help? Any ideas as to what is causing my problem with jds-help and smc?
Does anyone know FOR SURE that jdshelp and smc are compatible with jdk6u1?
Thank you...

I got rid of jdk6 and re-installed 1.5.0.11. Solaris Management Console 2.1 works again, so it appears as if smc and Sun Studio 11 are both INCOMPATIBLE with jdk/jre6.
jds-help still does not work, with a jvm error, so perhaps it is also incompatible with jdk/jre 1.5.0.10+.

Solaris Management Console Server Problems

When I try to run Solaris Management Console, I get an error saying that the server is not running on port 898. I have followed the instructions on hte FAQ. I see no instances of smcboot running in the processes. When I run /etc/init.d/init.wbem start it returns to the prompt with no additional information. When I then run /etc/init.d/init.wbem status - it says the server is not running. Anyone have any ideas ... this is driving me nuts. I have gone so far as executing smcwbemserver by hand, and it returns "smcwbemserver [7]: /lib/functions: not found"
Does ANYONE have any ideas (faint sobbing sounds in the background...)

I've got the same problem on b63 aswell if I start wbem manually I get no error (infact I don't get anything) and the server just dies. Also had the same thing on a previous Solaris 10 beta and through trial and error found it to be /etc/resolv.conf misconfigured. Unfortunately I can't quite remember what I done to fix it , if I remember I'll post back.

Managing LDAP users with Solaris Management Console

I'm using Solaris Management Console (SMC) to manage users in our Directory Server. Unfortunately, the default "user manager" in SMC does not have a tab to manage netgroups. Does anybody else use SMC to manage users and have you created a custom tool to manage netgroups? If so, how did you do it?

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Cannot start Solaris Management Console in Solaris 9

I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else.
There is a error: "Assertion Fail: Offset < fFileSize ..." something like that.
Please help me~~~~~~~

Java Bug 4838130:
http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
env JAVA2D_DEBUGFONTS=1 smc
The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
/usr/openwin/lib/X11/fonts/TrueType, i.e.
env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

Solaris Management Console in whole root zones

Is it possible to run smc in whole root zone? Is there a howto for this? I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

Problem with SMC(Solaris Management Console)

Similar Messages

Maybe you are looking for