Problem with SN doesn't work

Hello I format my computer but don't disable my SN for lightroom.
And now it doesn't work.
The information what i found is : ask an support. for disable the SN
Thanks for your help
PS: sorry for my english, I speak usually in french.

I have got one word for you: Beta.
SAFARI IS A BETA TESTING APPLICATION, NOT FOR GENERAL USE. Apple decided that they would pre-release Safari for Windows so as to openly test the product. IT IS NOT, I will repeat, NOT FOR GENERAL USE.
So stop complaining and go back to FF for a few weeks while all of the muck gets sorted out, okay?

Similar Messages

Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

Powerdns with MySQL doesn't work

I recently switched from ubuntu to Arch and I love it. However I have problems with PowerDNS running with MySQL database. When I set pdns.conf to
launch=gmysql
gmysql-host=127.0.0.1
gmysql-user=user
gmysql-password=pass
gmysql-dbname=database_name
and restart pdns i get this error:
Oct 22 22:43:34 Archlinux pdns[3337]: Caught an exception instantiating a backend, cleaning up
Oct 22 22:43:34 Archlinux pdns[3337]: gmysql Connection failed: Unable to connect to database: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
Socket connection doesn't work either.
If someone could help me out of this I would be very happy.
Best regards!
Jernej

It works! Thank you! Thank you! Thank you!
I wasted so many hours combating this...
I owe you a beer byte! Thx again!

[SOLVED]Something wrong with Locale, "ÅÖÄ" doesn't work in terminal.

If you have this kind of problem stated above in the title, or similar, here is what I did...
Make sure you have correct locale, you'll need a UTF-8 one.
As stated in the install guide(or beginner's guide iirc) do the following:
Uncomment one of the locales in "/etc/locale.gen", it doesn't have to be language pacific if you're only after using UTF-8 which provides more characters than normal ASCII.
then run "locale-gen". Make sure to set your "/etc/locale.conf" to "LANG=en_US-UTF8" of course you can choose whatever locale you want not just "en_US-UTF-8". After that make sure to reboot, it may also work with just log-out and log-in again, but I did not reboot and neither log-out and when back in. If it still doesn't work, run "locale" and "locale-a" if the output is "C" in each column just redo what I stated above, if it still not work, then you have to consult the manual, wiki and if you don't find the problem use a search-engine and if you still don't find answer here on the forums, the people here is really helpful!
Last edited by kalle97 (2012-10-01 17:46:16)

" Okey I uncommented sv_SE.utf8 in /etc/locale.gen ...
You're supposed to uncomment "sv_SV.UTF-8 UTF-8", then run locale-gen (with sudo), not "sv_SE.utf8".
That's what I did.
https://wiki.archlinux.org/index.php/Be … ide#Locale
^ Except that you shouldn't use "echo" in this case. That command works well when you're logged in as root, but for sudo, not so much. Check the file with nano and you'll see that nothing changed. For sudo, use tee.
$ sudo tee /etc/locale.conf <<< "LANG=en_US.UTF-8"
Note: You don't necessarily need "sv_SV" for those characters to show up. Setting a "sv_SV" locale would make programs show up in Swedish instead of English - unless that's what you want. UTF-8 locales will cover those characters just fine (provided that the font from the terminal actually contains those glyphs, of course).
So you mean I can have en_US.UTF8 as locale but still write swedish letters? So the problem is with the font or somthing, not the locale?
If you still have problems, post the output of:
$ ls -l /etc/profile.d/locale.sh
$ curl sprunge.us -F sprunge=@/etc/locale.gen
$ curl sprunge.us -F sprunge=@/etc/locale.conf
$ locale -a
$ locale
Well, I did as the guide told about locale.conf, it doesn't seem to work, even if "locale" outputs correct info now, but I'll try with restarting the X server too, just in case.....

Wireless keyboard with Marvicks doesn't work properly

It's not easy to post this article due it's Marvicks (?) / Apple wireless keyboard problem.
Once I'm at home, I use my MBP like a desktop by connecting with Apple wireless keyboard/mouse. Works Great!
Since a while, I updated to Marvicks with great experience, but my wireless keyboard doesn't react on some uppercase keys. So, what I can do is: switch to caps-lock then type the missing key or type on MBP keyboard to get "T".
Look to here and you will find which uppercase letter doesn't work:
(use only with right-shift combination) aAbcCdDeEfFghHiIjJkKlLmMnNoOpPqQrRsStuUvVwWxXyYzZ.
(use only with left-shift combination) aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStuUvVwWxXyYzZ.
Don't work letters/function:
(right-shift combination) B, G, T
(left-shift combination) T
"fn+delete"
Further, I have "Pinyin - Simplified" language installed. During Chinese input, I need switch to normal alphabet by activate "caps lock". This is an Easy and fast way to toggle between Chinese - English input. (much convinient than Language switch via mouse clicks).
My older OS (Leopard, S.L, Lion) works well, but Marvicks interpret differently. Once "caps lock" and I navigate with cursor keys, sometime it convert my typing into e.g.: "\[34334" (this is not the exactly right sample, due I can't simulate this at this moment), something like that. It looks like the "Escape sequences"
This is frustrating when I write my document without looking to the display regularly.
Please help with thanks!

Martindorcom wrote:
It's not easy to post this article due it's Marvicks (?) / Apple wireless keyboard problem.
Why don't you use the MBP's internal keyboard? Does it also not work right?
Have you tried another external keyboard? If not, you should do that. If it works OK, then you need to replace the one causing all this trouble.

LMS25 / Common Services 3.0 problem (dbpasswd.pl doesn't work)

Hi.
During CS3.0 installation I got an error:
ERROR: Unable to Change password for DSN cmf
ERROR: After install you can change the database password
ERROR: by running /opt/CSCOpx/bin/dbpasswd.pl
I tried to run /opt/CSCOpx/bin/dbpasswd.pl script, but got error again:
bash-2.03# /opt/CSCOpx/bin/dbpasswd.pl all
Please enter the new password for database cmf:
Please enter the new password again for verification:
INFO: Start changing password for database 'cmf'...
Starting database engine cmfEng
ld.so.1: perl: fatal: relocation error: file /opt/CSCOpx/objects/db/lib/libdblib9.so.1: symbol UnixForkProtection_Init: referenced symbol not found
Killed
I tried to set up LD_LIBRARY_PATH, tried to remove .profile, tried even to install solaris 8 from the scratch. It doesn't work even on fresh installation with 8_Recommended and all required Solaris patches. I tried also different installation disks with May 05 patches and without.
ldd doesn't show anything strange:
bash-2.03# ldd /opt/CSCOpx/objects/db/lib/libdblib9.so.1
libdbtasks9.so.1 => /opt/CSCOpx/objects/db/lib/libdbtasks9.so.1
librt.so.1 => /usr/lib/librt.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libc.so.1 => /usr/lib/libc.so.1
libxnet.so.1 => /usr/lib/libxnet.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
bash-2.03#
We have same LMS 2.5 on another server ( same model, same operating system, same patches) and it looks fine.
Could somebody explain how to debug and solve this issue?

Hi.
Also /opt/CSCOpx/selftest/database.pl didn't work with same error message.
I found the cause of problem. I have reproduced this error in test environment. The problem was in 8_Recommended patch cluster for Solaris 8. Patch cluster downloaded in September doesn't cause any errors, but after new patch cluster installing ( late October) CiscoWorks stops working. The reason for it is 109147-39 patch ( linker patch for Solaris). Older version 109147-37 doesn't cause an error in database manipulation. It is enough to run roll back this patch and 2 patches depended on it ( 108652-92, 108773-19). So command "patchrm 108652-92;patchrm 108773-19;patchrm 109147-39" solves the problem.

The wheel of my mouses (i tried with two) doesn't work on Firefox versions after 3.6

It started when i installed Firefox 4. The center wheel of the mouse doesn't work (can click but not shift the webpages). Now i have the 6th version of Firefox and the problem continues. I tried with another mouse (one that i tested with another computer and i know that works) but nothing.
I unninstalled Firefox, restarted the pc, clean the registry with ccleaner and installed it again (a clean installation, not an update like the other times), but nothing again.
Today my brother show me that login in windows with his account (instead of using mine) this problem that not happen, is only in mine (we have both admin accounts).
My OS is Windows 7 64 bits.

Try this one: in about:config find general.autosrcoll and put it to TRUE if there is false.
look this one too
https://support.mozilla.com/en-US/kb/Cannot%20scroll%20with%20mouse%20wheel%20or%20touchpad
the mousewheel.withnokey.action session
thank you

Webutil: webutil_file.file_open_dialog with filter doesn't work as expected

Hi
I just tried to open files by using webutil_file.file_open_dialog. Since I only want to select files with the prefix "brp" (e.g. brp0001.txt, brp0002.lis), I fill the parameter file_filter with the value: brp*.*
This doesn't work. The dialog only shows folders, but not the brp*.* files. I tried with switching to capitals, which doesn't solve anything. With the filter set to *.* the dialog shows all folders and files, so that seems to work ok.
Is anyone aware of this problem and know a solution? I'm using webutil 1.0.2 (beta).

K..here's some logging. As far as I can see it's all normal, but it doesn't work (no matter if I use a last | or not). Should be easy to reproduce.
2003-okt-29 09:42:44.547 WUF[setProperty()] Setting property WUF_GFN_DIRNAME to y:\data\
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILENAME to false
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILTER to (brp_archief*.*)|brp_archief*.*
2003-okt-29 09:42:44.587 WUF[setProperty()] Setting property WUF_GFN_MESSAGE to bestandsnaam selecteren
2003-okt-29 09:42:44.597 WUF[setProperty()] Setting property WUF_GFN_MULTISELECT to FALSE
2003-okt-29 09:42:44.608 WUF[getProperty()] Getting property WUF_GFN_OPENFILE
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Creating Custom File Filter : Mask=brp_archief*.*, Label=(brp_archief*.*)
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Open File mode
2003-okt-29 09:45:27.203 WUF[getProperty()] Value of WUF_GFN_OPENFILE=

Lock user with SCUG doesn't work

Hello,
We use a SLM 4.0 with last SP (12) .
When we connect a new system to our CUA (on this SLM), the lock of user doesn't work. We must use the SU10 transaction to make mass modification of users and create the correct idoc.
I have got any idea about this ?

I have the very same problem, almost identical circumstances, and I believe it is releated to Home folder syncing, not Adobe. I did not have this problem before I started home folder syncing on my OSX home server.
My suspicion for the culprit is logging-out while syncing as you do, while using another machine linked to the same account creates some confusion.
I will test two ways around this:
1- Do not use two machines while syncing in progress. Do not sync if logged in to another machine.
2- Stop syncing on log-out, and only sync during log-in.

After upgrade to IOS 8.3 sync with iTunes doesn't work

After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
Thanks

you'll need to contact your carrier.

Problem with HP SimpleSave not working

I have a 1TB HP SmartSave external HDD, before hand it was with my father and I recently tried to use it again. It's not working, and here are the details:
- When it's plugged in my laptop recognizes it as a CD drive, but one with only 884 KB of space
- Upon clicking the drive, the only thing there is the HP Launcher (552 KB), and I'm guessing this is the problem.
- Obviously, clicking the launcher does nothing.
- I tried looking into the problem and saw the solution about downloading the SimpleSave's software and launching it from inside the HD, but I can't do that because according to my laptop the HD only has 884 KB of space. Any attempt to copy files to the location or extract them there comes up with a "not enough space" error.
- I'm also unable to delete the current HP Launcher application or format this thing.
So, any ideas? I NEED YOUR HELP!!!!

Hello malehussey,
The HDD is not being seen and the limited space is the CD emulator thats attached to the drive being reported.
The CD emulator is a bridge that has to be used for SimpleSave to work.
Have you tried using it in another computer to rule out any issues with your laptop?
If it does work, we can go from there.
Can you tell if the hard drive spins when plugged in?
Also go into Disk Management to see if the HDD is recognized or shows as Unallocated Space. Right click My Computer and choose Manage/Disk Management (depending on which operating system you have).
If it does not show at all, its most likely that the hard drive has met its end of life.
You could go further (if you like tinkering) and tear the case apart, remove the CD card attached to the HDD and hook the HDD directly to a SATA port on a desktop type of PC with a SATA cord. Also you can use a USB to SATA adapter or a HDD Dock to plug the drive into a laptop. Then you can see if the drive will work properly. If it does, then theres a problem with the CD card or connection in the case. The case alone cannot be used to connect the HDD without the CD card installed because of the hookups.
If you can extract the files saved on the SimpleSave drive, you will not be able to use any SimpleSave backups (and possibly any other files saved either) unless you have the CD card hooked to the drive first. The CD card encrypts and decrypts the data on the SimpleSave drive.
Bottom line, its most likely time to buy another external drive.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Synchronization of tasks and interaction logs with Outlook doesn't work

Dear SAP Experts,
I'm workink on CRM 7.0 (release 7.7.06.010).
We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
We just applied today SAP Note 1415263 and Groupware Integration 3.057.
I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
Any idea about what is missing or not already done?
Any help will be apppreciated.
Thanks in advance for your help,
Kind regards,
Grégory KREMSER
Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

Wireless problem - WEP password doesn't work - connection timed out

The problems with leopard connecting to wireless networks is documented all over the forums
But anyway, below is a solution from fred (Genius!!) it comes from
http://forums.macrumors.com/archive/index.php/t-375266.html
You have to do this through SAFARI (then for me camino worked perfectly as well)
1. When you awaken Leopard you get the "None of your preferred networks are available" message.
Cancel it.
2. Ask Safari to open any page. It will, of course, hang with the message "You are not connected to the Internet."
Click on the "Network Diagnostics..." button in the message box.
3. You should get a dialog box titled "Network Diagnostics". The list of "locations" should have the name of your usual network setup highlighted in gray. All the network status signals down the left side will be red.
Click on the "Continue" button in the dialog box.
4. You should see a fresh Network Diagnostics box subtitled "Choose network port configuration"
Click on the AirPort radio button.
Then click on continue.
5. The Network Diagnostics box should be refreshed. You should now see "Select AirPort network" as a subtitle, and one or more wireless network names listed.
Click on your wireless network name (the one your AirPort knows).
Click the Continue button.
6. Type your password in the Password box in the next refresh. (No need for a $. Just your password.) (Don't bother checking the Remember password... box. It seems non-functional.)
7. Click the Continue button.
8. The Network Fairy awakens, makes all the status signals on the left green, turns on your wireless signal strength icon in the top bar, loads your Safari page, and leaves you with the message: "Your Internet connection appears to be working correctly."
9. Beats me why the "other" WEP password entry process consistently fails.
Fred

I must have missed something the first time around with the G3....
I changed the encryption to WPA/WPA2 Personal and all my Expresses AND my G3 iBooks all connect just fine. I still can't get my iPaq 2495b to connect however... It "sees" the router, but just wont connect. As I mentioned before, it does connect if unencrypted with no password, so the problem obviously lies with the password.
The iPaq Authentication choices are: Open,Shared, WPA, and WPA-PSK. There is a second box for Data Encryption with choices of: WEP or TKIP.
I have tried every combination, all to no avail. I have NOT tried stuff like inserting "$" signs, etc.
Any ideas?

Problem with SN doesn't work

Similar Messages

Maybe you are looking for