Problem with soft, blurry photos in Slideshow mode in AB 2.1.1.9

Hello,
I downloaded the 2.1.1 update to AB which was supposed to take care of the blurry photo display in slideshow mode.
It is better than before, but the photos are still not nearly as sharp as they should be. When I display them in any other applications, e.g. xnview they are crisp and clear.
Is it only me, or do you also have this problem?
Is that going to be fixed for good in CS4? Has anyone played with CS4 AB beta?
Regards,
Kefir

Since 11/07 I am using CS3 and Bridge 2.1.1.9 with the slideshow option very sufficiently until Sunday. Since yesterday I try to display a file of 280 photos with filetype CR2 with partial bad effect. The first 40 slides are presented normally, then the next 60 photos but the photos are still not nearly as sharp as they should be which can be easily controlled using immediately CS3 with display mode of about 100 %. Afterwards the next 2 photos are ok. The next part of 10 photos are displayed wrong as before and so on. A short time before the first appearance of this problem I got a message that bridge has a problem but I don't remember which one.
I am using an 19" EIZO display with digital connection and a Matrox card which is really not slow. I would be happy for a solution of this problem.
Regards
Wolfgang G.

Similar Messages

Blurry photos in slideshow mode only, when displaying on TV.

Hi,
I recently purchased the Apple AV cable for the iPhone (the composite version, not the component one). While initially put off by its $50 price tag, it has provided good value. My daughter uses it daily to watch Teletubbies, and the video quality is great for our standard definition TV.
This cable also lets you show photos on the TV. You can show them one at a time, or run a slideshow. My problem is that the photos are really blurry when running in slideshow mode. So blurry I won't use it.
When I view them one at a time, manually advancing each photo, they are sharp. The photos often appear blurry for a couple hundred milliseconds, but then "snap into focus." I am not sure what's going on with that, but it's fine.
The problem is, they don't automatically come into focus when a slideshow is running. Whatever that final "focus" step is, it doesn't appear to be happening. Silly, as the pause between pictures is at least 3 seconds (plenty of time to do whatever is done in the non-slideshow mode).
I don't think the cable is the problem: the very same photos are crystal clear when viewing them with the slideshow paused. I don't think the phone is the problem; my wife has an iPhone as well and the behavior is the same.
I have been hoping this would get fixed in some firmware update, but we're at version 1.4 and the trouble remains.
Has anyone experienced anything similar? Any workarounds?
Thanks!

For anyone else with this problem:
I just updated to the new firmware (2.0), and the issue is gone. Good work, Apple.

Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

Problem with corrupted iPhone photo albums

I have a problem with my iPhone "Photos" app.
When I open it is see hundreds of "ghost" albums in the Albums tab.
I have tried to turn off syncing photos in iTunes and then turn it back on again, and so deleting all albums and photos and then re-applying- but no luck. I also tried to sync with an empty folder on my Mac instead of the iPhoto library, but this still does not delete the albums.
Anyone know how to nuke the photos on an iPhone and start from scratch WITHOUT having to restore the iPhone to its factory state?

Here is what I see when I go to delete some of the rogue albums:
I could keep doing this but there are probably 300-400 of them!!!!!

Problem with some synced photos to my iphone rotating incorrectly

I recently synced a folder of photos in My Pictures to my iPhone 4 via iTunes. 68 picture...21 were taken in a portrait rotation, the rest were landscape. I had no tropuble with the landscape photos. But, after the sync, 5 of the 21 portrait photos had the wrong rotation. From my basic troubleshoot...they are not all rotated incorrectly in the same direction and I confirmed that they all have a similar resolution as at least one of the correctly oriented portrait photos from the same sync. Editing and saving the picture directly on the iPhone is not an option because I am only given the option to save an edited photo to the Camera Roll album. It is extremely frustrating. Why does this process ignore the native orientation of only some of the synced photos? I'd be less confused if it mess up all of the portrait photos. I would very much appreciate any advice to fix this seemingly arbitrary malfunction. Thank you.

I'm having a problem where when I import my iPhone photos into Picasa, photos are rotated incorrectly (even when viewed in Finder). Landscape photos are upside down, portrait photos aren't rotated to portrait orientation. I suspect this has someting to do with the iPhone saving photos without rotating them based on iPhone orientation and instead adding EXIF data to indicate the orientation based on something I read online, but I don't really know. When viewing info for a portrait photo in Preview, it indicates Y resolution is less than X resolution (which is what it should be for landscape photos only), and on the TIFF tab says Orientation 1 (Normal).
So my question is, why is it not being rotated properly in the iPhone for use on other devices? How can I fix this?
It should be noted that important photos with iPhoto or Image Capture makes it display properly in Preview and Finder with updated Orientation information, but still not in Firefox (so... good for some software on your Mac but even still not if you intend to send the picture to anyone... MAJOR BUG ).
BTW using iPhone 4s with latest version of iOS 5.1.1, Mac OS X Mountain Lion.
PS VIdeo orientation is perfect.

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

Problem with Adobe Flash Player in fullscreen mode

Hi everybody, I have noticed a problem with flash player while I'm watching streaming programs in fullscreen mode.
The problem is that when I'm watching something in fullscreen mode and the quality is set to "high" I have a stammer in both sound and image.
When I 'm watching in "medium" quality everything is fine in fullscreen mode.
The default selection is "high", how can I change this to "medium" ?
It's very annoying to change this all the time manually.
thxx in advance
p.s. I use windows 7 64bit ultimate and the latest version of both firefox and adobe flash player

So, you didn't need help with anything, you just wanted to rant?

Aperture2.0 and iweb08 - problems with size of photos

Just got a new Imac and Aperture2 and I have my first problem. Hopefully I can explain this without sounding confusing. I have 10 photos in album "A" in Aperture. The photos are 'web ready' .jpg at 500 pixels by 500 pixels and 72 dpi. When i make an album page in iweb08 and use the media window to bring in my 'aperture album' the photos come into iweb much smaller then there original size, maybe 200 pixels by 200 pixels - I cant resize the images or if I can, there way distorted.
Here's the tricky part.
When I created an album in iphoto08 and placed the SAME photos in it and add it (using the media window, same step as above) into iweb - all the photos display correctly.
So.
What could be the problem with aperture and iweb?? Thanks for any help.
and I have all the lastest updates including the new Aperture2.01
Message was edited by: mezzo17

I tried that (switching the preview resolution from 1/2 to no limit) and it didn't work.
but then
I deleted the entire project folder, with the albums etc. and decided to start from scratch.
With the settings (as you guys suggested) prior to creating my folders and projects
and just created the project folder again, created a new album folder and imported the images again.
and then it worked just fine.
I guess switching the preview quality while the folders 'existed' wasn't updating somewhere.
Sounds buggy.
Anyways. Its working now.
I haven't gotten the .mac side of my new web working yet but you can check out the old site
at www.garage17.com
Thanks for the help.

Problems with Editing my photos - using Elements 7

When I click on a photo to go to full edit, my computer freezes up and I end up having to close the program. It used to work just fine. My computer guy worked the memory of my computer, but it seems to be a problem with this program. Any ideas?

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 7.0\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

I am having trouble with Powerpoint, when I select slideshow mode the program shuts down

Can someone help me? I am having troube with Powerpoint. When I select the slideshow mode the program shuts down.

Assuming you are using Office for Mac, you may want to ask your Office for Mac in the Office for Mac forums: http://answers.microsoft.com/en-us/mac?auth=1.

Problems with re-naming photo files

Hi there, could anyone please give me some advice on a problem I am having with re-naming photos?
I have scanned over 2000 photos onto my mac. I scanned a batch of a couple of hundred at a time, and as I went along I would copy each batch into iphoto and then trashed them off the hard-drive (with hindsight I'm not entirely sure why I did that!). I am now trying to back them all up on to an external hard drive and have run into problems. The file names they saved as are for example img001, because of the number of photos I scanned I have about five photos in iphoto all with the same file name, and when I drag them onto the hard drive to copy them I am of course getting the message pop up that says I already have a file of that name on the hard drive and do I want to replace it, which of course I don't.
So...... I went through all the photos and renamed them so they were all different. However, although they show with new titles, when I click on "Show Extended Photo Info" in the Photos menu, the file name shows as the original one it was scanned as. I have then tried right clicking the photo and going to "Show file", and have renamed the photo there. However it still shows the same file name back in the extended photo info, and when I try to copy it on to my hard drive I get an error message saying "The items on the Clipboard cannot be pasted to this location. One or more of the items may have been deleted or are no longer available".
This is driving me insane!!! Please can someone help me!?

several things most of which have to do with what iPhoto is and how it works
iPhoto is a database program and you must not every make any changes to the contents or structure of the database (the files) except using iPhoto - never via the finder or other programs
as a database you never use the internal structure but use the database tools to access the photos
The only way to backup up the database is to copy it intact as a single entity to a different drive - you can not back it up in pieces
To backup the photos or move them to a different machine you export them from the database (file menu ==> export) and one of the options at that time is to assign new file names
when I drag them onto the hard drive to copy them I am of course getting the message pop up that says I already have a file of that name on the hard drive
So now that you understand how iPhoto works you see that there is a simple solution to this - simply export the photos and use the rename option in the export to assign sequential names to them
I went through all the photos and renamed them so they were all different
If you did this by typing a new title below the photo then you simply export using the use title as file name option
I have then tried right clicking the photo and going to "Show file", and have renamed the photo there
This is using the finder to modify the contents of the iPhoto library and will corrupt your library and make it unusable - to use it you will have to restore it as it was - your backup is the easiest
LN

Problems with manually renaming files in List Mode

I have an iMac 24" 2.4 Ghz with 4 Gb of RAM. Sometimes when I try to rename a file in a folder in List mode, I get unexpected and strange behavior. It is intermittent. It might be that I cannot get the highlighted current name to unhighlight (in cases where I only want to change a portion of the name), or the filename box might disappear, or the folder seems to lockup, or I get blocks every other space instead of letters. Weird, strange results. I do know that I can minimize the problem, if when first entering the filename box (by hitting 'return') I move the cursor via the cursor keys to the right over the extension and then back to the left. When I do that, it seems like I have less problems.
All I can say is that it doesn't seem to be a robust as what I was used to in the Windows world. I'm new to Mac and this is the only complaint I have. I'm ecstatic about my Mac and can't believe I waited this long to convert over to it. If I could get this little glitch fixed, I'll be a 'happy camper'! (the problem's certainly not enough to make me go back to the misery I was in with Microsoft.)
Has anyone else experienced any problems such as this? Or, is there a possibility that there is something wrong with my Mac?
Or, am I doing something wrong?
Thanks for any kind help I receive.
Matt

Finder for Intel is the same as Finder for PPC. Its the same code, sans some endian conversions.
As for the renaming problem. Two things come to mind. In Tiger if you selected a file and pressed return, no matter what view style you were in, it would bring up the edit field and the entire name would be highlighted. In Leopard, this was changed slightly where it will now highlight everything up to the file extension. So if you have a file called 'foo.txt', it will highlight just 'foo'. This is a nice feature IMO because more often then not I don't want to change the file extension, only the 'body' of the file name.
The Edit box disappearing is a bug that has been around for a couple OS releases where if something causes the view to update (more specifically the HIDataBrowser control List View is made of) while your renaming something, it will cancel the rename session. This can be caused by a bunch of things, like the size of a file changing or mod date changing or file being added to the directory etc. It has been around for a while, but has only become more prominant due to the addition of Icon Thumbnails in Leopard. When the thumbnail is created for the file by the Finder, List View updates to show the new thumbnail which cancels the edit session. There are a couple workarounds for this:
1) Switch to Icon or Column View
2) Wait for all the thumbnails to be created before starting to edit file names. Thumbnails appear pretty quickly, and only for the files that are currently visible in the window, so you shouldn't have to wait very long, and it only happens the first time you view that folder.
3) Press Command-J while in List View and uncheck "Show Icon Previews" and then click the "Use as Defaults" button. That will turn off the icon thumbnails for all windows in List View.
I haven't seen a problem with "blocks showing up every other space" though. I assume you mean a solid black square, right? Sounds like an invalid character in the file name. Renaming the file to something else should cure that one.
Message was edited by: petrock

Problem with Creating Web Photo Album

I have Dreamweaver CS 4 and I tried to make a web photo album using a trial version of Fireworks CS4. Once Fireworks starts I get an error message saying there is a problem with Fireworks and it shuts down. The photo album folders and html pages are created, but the pictures aren't there. I've done on another computer and it works great. Could there be a problem with the trial version of Fireworks? I can open Fireworks on its own and works fine.
Thanks for any help

How are you uploading your site to the server? Are you using iWeb's ftp capability? For some unknown reason it can fail at uploading changes to the site and leave vital pages out causing problems like you're experiencing. Have you tried using the File ➙ Publish Entire Site menu option to get all of the new files uploaded?
If this continuse you might have to use a 3rd party FTP client like Cyberduck, YummyFTP or Transmit to upload the new files manually. All of those apps provide a Finder like window of your server so you can easily drag and drop the required files onto the server.
To determine exactly what files are missing and where they go bring up the Activity window (Command+Option+A) for the page in Safari. It will list all of the files it expects to find and indicate those which are missing.
If a file is missing a Not Found will be listed at the right.
Note: The bottom of your Contact page runs off the content portion of the page and can't be seen. Either lengthen the length of the page with the Inspector/Page/Layout pane or add an empty text box and drag it downward pushing the footer area below the last of the content.
OT

Problem with iphone 5 photos

hi ihave a small problem with my iphone 5 .. when i transfer an album from pc to the iphone , it's size doubles in the storage .. for example , if i copied a 50 mega album i find it 100 mega photos .. any solution for that ??

hi!
That's perfectly normal, and happens to other digital cameras when using some types of fluorescent lighting. In the photos usually appears a green dominant and banding associated with tube frequency.

If you have problems with Yahoo, start FF4 in safe mode and see if it works. If yes, you have a problem with one of your add-ons.

Apparently some of your "good" add-ons do not work right with FF4. If you have a problem with YAHOO MAIL, start FF4 in Safe Mode (Restart with add-ons disabled from the Help menu). Then try your Yahoo again. If everything works, then the problem is with one of your add-ons. You can selectively work out which add-on is the problem. For a lot of these user problems, this should help... worth a try anyway.

Anything?

Problem with soft, blurry photos in Slideshow mode in AB 2.1.1.9

Similar Messages

Maybe you are looking for