Problem with Software Update Server?

Hi all
Started up SUS on our 10.5.7 server today after reading a number of threads and the manual.
All the clients are pointing to the server ok and the server has updated the list in server admin. But http://servername:8088/index.sucatalog comes up Not Found in a browser.
The SUS access log shows the request, but the error log shows +[Wed Jul 22 09:18:07 2009] [error] [client 176.29.155.6] File does not exist: /usr/share/swupd/html/index.sucatalog+
So it looks like the catalog isn't been made on the server?
any ideas
cheers Lee

Same problem. I hosed the server anyway due to our annual semester and reinstalled and updated, and now I can't get software update working. I have tried fixes I have found elsewhere to no avail. I am re-applying the 10.5.7 Combo update to see if that helps.

Similar Messages

  • HT201413 May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"

    May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"
    Thank you.

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • HT4993 problem with software update

    I need help how to reslove problems with software update on my iphone 4s.

    Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
    Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install.

  • Is there a problem with iPhone update server, I can't seem to update my IOS on my wife's 3GS iPhone, keep getting message that the server is not reachable, yet I am connected to internet and had no problem syncing the phone or downloading iTunes software

    What's up with the iPhone update server. I have repeatedly tried in recent days to update the IOS software on my wife's 3GS iPhone but keep getting message that the iPhone update server cannot be contacted. The phone syncs normally and I am sure I am connected to the internet properly. Also I have successfully updated ITunes software during this same time frame.  What gives??

    Try this support document http://support.apple.com/kb/TS3694 and look at this section.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors: 
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I have a problem with Software update

    plemI have 6720c
    i want to update it
    after downloading 135mb of updates an error says
    could not connect to the sevice
    There seems to ve a problem with connecting to the service
    make sure that your firewall and virus protecting setting is correct
    ..................... Etc
    i have windows7 is the problem with the server or with something in my pc
    I have tried also to download software for X3-00 but it has the sam pronlem .

    @FireSword
    Welcome to the forum!
    You are not the only one to report issues updating today so perhaps there is a temporary technical hitch; perhaps try again in a few hours before messing with your existing installation.
    Happy to have helped forum with a Support Ratio = 42.5

  • Can't connect with software update server

    need help .....
    I've been struggeling recently with getting updates done in the Mac App Store, roughly since the Mavericks update. Everytime there is a new update available, the Mac App Store can't seem to find it, I get this error everytime I click on the Update tab: An error has occured: Not able to reach Apple server.
    i alredy boot in safe mode but it still not working ....
    this my app store log...
    Oct  7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateController: update scan completed
    Oct  7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateController: _availableUpdatesDidChange removing all updates available notifications because the badge count is 0
    Oct  7 23:28:14 --- last message repeated 1 time ---
    Oct  7 23:28:14 one-international.local storeagent[274] <Critical>: UpdateQueue: Setting hasBeenSeenByUser for all updates
    Oct  7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of updates because the view has already commited an initial load
    Oct  7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of purchased because the view has already commited an initial load
    Oct  7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of top-charts because the view has already commited an initial load
    Oct  7 23:28:16 one-international.local App Store[444] <Critical>: FRStoreViewController: Discarded delayed initial load of genres because the view has already commited an initial load
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: Starting SoftwareUpdate scan with forceFullScan=0 launchedFromNotification=0
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateQueue: Using available-software-updates-extended key for update queue
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController update scan progress at -1.000000
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: ISStoreURLOperation: Starting URL operation with url=(null) / bagKey=available-software-updates-extended
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: -[ISStoreURLOperation _runURLOperation]: _addStandardQueryParametersForURL: https://su.itunes.apple.com/WebObjects/MZSoftwareUpdate.woa/wa/availableSoftware UpdatesExtended
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: update scan completed
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateController: _availableUpdatesDidChange removing all updates available notifications because the badge count is 0
    Oct  7 23:28:17 --- last message repeated 1 time ---
    Oct  7 23:28:17 one-international.local storeagent[274] <Critical>: UpdateQueue: Setting hasBeenSeenByUser for all updates

    You've installed some kind of malware.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Problem with internal update server

    Hello everybody,
    after setting up an Adobe Update Server that works fine with updates for CS6,I would like to use this update server for additional Adobe software like Flash Player and Reader.
    I think I made every steps as mentioned in the administration guide of flash player: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_6_admin_guide.pdf
    Which means:
    I can access the URL: "http://SERVERNAME/pub/flashplayer/update/current/sau/11/install/" with its 3 *.z files (install_all_mac_pl_sgn.z,install_all_win_ax_sgn.z,install_all_win_pl_sgn.z) and "http://SERVERNAME/pub/flashplayer/update/current/sau/11/xml/"  that contains the version.xml-file.
    I've also added the mms.cfg file with UTF-8 and the content:
    AutoUpdateDisable=0
    SilentAutoUpdateEnable=1
    SilentAutoUpdateServerDomain=SERVERNAME
    SilentAutoUpdateVerboseLogging=1
    Unfortunately there aren't any updates for my test-client.I read something that with these options the "Update Section" in the "Advanced"-tab should be greyed out, but it isn't.And if I'm going to click "Check now" my browser is opening the Adobe homepage.
    The problem is that we can't use any WSUS  for this scenario.So we have to deploy the mms.cfg-file by copying it to the clients manually (maybe via batch-file later).
    That's the first problem.
    The second one is that we would like to update the Adobe Reader via the same update server.But I didn't find any guide on how to solve this.
    Following information regarding our scenario:
    AUSST is running on a Windows Server 2003 Enterprise SP2 with IIS6
    Created a new website "Adobe Update Server" and added the handlers for xml,sig,crl,dmg (I had to remove the handler for zip after having problems with it) and added these handlers in the <httpheader>-Section of the webconfig.
    Created a new folder with the structure: pub/flashplayer/update/current/sau/11/ install and xml.
    Installed Flash Player 11.3 on my test-client
    Allowed extensions: All unknown ISAPI-extensions,Active Server Pages,ASP.NET v1.1.4322,ASP.NET v2.0.50727,Front Page Server Extensions 2002,Serversided includes (SSI),WebDAV
    I know that I maybe allowed too much extensions because my knowledge with Server 2003 isn't that well.
    Sorry for my bad english,I've also tried to open a discussion in the german section but there wasn't any reply yet.
    It would be great if there is anybody who could help me with my problems because this features are some kind of "must-have" and I would like to take this big step.
    I appreciate every help and post in this discussion as I'm kinda stuck with these problems.
    kind regards

    [Moved the discussion to Enterprise Deployment Forum]

  • Problem with software update - now can't log on to administrator account

    Hello -
    I updated software yesterday and didn't pay attention to what was updating. I always just install the updates when they come up.
    Now I can't login to my administrator account or change the password. I could log into another account, but iTunes won't stay open. It opens for about 10 seconds then closes.
    So I'm assuming that the updates were a mac OSX update and an iTunes update.
    Does anyone know why this is happening and how to fix?
    Is there anyway to "undo" the most recent update?
    Any help would be appreciated.
    -jamendan

    Hi jamendan, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Is anybody else having issues with Software Update Server offering Airport Utility 6.1?

    Running 10.7.3. Everything else is hunky dorry, but no matter what I do, I can't get this update to show up to clients.
    Settings are set to:
    NOT automatically copy and updates from Apple (but this update shows the blue circle reflecting it's copied)
    NOT automatically enabled copied updates (but this update has the checkbox enabled)
    DELETE outdated software updates (I had previosly been struggling with Choose Version, but this seems to obviate the need for that)
    I've stopped swupd, removed the update, updated the catalog, re-enabled. The catalog updated, the file re-downloaded, but still.... won't show up to clients.
    Is this update (Airport Utility 6.1) working for anyone else? Could it be a global issue related to this update, or is this just another instance of swupd flakiness?

    You can still use iDVD even though Apple doesn't support it. It still works like a champ.
    A lot has changed in the new iMovie. Some of the changes are good, but some not so much. My biggest problem is that the video quality of shared projects is INFERIOR to the old iMovie. So for now, I've gone back to the old version. Hopefully Apple will issue an update that will fix this.

  • Backlight problem with software updat 1.1 for neno

    the new 1.1 software update of 'iPod Updater 2006-01-10' for neno stuffs up the backlight. if i leave the light in always off or always on and try to use (press and hold) menu button to manually switch on and off the back light DOES NOT WORK any more....
    apple pls fix it asap...

    heres wats new with 1.1-
    1. holding menu will take you to the main menu instead of activating or deactivating the backlight
    2. lyrics and album art staying on screen and not disappearing after 10 seconds
    3. Apple Radio Remote support
    4. Line-out problem, occasionally when going from headphones to line-out, there would be no sound.
    5. The 'Alarm' feature has been overhauled, easier to set the time, and a little bell icon is displayed next to the 'Alarm' menu item when it is set.
    6. 'Screen-lock' has also been changed, slightly different interface, the numbers are in sunken boxes as opposed to the red glow. And a new warning is given telling you to hook your Nano up to your comp if you forget your code.
    7. There was a problem with turning off, if you scrolled back or forward through a playlist/album, back to the main menu, sometimes it would not turn off.
    8. The song title is in bold above the lyrics when you go to the lyrics screen
    9. itunes opens almost instantly (within a second or 2) with the ipod showing. Before, this used to take 5-10 seconds, maybe more.
    10. Reduced lag, before, when scrolling and clicking quickly through menus and songs, had some 'slow down', this is gone now.
    11. Before the update I noticed a lag when I would skip songs, the next song would come on but the tags would have a slight lag on them and that has been fixed as well.
    12. More accurate battery meter. Doesn't go down too quickly as it used too. One person said that it actually increases battery life after a testing.
    13. When using the Universal dock with remote the backlight will come on after you change the volume, before the backlight remained off.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Problem with Software update 1.4

    When I start iTunes with my iPod Mini plugged in, it says a software update is available. So I click OK to get it, download and install it - and reboot.
    All seems fine - i.e. no error messages - but when I start up iTunes again, it still says the update is available and should be downloaded.
    I can't copy my purchased files from iTunes to the iPod, as it says the software is too old.
    So I guess the update isn't being recognised for some reason.
    Can anyone give me any pointers on how to resolve this?
    Many thanks in advance.
    Andy

    Actually, I'm having exactly the same problem, but I'm unsure as to what it could be.
    I was going on the 'update marathon' shall we put it, and updated itunes first, now using version 6.0.1.3, before installing the new 4.1 Ipod Updater software.
    I disconnected my ipod (well...because it mentioned that this should be reconnected after installing the software), and followed the instructions - but when I plugged it back in, it came up with 'new update available'.
    Any help much appreciated.

  • Nokia 6280 - problem with software update

    Hi,
    I have a problem updating thge software on my 6280. I've checked for newer soft version, and it turned out that is is availible. Therefore i've installed latest Nokia PC Suite and Software Updater.
    After connecting the phone i got "Connectd phone was not recognized"
    Very well... but what am i supposed to do to make updater recognize my phone??

    Hi,
    sorry to tell you but the 6280 is not listed as compatible with NSU at
    http://europe.nokia.com/A4579163
    There was a lot of commotion around the 6280 last year, apparently there were some product codes that were shared with the 6288 (which is listed as compatible), I'm not quite sure what it was all about. Anyway it looks like you need to visit a Nokia service center to get the sw updated for a 6280:
    www.nokia.com/repair
    All those who believe in psychokinesis raise my hand.

  • Problem with software update version 6.0 Bundle 2333 and email.

    I'm having a problem updating my blackberry bold 9650 with the new service update that came out a couple weeks ago. I left the US for Germany about 3 weeks ago and a couple days after arriving the software update popped up. For whatever the reason, I am unable to load the new update. Neither the 3G service nor connecting to wifi allows me to complete the update. It keeps telling me it can not connect. Now I'm having a problem with my email all of a sudden, as the email icon has disappeared. Whenever I try to reset up my email (which it tells me I need to do) it says I have to do the software update first. Which puts me in quite the dilemma. Apparently no update = no email, which I can not have. Unfortunately I forgot to bring my computer cord to sync my phone, and I really do not want to have to wait until August when I get back to the States to update my phone and have email again. 
    Any help would be greatly appreciated. Thank you. 

    My assumption is that since you're not on the Verizon network currently and you don't have access to the network, you can't OTA the update.
    And since you don't have the USB data cable, you won't be able to connect your phone to your computer to update.  My best suggestion... Get a data cable. There should be someplace nearby you in Germany where you can get an inexpensive data cable.
    Then go about backing up your phone with the desktop manager and then update via the DM as well.
    No, you can't be on TV.
    Yes, this camera is heavy..
    Go bother the reporter...I'm busy!!

  • Compressor problems with software update

    Software update has downloaded and installed once or more every day since last week thursday!
    nothing works, the software update installs 2.01 compressor and QTmaster over and over again.
    DVD Studio Pro is a mess...
    How can I make software update wasting my time and bandwidth?
    Message was edited by: Host

    I was experiencing this same problem with the 3.02 update. It look like I was finally able to resolve it by manually downloading the compressor update and installing it instead of using software update. I only made the change today, but so far software update seems to recognize that I'm up-to-date.

  • Having problem with software update

    Hello,
    I am having problem with reinstalling my software with Nokia Suite. It shows while backing up the data that phone memory is full. However already I have exhausted all the options for freeing phone memory. 
    I need to reinstall my software as my mobile phone is causing some problem.
    I have Asha 305 phone. Kindly reply back if you could help me.
    Regards,
    Ayush Sharma

    Hello @poochini21 ,
    Thanks for replying. 
    The reason i wish to reinstall software in my cellphone because of 'deletion of certificates'. It shows a 'Certificate Invalid, Check date and time settings'. Furthermore, my nokia browser has restored to its default version. And the mail does not work.
    Re backup: I am unable to create backup following the mentioned instruction, it again pops the memory issue. 
    I have already tried to reset my mobile, both the settings and the full reset, which at maximum saves me a free phone memory of 6.0 MB. Moreover I have also tried the option in Nokia Suite, 'Free some space'. That too could not help me out.
    If you can help me out, kindly reply.
    Thanks and Regards,
    Ayush Sharma
    poochini21 wrote:
    Hi ayushmnit,
    Just to clarify, the main reason why you'd like to reinstall the phone's SW via Nokia Suite is due to the memory full error that you're getting, is that correct? Do you also get the same error when creating a backup file using the phone itself? In your Asha 305, try going to Settings > sync and Backup > create a backup. A memory card is required to do this. 
    BTW, is resetting one of the steps you did to free more phone space? If the phone backup process succeeded, try resetting your phone by going to Settings > Restore factory settings. You can select Settings only to just restore the defaul settings, or Restore all to wipe out all your personal data which could free more space in your phone. After the reset, try reinstalling the phone's SW via Nokia Suite and see your Asha 305 will work fine afterwards.
    Let us know how it will go. 

Maybe you are looking for