Problem with software version on my N86 8MP

Hi
I have an N86 8MP with the Virgin network in the uk, I want to use the free sat nav functions but it says i need software version 21.x or better, so i went to the page where i can check the latest software version for my phone and this says that the latest version is 30.x, yet when i go to the page where i can check the latest version for my phone it shows the latest version is 20.115 which is the version i have installed why is this and how can i get the latest software so i can use the free sat nav with the maps on the phone
Regards
Cliff C
Solved!
Go to Solution.

cliffcook wrote:
Is there an option i could have ticked or sent that will not allow my phone to be upgraded when new versions come out?
Hi cliffcook
Nothing that you have/haven't done has affected this issue. Unfortunately N86 8MP had a pretty short production run by Nokia standards for some reason, probably got left behind by pace of development or production cost so there is unlikely to be much incentive to support it by either Nokia or network providers.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Help! New 5th gen problem with Software version 1.2.3!

    Just when you thought you havn't heard about enough problems with the new ipod software here comes a weird one. My Ipod still plays songs and the usual stuff. But the timer at the bottom of the screen that tells you how far you are into the song gets off track, slows down, and eventually starts ticking 3 seconds per 1 real second. And ill start hereing glitches and pauses in the music. And its every song it happens. Thanks for the help!

    Hi,
    I had the same problem. I upgraded my 30G to 1.2.2, and everything looked fine. However, when I disconnected my iPod there were no music or video files showing. But the hard drive space showing as Available under Settings>About>Available indicates that the hard rive space for my muic and videos is still being used. I read a lot of posts about 1.2.2 problems and 7.5 upgrade for iTunes being the fix. I would go to the Help tab in iTunes and tell it to check for upgrade, and it would tell me that 7.5 was avialable. I would click yes to download but nothing happened. I tried this many times, with my iPod connected, not connected, rebooting, etc, it was enough to go insane.
    Here is how I solved it. I went to: http://www.apple.com/itunes/download/
    and downloaded the entire iTunes 7.5 instead of the upgrade. After it installed itself, I rebooted, opened iTunes, and connected my iPod, it synced and now it is back to normal. Beware, if you try resetting your iPod, it warns that it will erase the contents of your iPod hard drive.
    I have windows XP, hp laptop, and a 5th gen 30G.
    Hope that helps solve your problem.

  • Problem with Software Version 6.0

    I updated my Ipod last week and now the only app that works is instagram and ones that don't need wifi my app store doesn't even work, help

    The hard reboot is intended when the device is no longer responding, like a force quit.  It will not do more than restarting which should be try before.
    As for your statement to not restore from backup to solve the issue described, have you reference for this?  Has this work for you?  Because I have read other post saying otherwise (tthis haven't solve the issue with the App Store for many).  Choosing this option may be really an hard decision as you would loose all settings and need to reset all you sync settings which may be time consuming depending on how much data you have.
    Personally, for what I read so far, I'll wait until a first update release to see if most bugs are addressed before putting away my actual backup.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Problems with Italian version of Dreamweaver [subject edited by moderator]

    The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
    Ciao
    Paolo

    Dear Murray,
    unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
    So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
    In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
    Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
    I'm using just CC…
    Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
    >>
    >> Problems with Italian version of Dreamweaver
    >> created by MurraySummers in Dreamweaver support forum - View the full discussion
    >> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
    >>
    >> 
    >> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
    >>
    >> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
    >> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    >> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
    >> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"       
    >> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
    >> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
    >

  • Problems with software the update with Nokia 6233

    Problems with software the update with Nokia 6233
    Hello,
    I have so far some-paints tries my software to update.
    Each time the update procedure begins, sometime stands then on the telephone “test mode”.
    On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
    If I change my profile attitudes since that for example, then after a telephone restart again deleted.
    What there can I make?
    GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

    It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
    You need to take it to a nokia care point for repair under warranty.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.  I get the message "Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already

    I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
    I get the message “Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already exists on this disk”
    If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
    I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
    How can I solve this problem

    Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • Reader 9 - problem with pdf version 1.0 and descenders

    2 big problems over here:
    * Reader9 will not properly open files created as pdf version 1.0/1.x
    all text is cut off about 2/3 of the way down, whether or not in fields.
    * Any pdf file version above 1.0created with any version of GhostScript does not have the previous issue, However - no descenders of any font are coming out.
    We do not have either problems with any version of Reader prior to 9

    Hi creamac,
    Welcome to communites
    Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
    will find that on right hand corner above to task bar of host machine  .
    "Nature always wears the colors of the spirit."

  • TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    Hi, so did I.  It seems to be a huge problem with everyone.  I opened a folder on desktop and called it target.  I copied all my songs into that folder.
    I uninstalled Itunes completely.  Rebooted.  Then I installed a fresh install.
    I then dragged all the songs back to Itunes and it worked.  I hope that helps. 
    I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
    Good luck,

  • P2P blocking on ASA 5525 with Software Version 8.6(1)2

    Hello,
    We have Cisco ASA 5525 with Software Version 8.6(1)2. We have permitted all the traffic from inside to outside.
    Now we want to block P2P sharing Bit torrent to internet sites. Please help me with the configuration.
    We have DMZ setup & also inline IPS module.
    Thanks in advance.
    Regards,
    Sandeshc Chavan.

    Hi Chavan , 
    You can try to block this by port. 
    The well known TCP port for BitTorrent traffic is 6881-6889 (and 6969 for the tracker port). 
    The config is
    Access-list BLOCK-P2P-TRAFFIC deny tcp any any range  6881 6889 log 
    And applies to the desire interface with the "Access-group command"
    For example:
    Access-group  BLOCK-P2P-TRAFFIC outbound interface DMZ
    However Blocking Bittorrent is challenging, and can't really be done effectively with port blocks. The standard ports are 6881-6889 TCP, but the protocol can be run on any port, and the peer-to-peer nature of the protocol means that discovering peers that use unblocked ports is simple.
    Also you can execute  from the cmd on windows  the command  netstat -a and check the port Bit torrent is using .
    Hope this helps.

  • Problem with multiple versions of documents being published with 001, 002, etc.

    I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute  is doing this? Thanks for any help you can give.

    Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

  • Problems with current version of AIR. Won't load and also can't uninstall

    I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
    This application requires a version of Adobe AIR which cannot be found.
    Please download the latest version of the runtime from
    http://www.adobe.com/go/getair,
    or contact the application author for an updated version.
    I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
    Does anyone have any suggestions?
    Thanks.

    I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training. 
    From: lisachao <[email protected]>
    To: A1C PD <[email protected]>
    Sent: Monday, October 24, 2011 12:35 PM
    Subject: Problems with current version of AIR. Won't load and also can't uninstall
    Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
    Is this the error you are getting when you are installing AIR 3.0?  Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications?  If it's the latter, which applications are you trying to run?  Can you please send us your logs so that we can investigate further?  Thanks!
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Installation Issues by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • TS3694 I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)

    I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)

    eepereira wrote:
    an unknown error occurred (-1)
    That Error message is indicative of a Hardware issue. The Device may need Service. Take it in for evaluation.

  • Problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows .webm format instead of flv or mp4.

    problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows only .webm format to download instead of flv or mp4.previous version works fine.also other browsers work fine.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies

Maybe you are looking for

  • Gl account cannot be used when creating Purchase requisition

    Dear Experts, I have the following error message while creating PR : G/L account xxxxx cannot be used (please correct) Diagnosis Comparison of the field selection strings from the G/L account xxxx and the account assignment category W reveals that th

  • Oracle text indexed view is possible

    Oracle text indexed view is possible???

  • How accurate is the output preview?

    The output preview screen sometimes jumps back to a frame from the last shot before moving forward. I'm wondering if this is normal because it's just a low quality video preview, or if my movie will be encoded with those double-take hitches. I have a

  • Logic Board replaced, Time Machine wont recognize old backups

    I just got my Logic Board replaced and obviously having the problem with Time Machine recognizing old backups. I looked at old forums and found the macosxhints page (http://www.macosxhints.com/article.php?story=20080128003716101) on how to fix the pr

  • Fresh install ArchLinux WiFi not showing (icon)

    Don't know whether this is a specific ArchLinux or Cinnamon issue but I'm new to Arch and decided to install (step- by step): - ArchLinux - SLiM - CInnamon Everything is working correctly, I'm a really happy man now, except for a few little thing(s)