Problem with solver DLL load and Excel 2010

Since upgrading from Office 2007 to Office 2010 we've started to experience a problem with the solver addin when our own analytics addins is also loaded. I have found a solution, but I think it may highlight a problem with the latest version of the solver
addin for Excel 2010.
Firstly, to describe the problem - the solver addin seems to load normally when Excel 2010 starts up, however when a "Solve" is performed we are seeing a "File not found: Solver32.dll" error at the final "Keep Solver Solution" stage. This only happens our
own analytics addin is loaded. We've been careful to make sure that our own addin does not change the working directory and also that it has been built against the correct Excel 2010 SDK libraries. We do not see this error with any other versions of Excel
running on the same PC or any other environment.
After some searching we found other people were having similar problems and after a bit more probing I found a solution that works - but that I'm not very happy with.
If I copy the Solver32.dll from:
  C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER
    (where it was installed)
into :
  C:\Windows\SysWOW64 
    (where Windows 7 keeps its 32 bit system DLLs)
then the problem goes away.
This seems to indicate that somehow Office 2010 has a problem that causes it to search in the wrong folder for the Solver32.dll when another addin is loaded in between the original Solver32.XLAM at start up and the use of the Solver in the sheet (which eventually
requires this DLL to be loaded). Oddly, this only happens after a solution is found and "Keep Solver Solution" is selected - and I'm not sure why it's not looking for Solver32.dll any earlier.
This is not a problem with any earlier versions of Excel and I suspect is a bug in the Office14/LIBRARY/SOLVER implementation. Is there any way to get this followed up?
Thanks,
Andy

I'm facing the same issue. With an Excel VSTO add-in we're building. When the add-in is enabled the assembly solver32.dll can't be found. With our add-in disabled the DLL is resolved as (Sysinternals Process Monitor trace):
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\SysWOW64\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\system\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\Solver32.dll
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER\SOLVER32.DLL
and with our add-in enabled the following locations are tried, but solver32.dll won't be found:
excel.exe CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
excel.exe CreateFile
C:\ArcGIS\______path to our add-in install location_____________\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\system\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Program Files\Common Files\Microsoft Shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Program Files (x86)\Common Files\microsoft shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\wbem\Solver32.dll
etc...

Similar Messages

  • Problem with  whitespace  then loading and saving xml

    i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
    but then i do changes to the Textlayout it shows up like this --->
    Text in Container not modifed
    Text in Container modifed ---> with space beween the colorchanged string
    Text inContainersend and loaded ---> i think this has something to to with the
    TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
    can someone give me a hint...

    Hi,
    the link is --->
    http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
    its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
    Try it out:
    1.  change the text and
    2.  give a XML-Identifer
         and then send it to the server. --> send to server
    3.  type in the XML-Identifer you have used and
    4.   load it from the server ---> Load from Server Button
    evering works ok exept the columns formating.
    I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
    With best regards
    Michael Sprinzl
    --- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
    Von: robin.briggs <[email protected]>
    Betreff: Problem with  whitespace  then loading and saving xml
    An: "Michael sprinzl" <[email protected]>
    Datum: Donnerstag, 17. September 2009, 2:12
    Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
    Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
    - robin

  • Synchronization problem with BBr curve 9320 and outlook 2010

    Following the installation of office 2010 it's impossible to synchronize my BBR wth my PC; I get the message below:
    Thanks for your help.
    Message:
    Caught_com_error exception. description();(null); error(): 2147312566 (0x80029C4A);
    Errormessage(): erreur lors du chargement de la bibliothèque/DLL dy type; Source();(null)
    Solved!
    Go to Solution.

    Dychow wrote:
    I'm dylan from malaysia. I facing a problem! What the service about blackberry? I cannot find an contact to call blackberry customer service! Does Blackberry have office in malaysia?? My blackberry device 9320, always like burning (feeling hot), no matter i take off the battery and fix back, or i restart back the device, still the same question! And it kill my battery faster! WTF with this problem?
    Hi and Welcome to the Community!
    BlackBerry actually provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into BlackBerry at no charge to the end user. So your service/support path would start by checking your original purchase documentation and finding out what it tells you regarding how it works in your region -- it can vary by region as well as by specific issue. From what you describe, your's sounds like a device-level issue, which would therefore be either an authorized service center or your original place of purchase.
    There also might be some good reading here:
    http://us.blackberry.com/legal/handheld-limited-warranty.html
    If you remain unsure where to go, then I'd recommend you check with your original place of purchase or your mobile service provider for local guidance.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - Try the remaining items of:
    iOS: Troubleshooting applications purchased from the App Store

  • I still am having problems with Aperture not loading,  It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

    I still am having problems with Aperture not loading,  It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

    Do you have Final Cut installed on your machine?
    If so, you may want to look at this article: http://support.apple.com/kb/TS3528
    Let us know if that helps.

  • Taskbar Jumplist anomalies for Word 2010 and Excel 2010

    I am having problems with missing jumplists for Office 2010 products (Word and Excel) pinned on the Windows 7 taskbar, **BUT** have no problems with jumplists for Notepad and IE pinned on the taskbar.
    Observation 1: I just upgraded from Office 2010 Starter to full Office 2010 by getting a product key. Full Office 2010 was installed on my laptop when I purchased it but only Starter was licensed. Full Office 2010 was unusable until the upgrade. I suspect
    the leapfrog from Starter to full Office 2010 might have a part in this jumplist issue.
    Observation 2: I can see from a DOS prompt that the AutomaticDestinations and CustomDestinations folders exist under Recent. However, from Windows Explorer I cannot see the 2 folders under Recent. (That may be a clue…if other people CAN see the 2 folders
    from Windows Explorer.)
    Observation 3: In DOS, I can see that both directories have files ending in -ms. I can also see updates (new files with fresh timestamps) from opening Word and Excel files in those 2 directories. It’s almost like Word and Excel don’t understand to go look
    in those 2 directories after the Office upgrade, even though Windows 7 (?) generates the -ms files for the jumplist function.
    Observation 4: Again, no problems with Notepad and IE jumplists. I can remove the files from the AutomaticDestinations folder and cause Notepad to have no jumplist items, and then restore them and Notepad has jumplist contents again.
    Observation 5:  I had no problem using jumplists with Word Starter and Excel Starter.  All references to Office/Word/Excel Starter are now gone from the Starter button and All Programs - sent to Recycle bin.  I deleted the Word Starter
    and Excel Starter entries when I upgraded, but I just deleted the Microsoft Office Starter (Englisgh) entry under All Programs today...I thought it was a benign entry and wouldn't hurt since I wasn't using it.  Maybe there's some corruption in registry
    as a result of the mixture.  Interestingly, I can drag a file created in Word Starter to the taskbar and it will try to pin it to the Word Starter taskbar "ghost" that's in the Recycle bin.
    Any clues anyone?  I have no large files in the two destination folders, and have only about 20 files total in each folder...far fewer than the 999 threshhold mentioned in one of the updates for Office 2010.
    Thank you!

    I encountered exactly the same problem, and under exactly the same circumstances as the original poster (upgraded from Office Starter to Home and Business; jump lists worked fine in Starter, then stopped working for Excel and Word after upgrading). 
    Like the original poster, none of the various fixes found online corrected the problem, nor did re-installing Office.
    I also tried what was suggested by Max Meng and created a new User Account. The problem occurred for the new account, just as it did with the old one.
    After about 6 hours of fighting, I have finally solved the problem.  The solution is not easy, fast or pretty.
    What I did was uninstall Office (again) using the Control Panel. Then I ran a FixIt utility found here:
    http://support.microsoft.com/kb/290301 (method 2)
    My hope was that this would do additional registry clean-up.  I knew from earlier attempts that this alone would not fix the problem, though.
    Despite uninstalling twice, there were still a lot of references left in the registry to "Word Starter" and "Excel Starter".  Likewise, there were still references to "WINWORDC.EXE" and "EXCELC.EXE", which are the starter versions of the executables.
    So I went through the registry using RegEdit, and manually deleted every key which included those strings.  The largest number of cases were file type definitions for various Word and Excel file extensions.  When in doubt, I deleted entire tag
    hierarchies for Word and Office file types, figuring that they would be restored when I reinstalled Office.  In the process, I removed pretty much every reference to Word or Excel that I could find in the registry.
    I also deleted any directory on my hard drive (in c:\Program Files(x86), c:\Program Data, and c:\Users\<name>\AppData which appeared to be related to Office.
    Having done this, I reinstalled again, and the jump lists for Word and Excel now work.
    In debugging the problem, I found that .automaticDestination-ms files (which contain the data behind the jump lists) were not being created when I opened Word or Excel documents; they *were* being created when I manually pinned individual files to the
    taskbar, however. 
    I suspect that this might be due to the long hexadecimal filename being based on a hash of the application name, or what the system thinks is the application name based on the file type.  Removing the references to "Word Starter" and "Excel Starter",
    and the corresponding WINWORDC.EXE and EXCELC.EXE in the registry might have cleared up this problem.
    Obviously this fix is potentially risky, and should only be attempted if you are comfortable editing the registry. Making a full system backup beforehand would be a wise precaution.  For this specific case, however (broken jump lists after
    upgrading from Starter to full Office) it would appear the only alternative is a clean install of Windows (to wipe the registry completely).

  • Essbase Add-in and Excel 2010

    Hi All,
    I have a user who has just had Windows 7 and excel 2010 installed and is able to connect to Essbase through the add-in but when he tries to retrieve data it completely crashes his excel which shuts down immediately.
    As far as I have read the add-in does not support 2010 64-bit but I have win7 and excel 2010 and do not have the same problem and I am to retrieve data with no issues. We both have the 32-bit version of 2010 so I'm not sure why his excel is shutting down.
    We are on 11.1.1.3 of Essbase
    Any pointers or experiences you can give are appreciated
    Thanks
    Luke

    Is there any other addin installed on this machine, if yes try the retrieval after disabling that addin.
    If not
    Try un-install and re-install of Essbase Excel Addin

  • Performance issues when using Smart View and Excel 2010

    Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
    It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
    Any advice / tips on how to optimise the performance would be greatly appreciated.
    Thanks,
    Nick

    Hi Nick,
    Office 2010 (32 bit) only is supported.
    Also check these documents:
    Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
    Smart View Refresh Returns Zeros (Doc ID 758892.1)
    Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
    Thank you,
    Charles Babu J
    Edited by: CJX on Nov 15, 2011 12:21 PM

  • Problems with Cocoon 2.03 and Weblogic 6.1 SP3

    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did occur
    when you unpacked the war, but I believed that these problems did not occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would be greatly
    appreciated.
    Thanks in advance.
    Paul

    This how I got Cocoon 2.04 up and running on WLS 6.1.4
    Download the Cocoon source from http://xml.apache.org/cocoon/dist/
    Remove all but the following JARs from lib/optional:
    commons-jxpath-1.0.jar
    jing-20020724.jar
    resolver-20020130.jar
    servlet_2_2.jar
    commons-logging-1.0.jar
    jtidy-04aug2000r7-dev.jar
    rhino-1.5r3.jar
    xt-19991105.jar
    Update lib/jars.xml to reflect these changes
    Issue build commands:
    ./build.sh clean (Note: Always clean first!)
    ./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
    -Dexclude.webapp.javadocs=yes webapp
    Copy the following JARs to your WLS instance’s lib directory:
    xercesImpl-2.0.0.jar
    xml-apis.jar
    xalan-2.3.1.jar
    xt-19991105.jar
    java/lib/tools.jar
    Sample of config/SERVER_NAME.setenv
    LIB=/path/to/lib
    JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
    JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
    JAVA_HOME=/opt/java1.3
    Deploy the resluting cocoon.war and you should have a Cocoon up and running that
    can do the XML->HTML Hello World sample. The status page works fine too.
    My advice is to launch this stripped configuration first and if needed add more
    features later by adding the JARs of your choice to the class path (or add the
    to your webapp-build if you are confident that WLS are capable of handling their
    manifests).
    Good luck
    /Peter
    "Paul Petley" <[email protected]> wrote:
    >
    >
    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
    to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory:
    org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and
    try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
    '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did
    occur
    when you unpacked the war, but I believed that these problems did not
    occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would
    be greatly
    appreciated.
    Thanks in advance.
    Paul

  • Problems with MSI K8N-Neo3 and Command Queing.

    I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
    Key system components for the two computers:
    AMD Sempron 3000+
    MSI K8N-Neo3
    1 GB Kingston PC3200 DDR-SDRAM
    MSI GeForce 6600GT or MSI GeForce 6600LE graphics
    Maxtor 120 GB SATA disk (6L120M0)
    Sony DVD-RW drive
    Anyway, I wanna say thanks for the quick answers...

    Thats not what I read (assuming this is the same correct model)
    420W double unit
    DC O/P Load Max
    +5V 42 Amp.
    +12V 16 Amp.
    +3.3V 28 Amp.
    -5V 0.5 Amp.
    -12V 0.8 Amp.
    +5VSB 2 Amp.
    Agreed that one is 420W, but is that it or not?

  • Problem with java swing button and loop

    Problem with java swing button and loop
    I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
    I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
    When I click on start button it must do next:
    Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
    And when I click on stop button it must do next:
    Start button must set enabled and selected and Stop button must set disenabled.
    Field status is set to 0.
    This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
    There is java code, so you can get better picture:
    /** start button */
    public void gStart_ActionEvents() {
    try {
    ivjGStart.setEnabled(false);
    ivjGStop.setEnabled(true);
    ivjGStop.setSelected(true);
    getJTextPane1().setText("Program is running ...");
    Status = 1;
    } catch (Exception e) {}
    /** stop button */
    public void gStop_ActionEvents() {
    try {
    ivjGStart.setEnabled(true);
    ivjGStart.setSelected(true);
    ivjGStop.setEnabled(false);
    getJTextPane1().setText("Program is NOT running ...");
    Status = 0;
    } catch (Exception e) {
    /** procedure IzvajajNeprekinjeno() */
    public void IzvajajNeprekinjeno() {  //RunLoop
    try {
    int zamik = 2000; //delay
    do {
    Thread.sleep(zamik);
    PreberiDat(); //procedure
    } while (Status == 1);
    } catch (Exception e) {
    So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
    Any help will be appreciated.
    Best regards,
    Tomi

    This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
    Since java is task-based this will happen if you do like this:
    1. Button "Start" is pressed. Thread running: GUI_Thread
    2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
    3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
    4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
    5. Call PreberiDat(). Thread running: GUI_Thread
    6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
    Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
    What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
    http://java.sun.com/docs/books/tutorial/uiswing/index.html
    This tutorial explains how to build a multi threaded gui.
    /Lime

  • IE11 Problem with Windows 8.1 and IIS 8.5

    I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website  hosted on the local machine. The problem occurs with both
    the desktop version of IE11 and the Windows 8 metro style version.
    When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
    to Windows 8.1 exhibit the same fault.
    The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
    It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
    Can anyone help me? Assitance with this problem would be most appreciated. 

    Description
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    </dir>
    Problem signature
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Problem Event Name: APPCRASH
    Application Name: IEXPLORE.EXE
    Application Version: 11.0.9600.16384
    Application Timestamp: 52157231
    Fault Module Name: MSHTML.dll
    Fault Module Version: 11.0.9600.16432
    Fault Module Timestamp: 52620354
    Exception Code: c0000005
    Exception Offset: 002964a7
    OS Version: 6.3.9600.2.0.0.256.48
    Locale ID: 2057
    Additional Information 1: ab90
    Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
    Additional Information 3: d486
    Additional Information 4: d48664e52db6f0b0676e13c96e422192
    </dir>
    Extra information about the problem
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
    </dir>

  • I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

    I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

    Hey floridiansue,
    Do you have an installed email program such as Microsoft Outlook?  If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Problem with module lazy loading in flex 3

    Hi every body!
    I have some problems with Module lazy loading. I am using flex 3.5, Module-flex3-0.14, parsley 3.2.
    I can't get the LazyModuleLoadPolicy working correctly.
    In my main application (the one that loads the modules), my parsley context is the following:
            <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ OpenViewMessage }" />
         <cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }"/>
         <cairngorm:ParsleyModuleDescriptor objectId="test"
              url="TestModule.swf"
              applicationDomain="{ClassInfo.currentDomain}"
         />
    And to load my module:
    [Inject(id="test")]
    [Bindable] public var test:IModuleManager;
    <core:LazyModulePod
         id="moduleLoader"
         moduleManager="{test}"
         moduleId="testModule"
    />
    with  LazyModulePod.mxml:
    <mx:Canvas
        xmlns:mx="http://www.adobe.com/2006/mxml"
        xmlns:module="com.adobe.cairngorm.module.*"
        xmlns:parsley="http://www.spicefactory.org/parsley">
        <mx:Script>
            <![CDATA[
                import com.adobe.cairngorm.module.ILoadPolicy;
                import com.adobe.cairngorm.module.IModuleManager;
                [Bindable]
                public var moduleId:String;
                [Bindable]
                public var moduleManager:IModuleManager;
                [Bindable]
                [Inject(id="lazyLoadPolicy")]
                public var lazyLoadPolicy:ILoadPolicy;
            ]]>
        </mx:Script>
        <parsley:Configure/>
        <module:ViewLoader id="moduleLoader"
            moduleId="{ moduleId }"
            moduleManager="{ moduleManager }"
            loadPolicy="{lazyLoadPolicy}">
             <!--<module:loadPolicy>
                  <module:BasicLoadPolicy/>
             </module:loadPolicy>-->
        </module:ViewLoader>
    </mx:Canvas>
    OpenViewMessage.as in a swc:
    public class OpenViewMessage
            private var _moduleId:String;
            private var _viewId:String;
            public function OpenViewMessage(moduleId:String, viewId:String)
                this._moduleId = moduleId;
                this._viewId = viewId;
            public function get viewId():String{
                return _viewId;
            [ModuleId]
            public function get moduleId():String
                return _moduleId;
    In another flex project, my module context is:
    <mx:Object
         xmlns:mx="http://www.adobe.com/2006/mxml"
         xmlns:controler="com.cegedim.myit.controler.*">
         <controler:WindowControler/>
    </mx:Object>
    The module implements IParsleyModule
    <mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
         implements="com.adobe.cairngorm.module.IParsleyModule"
         xmlns:spicefactory="http://www.spicefactory.org/parsley">
         <mx:Script>
              <![CDATA[
                   import org.spicefactory.parsley.flex.FlexContextBuilder;
                   import com.adobe.cairngorm.module.IParsleyModule;
                   public function get contextBuilder():ContextBuilderTag
                    return contextBuilderTag;
              ]]>
         </mx:Script>
         <spicefactory:ContextBuilder  id="contextBuilderTag" config="{ MyITTestModuleContext }"/>
         <spicefactory:Configure/>
    </mx:Module>
    and the WindowControler:
    public class WindowControler
         public function WindowControler(){}
         [Init]
            public function initialize():void
                Alert.show("Module Initialized");
            [MessageHandler(scope="local")]
            public function openViewMessageHandler(message:OpenViewMessage):void
                Alert.show("Opening view " + message.viewId + " in the module " + message.moduleId);
    If i uncomment the basicLoadPolicy in LazyModulePod.mxml and remove the lazyModuleLoadPolicy, everything works fine. The module is loaded when it's added to stage and it receives correctly messages dispatched to it. But with the lazy policy the module never loads.
    I may have missed something or there is somthing i don't understand because i tried the ModuleTest provided in example in cairngorm sources. It works fine (i mean loading the moduleA2 when receiving a message), but if i replace the change the lazyModulePolicy to listen to broadcasted messages instead of a pingMessage, the module never loads too.
        <cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ BroadcastMessage }" />
        <cairngorm:ModuleMessageInterceptor
            type="{ BroadcastMessage }" moduleRef="moduleA" />
    public class BroadcastMessage
        public function BroadcastMessage()
    If someone has any clue, i'll be happy to test it =)
    Thanks.

    Hello, back on my issue, i tested a little bit more the message dispaching.
    I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
    So i added copy of my module:
         <cairngorm:ParsleyModuleDescriptor objectId="test"
              url="TestModule.swf"
              applicationDomain="{ClassInfo.currentDomain}"
         />
         <cairngorm:ParsleyModuleDescriptor objectId="testbis"
              url="TestModuleBis.swf"
              applicationDomain="{ClassInfo.currentDomain}"
         />     
    Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
    I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
    <cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
    and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
    I compiled with
    -keep-as3-metadata+=ModuleId
    but this hasn't changed anything...

  • I'm having problems with CS2 (mainly illustrator and photoshop

    I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
    Please Help!

    CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
    The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
    May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
    How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
    Third party software Illustrator Repair Kit also must be good solution
    It has free demo version at:- http://www.illustrator.repair/
    Hope this will be helpful.

Maybe you are looking for

  • Problems with Printing a PDF of DWG with details as raster refernces???...

    So, I'm trying to print a detail sheet that has a few client details refenced as raster images among our own details. Made a PDF using Adobe PDF. Unfortunately, when printing the PDF of this sheet, somehow the raster details get scaled down and a hug

  • Format changing when exporting to Numbers on Mac

    I export to itunes for use in Numbers 09 for Mac. The file opens ok, but my legal sized page is reverted to a letter sized page; sometimes other formatting is changed as well. Please fix.

  • Straming video doesnt work.

    Streaming video doesnt work. Video in Skype is OK. Play locally stored video OK in MediaPlayer as well as iTunes. Downloaded Adobe Flash and Shockwave. Still no steraming after restart of PC. Firefox is upgraded. Windows XP home

  • User Exit for delivery Date Update in ME41

    Hi, I want to Create one User Exit which will Update the Delivery Date of All Line Items ,same as of Item one. Detail : When creating RFQ using tcode ME41, create with Reference to PR, add your collective Number and copy few line items from your PR,

  • TreeTable with grid

    I am using the tree table and when i try to add a grid to the table the grid is not shown on the tree column. If i try to paint a border for each node at the tree it gets too wide (since for close cells there are two borders.) Is there any other solu