Problem with some outgoing mail accounts
I have several pop accounts in Mail. On my home iMac, they use my ISP for outgoing. For example, one account is arizona.edu for incoming; it uses smtp.comcast.net for outgoing. This has worked perfectly for years. Suddenly last week, the outgoing mail stopped working.
The dialog box says the server has rejected the sender address. The only way I can send the message is to edit it, changing the "from" address to my mac.com address.
There's nothing new on my system. No software changes. When this happened, I tried re-entering my account info in Preferences, but no joy. Any ideas?
Thanks!
Hi,
Thanks for chipping in.
This is what I do.
1.Enable IMAP in Gamil settings
2. In iphone setup the mail by using Gmail option.
3. I enter the user name, pswd et
4. I save and it verifies the account
Now if I go to home screen and checks the mail account details again, the pswd field is blank again.
I have set up my yahoo account and it works perfectly well.
Hope the above info helps foryou to understand the issue and help me out.
Thanks,
Alex
Similar Messages
-
Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!
Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com
-
Problems sending mail: some problem with the outgoing mail server SMTP?
I can't send e mails: some problem with the outgoing mail server SMTP?
I had this same problem with both my imac and mac book pro using hotmail via mac mail with bt as my internet provider. Suddenly 4 months ago out of nowhere i could receive emails but could not send them. I scoured all the threads followed all the fixes none of them worked. However I just phoned apple support and fixed it in a matter of minutes. I am SO happy. This is what the technician advised me:
Go to your apple icon and scroll down to system preferences. Then dependant on what machine you have it is different for my imac and mac book pro click on either air port/wifi then the advanced tab in the bottom right hand corner. Then click on the DNS tab. Hit the + sign on the left hand side and type in 8.8.8.8 then hit the + sign again on the left hand side it will create a new line underneathe and type 8.8.4.4 then hit okay on the bottom right and then hit apply, again on the bottom right. Then send a test email to check but it should be fixed.
Had to share this. Its been driving me mad for months. -
Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?
Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
- Greg -
Problems with multiple e-mail accounts on Droid 2 & also can't put phone into Silent mode
I just received my Droid 2 and having a problems with having multiple e-mail accounts.
My original droid worked fine with all of this.
I have 2 different personal e-mail accounts setup.
When I click e-mail, it just defaults to the default e-mail address and I have no way of switching accounts. I have to change the default e-mail account in order to view the other account.
Along with having a shortcut on the home page to each e-mail account, it always just goes to the default one and no way of adding a shortcut to both.
When I did this on the original droid, i could choose which e-mail account I wanted a shortcut for and could obviously have both on the home screen.
I also have found no way to NAME the accounts, ex. Comcast & Work.
That way I could distinguish the difference between the 2 on my home screen even if I could get a shortcut to both.
not sure how this could be overlooked but I sure dont think there is a way to make this happen.
Also, what is with 2.2 System and not allowing you to put it in silent mode?
I updated my original Droid to 2.2 and could no longer make it silent with the volume button on side or going into the sound settings and changing it to silent, it would always stay on vibrate.
And now it does the same thing with Droid 2. I cant make it silent at all.
Any ideas on either issuebecker800 wrote:
ok I got the silent problem fixed.
The update changed vibrate to be always, even when on Silent mode.
The e-mail problem however is stll an issue and I realy hope they release an update to fix this.
I'm sure I'm not the only one with 2 e-mail accounts on their droid.
I never had an original Droid, so I can;t compare to what was on that. For me, I am using the "Messaging" app - it seems to be set up for multiple e-mail accounts better than the email app. Messaging is the one recommended by the manufacturer - give that a try. -
How do I fix my iPod touch's problem with hotmail outgoing mail server?
I have just received a new replacement iPod touch 8Gb.
On my old model I used the house wifi network to connect to HOTMAIL in the mail app it would set the account up immediately and work perfectly.
This time, when I tried to set the account up I had a long delay while it verified account details. Then after opting to set up account without using SSL an account was generated with an error message to say I may not be able to send or receive mail.
Incoming mail is OK, outgoing is not working.
The error message told me that I needed to configure my outgoing mail server.
My default outgoing server is set to smtp.live.com and works on port 587.
I have an additional server set to 'on', which is also smtp.live.com working on port 465, which was set up when I tried to alter the port number on the default server. Still no outgoing mail.
Any suggestions?Followed your instructions and again, account verification failed using SSL.
I chose to create without SSL and got the following message:
'The SMTP server 'smtp.live.com' is not responding'. I accepted the details,
the email Inbox populated, and everything looks normal.
Same error is occuring:
'Connection to outgoing server 'smtp.live.com' failed. Additional outgoing mail servers can be configured in settings>mail,contacts and calendars'
The settings are as follows:
Incoming mail server
Host Name: pop3.live.com
username: is correct
password: is correct
Outgoing SMTP:
Primary server
host name: smtp.live.com
username: is correct
password: is correct (has been re-entered just in case)
Use SSL: OFF
Authentication: password
server port 587
I have duplicate SMTP servers listed under 'Other SMTP servers' with exactly the same details as above so it seems as if the iPod is retaining some settings even after I delete account.
Also, I wonder if there is anything I need to get the network administrator to do, because he did ask for the Wi-Fi address of my previous iPod touch could it just be a case of allowing it as a specific device on our network? -
STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.
I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionIntervalHi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK? -
Problems with my Yahoo-mail account.
I cannot send mails anymore with the Mac Mail, although I still receive mails! If I log in into Yahoo-homepage directly via Safari, everything's working fine. Can anybody help me, please?
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Problem with an e-mail account
Good afternoon,
I need help.
I bought N78 few days ago.
But I cannot receive my e-mails there. The situatiion is following:
When I put email address in the phone and I complete the settings, I try to connect. Unfortunately I cannot connect because above mentioned e-mail address is cut and it appears without "com" at the end.
I tried another address - [email protected] The problem is the same but in this case only "m" is cut.
I tried with [email protected] and it works without problem.
Can somebody advise me whether there are any restictions about the number of the letters of the e-mail address?
Thank you in advance for your help.
Best Regards from sunny Bulgaria
Dimiter
Message Edited by celandine on 21-May-2009 07:59 PMWhat happens when you try?
-
Outgoing messages not working with POP e-mail account
I am getting a strange message each time I try to send outgoing e-mail messages with my iPhone 3G. It says that my recipients e-mail address in invalid. I have tried multiple e-mail addresses and it always says the same thing when I try to send. My outgoing mail settings look like they are entered correctly and I am recieving e-mail just fine. Any suggestions?
Hi. I was having the same problem with my Gmail/Googlemail account, which i've just managed to fix, by changing the port number for my SMTP server, as per Google's suggestion.
Specifically, I changed my SMTP port number to 465.
Link to relevant Google help page can be found here -
https://mail.google.com/support/bin/static.py?page=troubleshooter.cs&problem=bug flow&selected=bugflow_imap07
Hope this helps some of you. -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last weekSorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use. -
Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?
Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.
-
iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.
If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.
-
List of Problems with new Web Mail
List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.
Maybe you are looking for
-
I upgraded my system yesterday after going for a month or two without updates and a ton of authentication-related stuff broke. Here are some of the issues/symptoms I'm currently experiencing: Seeing this message in journalctl: May 22 13:13:50 deepspa
-
Address Book won't import local area code
I'm trying to export my contact info from Palm Desktop to Address Book. Everything works fine, expect that AB doesn't import a contact's area code if it's my local area's code. In this case AB only imports a contact's 7 digit phone number. This isn't
-
Break implementation of Sales&Distribution FROM Production into phases
I have found this forum very helpful and responsive. Thanks for all the help. Due to the requirement of getting the ecommerce site up fast, is it possible to just implement: Sales Distribution side of business one 2007A APART From the Production MRP
-
Migrating EBS from 32-bit to 64-bit
Hi, I have a R12 Instance(12.1.3) with 11.1.0.7 database on 32-bit Linux. Now we are planning to do a clone of the existing R12 Instance to a newly created 64-bit Linux server. So i would like to know the steps involved in migrating the E-Business Su
-
RAC Install fails with "OCR upgrade failed with (-1073741819) on 10.2.0
I am trying to install RAC 10.2.0 with two Server 2003 R2 nodes connected to a fiber channel SAN. I have set up the shared storage, created the extended partitions, and setup the unformatted no drive letter volumes. Both servers see the unformatted v