Problem with some video files after upgrading to iPhoto'11 ...

Hi,
I just realized that after converting from iPhoto'09 to iPhoto'11, I found 176 small video files that don't play anymore. All problem files, can be found in iPhoto with a «.MOV» search. When played I get this error message (it's in French :
The problem is that I cannot find any file nested in my iPhoto Library corresponding to the iPhoto's info (name or size). I get no corresponding file. Also most of these «.MOV» files seem to have another file that plays and that is bigger. It could be the original file or maybe my real file ... As an example, one «.MOV» file is named MVI_6480Web and the original that works is named MVI_6480. Not all problem files as the Web suffixe though.
I did not pass all those 176 files one by one, so I am not sure what is the exact problem. I wonder if some of you can help me understand what is going on ?
Regards.

dalrmi wrote:
I can't believe this! I bought an upgrade to have new functionalities and what I'm having is a
limitation ?
you bought an upgrade to a separate application. i'm sure the iLife'11 manuals don't state a guarantee of compatibility with any appletv?
i'm not saying this is definitely the cause, but in the past there has usually been a requirement for an update when new iLife products were released.
Is it so unlikely to have an upgrade of ATV 1stG ?
the original appletv has been replaced and as such i doubt there will be any more software updates at all.

Similar Messages

[Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

Hi everyone,
since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
I have no clue how to fix this. Any help would be much appreciated!
Greetings,
Oliver
Last edited by okraits (2014-08-08 06:33:09)

lolilolicon wrote:
How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
If you simply use `startx`, the actual process running will be something like
/usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
Edit
In my log there's something yours are missing
[ 45.465] (++) using VT number 1
[ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
I login at tty1 (which is the first one visible after boot) and run startx from there.
I added the following to my .xinitrc:
echo "vt: $XDG_VTNR"
The output was:
vt: 1
That would be ok, right? Or is it $XDG_VTNR + 1?
So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
Last edited by okraits (2014-08-07 12:37:17)

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Problem viewing some video files

I get this problem only with some video files, not all. They are all .mov files so it's hard to tell what is causing it. What it looks like is that the video and sound plays but the video is "barred out" with thick white stripes so it looks like three is only 1 pixel size width of video showing through. almost like this:
"menu bar here"
Just pretend with the dotted lines, you can see the video in it's place. I tried reinstalling quicktime but it does not work. Any ideas

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

Problems with some PDF files

Hi,
I have problems with some PDF files. After clicking on link to the file Safari shows me insted of normal document (which is working on Windows) hashes, numbers etc like it was a problem with coding or something. First I was using Preview, I though that maybe installing Acrobat Reader with plugins will solve the problem, but ofcourse it didn't. Did somebody has this same problem?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete -app Safari WebKitOmitPDFSupport
Copy the selected text to the Clipboard by pressing the key combination command-C.
Quit Safari. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered. You can then quit Terminal. Test.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

Problem with some Video Content not able to be shown. no Plug in for it

I am getting a Problem with some News Sites Articles Video Content not being able to be shown, BBC, YAHOO,etc I am getting the message/has content of Mime type Audio/x -pn-RealAudio-Plug in Because you dont have plug in for this mime type it cant be displayed. Also I am getting a Message Url not Valid
Help Please. Thanking You
I .Mac 17 Mac OS X (10.4.8) intel core 2 duo

Did you install Real Player (free version)?
<https://order.real.com/pt/order.html?country=US&langu
age=EN&mppi=0&mppos_list=0&mpst=0&ppath=cpmacpl060204a
&pageregion=playerbutton&pcode=rn&opage=realhomespma
cbb&src=realhome_spmac_bb_0_1_1_0_0_20>
Okay, so here's a question from a new to mac guy. Many issues on old PC with real player and Media Player not getting along. Eventually had to delete real player and had to reinstall windows. I would like to avoid third party software if possible and stick with Quicktime. How do I install the mime plug in without installing Real Player?
17" iMac Mac OS X (10.4.8) intel duo
17" iMac Mac OS X (10.4.8) intel duo

Problems with my second monitor after upgrading to Mountain Lion

Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
Have anyone experienced the same problem?!

Hello Carlo!
Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

Problems with your internet connection after upgrading to iOS 7.1.2

After upgrading to iOS 7.1.2 on my iPad Retina display does not connect to the internet more. Recognizes the Wi-Fi network but can not connect to the internet. The same thing happened to my wife's iPhone 5s, while my had no problems ...

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with wireless mouse/keyboard after upgrade to snow leopard

Hi!
I am wondering if someone has some insight for me. I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years. I am now having problems with them irratically.
1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left. This does not happen in Word.
2. When in boxes with dropdown options, only occasionally does that happen. The dropdown either doesn't show, or it flashes quickly. Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
3. When I use my function key or mouse to display all windows, I can't choose the one I want. Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
5. For a while, my left mouse button wouldn't work. I reconfigured it, that seems to have done the trick.
6. Today, I can't open any of the menu items on Firefox. I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded. Thanks in advance for any help!
Donna

Update all your third party software or uninstall and reinstall 10.6 versions.
If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
http://roaringapps.com/apps:table
IMO save for a new 10.8 machine after this summer.
See #1-15 here, tune yourself up good.
 Step by Step to fix your Mac

Dashboard widget with streaming video breaks after upgrade to Mountain Lion

Hi. I recently upgraded from Snow Leopard to Mountain Lion. Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera. When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg".
After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge. After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too. (I did make sure that, where needed, the username/password for accessing the video are included in the URL.)
I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up. So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
Thanks,
Chris

Hi James
I have exactly the same problem with the same "Loading clip" then blank. I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done. By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this. I never had a streaming video while I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion. I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu". Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
Have you come any closer in your research?
I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
trelements

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

An odd "kind" problem with some m4a files

I have 610 m4a files that iTunes thinks are mpeg-4 video files, while the Finder clearly shows that they're audio files. I only discovered this recently when I got my first video iPod, and went to sync my usual playlist of songs. In the first moments of the sync, I received an error message that stated that some of the video files I was trying to sync weren't compatible with my video iPod. This was a shock, as I hadn't yet selected any video files to sync. I tracked all the files down and found that they all shared the same problem. I've looked at them with a few extra info utilities and nothing seems out of the ordinary. I'm wondering if this is just a bug with iTunes? If it is, it wasn't fixed with 7.0.1,
I even went so far as creating a new user account, setting up a fresh (and empty iTunes) and adding a few of the files in question. Same problem...iTunes thinks it's a video file, yet the Finder thinks it's a audio file (which it is!). This seems to rule out iTunes library corruption and points the finger more at the file.
I went ahead and removed all of these files from my library and they're sitting in limbo in a folder on my desktop. Any tips? Anyone else having similar problems?
Screen cap below if you're interested...
http://s90153983.onlinehome.us/m4a_problem.gif

bump. no ideas? thanks!

Problem with some video files after upgrading to iPhoto'11 ...

Similar Messages

Maybe you are looking for