Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

Similar Messages

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • HT1926 I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

    I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

    What do you see instead of video, bobby? A green screen, pretty colors, something else?

  • I have ipad 4 with ios7 and cannot take videos. can someone help please

    i have ipad 4 with ios7 and cannot take videos. can someone help please

    Try sliding the words left or right to select as opposed to tapping them.

  • I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    Also, if you can't get them to work, what is the error message you are getting?
    Baron Samedi

  • Dsp module with sound and vibration

    Is possible to be employed with Sound and Vibration at the DSP module??
    Thank you

    Sorry,
    it's not possible to use Sound and Vibration functions with DSP. But here you can find a list of all the function you can use in DSP enviroment:
    http://www.ni.com/pdf/products/us/2005_5416_821_101_D.pdf
    Clara
    AE Manager
    NI Italy

  • Usage of DAQ USB-6211 with Sound and Vibration Measuremen​t Suite

    Hi,
    Could I use DAQ USB-6211 with Sound and Vibration Measurement Suite ? All examples are based on 24-bit devices (usually with IEPE-on) such as NI 9234 or similar.
    I don't need IEPE, 16 bit is sufficient for my dynamic range, could leave without simultaneous sampling - so 6211 (that I have) is OK for me.
    Actually I'm interested in S&V Toolkit ( or Measurement Suite) as a tool with some specific Signal processing capabilities (for example, short-time FFT etc.)
    Thanks in advance

    Hi sgabr,
    Yes, you can use the 6211 with some of the Sound and Vibration VIs, including most of the FFT functions.  I know that's a little vague -- I don't have a list of which functions do or do not support 16-bit devices, but I did test it out on my system this afternoon.  If there are specific functions or examples you'd like to know about, let me know, and I will try them out.
    You also have the option to download the evaluation version of the Sound and Vibration Measurement Suite.  That way, you can test drive it yourself!
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • Why is my airportxpr only working with Itunes and not with another music program

    why is my airportxpr only working with Itunes and not with another music program??
    I can not select/see other outputs in my sound selector.

    You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
    for Windows - http://rogueamoeba.com/airfoil/windows/
    for Mac - http://rogueamoeba.com/airfoil/mac/

  • Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flashplayer.  With the Reader, I was able to find a different install

    Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flash player.  With the Reader, I was able to find a different installation link using the troubleshooting guide.  I cannot find the same with flash player.  Please tell me how to install Flash player because there is a website that I cannot even view without it.  BTW That is annoying that I cannot even see the website without flash player
    my system is XP

    Use these installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player for Mac OS X
    For Adobe Reader go to http://get.adobe.com/reader/enterprise/

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

  • Matrix with CFL and RecordSet with DoQuery

    Hello Experts,
                            How to use Matrix with CFL and RecordSet with DoQuery

    Hi Manish,
    Refer to SDK sample on CFL at ...\SAP\SAP Business One SDK\Samples\COM UI\VB.NET\17.ChooseFromList
    Go to SDK Help, Developer's Guide -> DI DPI -> Reference -> Overview -> Objects -> Recordset
    see the Example "Recordset Operations sample" at the bottom of the page
    HTH
    Aravind

  • Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    As far as I know, Apple sells no such configuration.  However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
    Hope that helps.

  • How do I delete sites created with iWeb and posted with .mac after a format

    I am confused about how to delete a couple of sites that I created with iWeb and posted with my .mac after I did a format reload?
    I have tried everything. The original files are not on my MacBook Pro because of the format.
    I also see them in my idisc, but I is my understanding that on my MacBook Pro that I can delete the files, but they are hosted online. On the online idisk I cannot delete them because there is no option. Please help!!!

    Using the file menu in Finder:
    Go/iDisk/My iDisk/Web/Sites/iWeb/YourSitesAreHere
    Highlight selected files and Command/Delete. You will receive a drop down asking you if you are sure; click OK and the files/sites will be deleted immediately from the iDisk.
    Mark

  • If I get the iphone 5 with plan and contract with 2 years or 3 can i pay $25 each mouth for just ulimited texting and 250 min of talking.

    If I get the iphone 5 with plan and contract with 2 years or 3 can i pay $25 each mouth for just ulimited texting and 250 min of talking.

    Ask the carrier instead of making yourself look like a fool by posting such a question in a user to user technical support forum.

Maybe you are looking for