Problem with space between rendered items in a list component
Hi,
Thanks again for taking your time to read my newbie posts. I found (and prove) over the internet that I can set some space between rendered items of a list based component using paddingTop and padding Bottom (vertical space), so I asume that I can do the same thing with paddingLeft and paddingRight. But as a matter of fact, it didn't work, why? that's what I would like to know, and how can I solve this. I would really apreciate if you help me do this.
Thanks again
Sebastián Toro O.
Yeah, it is inconsistent. The renderer has to implement paddingLeft/Right.
It was done this way for performance reasons. The Spark List in Flex 4 is
more consistent.
Similar Messages
-
Need help with space between bullet and text in list
I've been trying to increase the space between my bullet and text in my list. Everytime I increase the margin-left or padding everything moves to the right but the space between the bullet and text stays the same. Would someone help me figure out what I'm doing wrong. Website is located here. http://www.webassistantsllc.com/clients/sport
Thanks
LynneThanks for the help. That worked perfectly.
Another question on my bullet:
Is there a way to adjust the position of my bullet in a list? http://www.webassistantsllc.com/clients/sport
Thanks
Lynne -
Problem with spaces between objects
Hi, this is a basic yet perplexing issue for me. I created a
table 3 rows, 3 columns, and inserted images into different cells.
In DW, it looks like the images are right next together, but when I
preview in IE or Firefox, you can see a space in between the
images. I set border to 0 and tried playing with the image sizes,
but I can't get the images to appear side by side without a gap
when viewed in browser. What can I do to correct this
problem?<table border="0" cellspacing="0" cellpadding="0">
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:f0e6p6$s73$[email protected]..
>I Dream ofWeaver wrote:
>> Hi, this is a basic yet perplexing issue for me. I
created a table 3
>> rows, 3 columns, and inserted images into different
cells. In DW, it
>> looks like the images are right next together, but
when I preview in IE
>> or Firefox, you can see a space in between the
images. I set border to 0
>> and tried playing with the image sizes, but I can't
get the images to
>> appear side by side without a gap when viewed in
browser. What can I do
>> to correct this problem?
>>
>
> what about the cellspacing and cellpadding for your
table?
>
> <table border=0 cellspacing=0 cellpadding=0>
>
> that should do it.
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
>
> An Ingenious WebSite Builder:
http://sitelander.com -
DW CS5.5 in OSX Lion - anyone seeing problems with Spaces?
DW seems to have problems with Spaces in OSX Lion.Switching into DW from other spaces is not 'clean'. When DW comes up, sometimes the Code/Design is blank white, and windows within the workspace don't show their headers. Clicking on Code/Design redraws that window, but the only thing that seems to recover the window headings is switching to and then back from another app in the same Space.
Seems like screen redrawing triggered by switching apps within the same Space is a little different than that triggered by switching apps across Spaces.
Anyone else seeing this?I did report it as a bug, using the link kindly provided by you and Shocker.
The two Macs I've tried this on now are a Mac Pro and an iMac, so there's no Automatic Graphics Switching option to enable/disable.
I was only able to check this out on the iMac late last night.
Hardware synopsis:
Mac Pro Early 2009
Processor 2 x 2.93 GHz Quad-Core Intel Xeon
Memory 16 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Software Mac OS X Lion 10.7 (11A511)
The iMac isn't available to me at the moment, I'll have to fill in missing details later (can't remember the exact graphics card info):
DW is CS5, not CS5.5, was also installed well ahead of the Lion upgrade
Computer is iMac instead of Mac Pro, about 1.5 years old
Quad-Core i7
4GB memory
Mac OS X Lion 10.7
I used the same procedure upgrading to Lion on the iMac...
Ran Cocktail 'Pilot' to clean up the system prior to install (runs Daily, Weekly, Monthly maintenance scripts, clears System, User, and Internet caches, repairs disk permissions on "Macintosh HD", clears log files)
OS10.7 was purchased through the Mac App Store and installed.
JRE installed.
DW on the iMac exhibited the same problem as on the Mac Pro.
To reproduce:
Start DW, open a file for editing
Start any other app in the same Space
Open a new Space, open any other app there.
Test switching between DW and other apps in the same Space compared with switching between DW and other apps in different Spaces.
Consistently, when I switch between DW and other apps in the same Space, DW's windows/panels redraw properly,
and when I switch between DW and other apps in different Spaces, DW's windows/panels don't redraw properly. -
Problem with Spaces that started with Snow Leopard
I've noticed two problems with Spaces that have arrived since switching to Snow Leopard... First, if I am in say Space 1 where I use Safari and I then want to move over to an open application, say like Excel, that I have running in Space 4, there are a number of ways to get there but one way I used to use all the time was to move down to the Dock and simply single click on the open Excel application and that would immediately switch me over to Space 4 and whatever Excel documents were already open there... Now, since switching to SL, a single click of whatever application in the Dock makes that application active in the Finder (you see its name appear in the upper left of the menu bar) but otherwise nothing happens... You then have to click a second time and then you switch over to Space 4... It's not really a double click because that implies to clicks closely spaced in time... For this, you can click once, leave the room, come back, click a second time and you will now switch to the alternate space where the open application is running... That is clearly different than it was under Leopard and I would suggest that it is a bug because there is no value in the outcome of that first click... It highlights the switched application but doesn't actually switch to it until you click a second time...
Second, and this one is worse, if you say launch Excel (which you want to open in Space 4) while you are in Space 1, Excel will open and switch over to Space 4... So far so good... But now, with Excel open over in Space 4, if you are now back and working in Space 1 and while there you use the Finder to go to some other, currently unopened, Excel file and request that it open, it should switch over to Space 4 and open that file but instead it opens it wherever you are, in the case mentioned here, in Space 1... So now you have Excel files opened both in Spaces 1 and 4... Clearly a bug... Spaces had some similar issues in a few early versions of Leopard but they eventually got it working... Now it appears Spaces has regressed somewhat in SL... I love spaces and use it all the time... Hope it gets fixed soon... thanks... bob...Hi... I have since learned that the first paragraph of my original post where I say,
"I've noticed two problems with Spaces that have arrived since switching to Snow Leopard... First, if I am in say Space 1 where I use Safari and I then want to move over to an open application, say like Excel, that I have running in Space 4, there are a number of ways to get there but one way I used to use all the time was to move down to the Dock and simply single click on the open Excel application and that would immediately switch me over to Space 4 and whatever Excel documents were already open there... Now, since switching to SL, a single click of whatever application in the Dock makes that application active in the Finder (you see its name appear in the upper left of the menu bar) but otherwise nothing happens... You then have to click a second time and then you switch over to Space 4... It's not really a double click because that implies to clicks closely spaced in time... For this, you can click once, leave the room, come back, click a second time and you will now switch to the alternate space where the open application is running... That is clearly different than it was under Leopard and I would suggest that it is a bug because there is no value in the outcome of that first click... It highlights the switched application but doesn't actually switch to it until you click a second time... "
...that turned out to be my mistake... In another post someone pointed out that in Spaces preferences you must have checked ON the preference that says,
"When switching to an application, switch to a space with open windows for the application"...
I had been playing with a number of things trying to figure out what was going on and somewhere in the mix had switched that off... (It is on on all my other computers and I'm sure it originally was on this one too)... When I switched it back on the above described problem went away... So that was my fault...
But the second part,
"Second, and this one is worse, if you say launch Excel (which you want to open in Space 4) while you are in Space 1, Excel will open and switch over to Space 4... So far so good... But now, with Excel open over in Space 4, if you are now back and working in Space 1 and while there you use the Finder to go to some other, currently unopened, Excel file and request that it open, it should switch over to Space 4 and open that file but instead it opens it wherever you are, in the case mentioned here, in Space 1... So now you have Excel files opened both in Spaces 1 and 4... Clearly a bug... "
...is a real problem... I fired up my G4 (power pc) that runs Leopard, 10.5.8, to see whether it behaves the above way or not and it does NOT... It works as one would expect.. So at least later in Leopard, the above mentioned problem was not present but it is in this first incarnation of Snow Leopard...
To me, the utility of Spaces is all about keeping a single desktop from being cluttered with many open applications/files and to now have an application that opens in whatever space you happen to be in after it is first opened in its "correct" space sort of defeats the idea behind Spaces... I am currently trying to train myself to first hit <command><4> (my Excel space) before opening a second or subsequent Excel document to prevent it from opening somewhere where I don't want it to be...
Again, I hope Apple sees and fixes this... I did submit an "Apple feedback" item for this issue... thanks... bob.. -
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .
HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1 5804
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Secondary AP Image Size
ap801 4964
c1100 3036
--More or (q)uit current module or <ctrl-z> to abort
c1130 4884
c1140 4492
c1200 3316
c1240 4712
c1250 5064
c1310 3084
c1520 5244
c3201 4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
KNOWLOGY_DC01 disabled -
KNOWLOGY_DC02 disabled -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01 disabled -
KN1252_AP02 disabled -
Anham_AP03 disabled -
ANHAM_AP01 disabled -
ANHAM_AP04 disabled -
ANHAM_AP02 disabled -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID Interface Network Admission Control Radio Policy
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
7 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
5 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
9 knowlogy_ogr Disabled None
10 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 11
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 44
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 118
WLAN 1 :........................................ 111
WLAN 2 :........................................ 111
WLAN 4 :........................................ 112
WLAN 6 :........................................ 112
WLAN 7 :........................................ 111
WLAN 9 :........................................ 112
WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 7
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:df:a5:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 ..........Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane. -
How to get rid of an extra space between news items in news module
My home page is www.turbocam.com. Notice on the left side that there is an extra space between news item 1 and 2. Between news item 2 and 3 the spacing is normal. I haven't touched the template. Any thoughts as to why this is occuring? The module is listed as:
{module_announcement,l,3}
Thanks.
Liz Dorsett
TurbocamNever mind! I figured it out. I had break tags outside the div tag!
-
How can I select an item from a list component with a seperate button
This is a repost, I decided it'd probably be better here than
in the general discussion board. I will try to delete the other
one.
Hello Everyone,
This is my first post here. I am trying to figure out how to
select an item within a list component with a button. This button
is calling a function. I have searched for the past 3 hours online
and I can't find anything about it. I thought perhaps I could set
the selectedItem parameter, but that is read only, and I believe it
returns an object reference rather than something like a number so
even if i could set it, it would be pointless. I also found a get
focus button, thought that may lead me somewhere, but I think that
is for setting which component has focus currently as far as typing
in and things like that. I am lost.
Basically I am looking for a way to type this
myList.setSelected(5); where 5 is the 5th item in the list.
Any help would be much appreciated.Never mind found it. It is the property called selectedIndex
and it is writable -
I'm using the following code inside a table tag within a loop to generate a multi-row printable form
htp.p('<td cellspacing="0" align="right" width="100%" style="font-size:8pt">'||HTMLDB_ITEM.TEXT(p_idx=>2,p_size=>1)||'</td>');
I'm still getting gaps between rows.
How do I control the space between each row ? I want each text item row packed up like a spreadsheet with no gaps between rows. Although not shown (border="0") there is the enclosing table cell for each field, so what I want is no cellspacing and maximized item height within each cell.
But with the above code I'm getting...
etc.
but I want
Anyone know how to do this?
regards
Paul PHi Chris , how's it goin'...
thanks for the response. I know how to control a table cell area's height but it's the height of the inner textitem that I'm having trouble with. When I turn on border="1" There's not much space left between cells, just the default width of a line. I just don't know how to expand the height of the text item. The CSS code you suggested, where do I put the code and how do I apply it?
Here is the guts of the PLSQL report code
for des_rec in des_cur loop
htp.p('<table height="100%" width="95%"border="0">');
htp.p('<tr>');
htp.p('<td style="font-size:8pt;font-family:Arial" width="80%" nowrap >'||
des_rec.DES_SERVICE_DESC||'</td>');
htp.p('<td cellspacing="0" align="right" width="5%" style="font-size:8pt">'||
HTMLDB_ITEM.TEXT(p_idx=>2,p_size=>1)||'</td>');
htp.p('<td cellspacing="0" align="left" width="5%" style="font-size:8pt">'||
HTMLDB_ITEM.TEXT(p_idx=>3,p_size=>1)||'</td>');
htp.p('</tr>');
htp.p('</table>');
end loop;
regards
Paul P -
Problems with spaces in directory or file names and Word.exe
Hi
I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names.
I have this
String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path;
try {
Runtime.getRuntime().exec(cmd);
} catch (Exception errorea){ }
Here is what happens:
if path is something like this: "c:\people\info.doc" , there's no problem, Word opens the document, but if path contains blank spaces somewhere, it doesn't work. For example:
path = "c:\Documents and Settings\info.doc"
path = "c:\Hi everybody\info.doc"
path = "c:\tests\test results.doc"
with the above examples it doesn't work :( Word tries to open "c:\Documents", "c:\Hi" or "c:\tests\test".
Can anyone help? thanx a lot ! : )No, the exec method runs the Word.weird, it shouldn't, and it wouldn't on my system going by the test I just made, but I'm running linux & not windows, maybe the command line parsing is different for some reason.
The problem is that
Word starts and then Word says that it can't open the
file because the name or the path to the file is not
valid.You still should use the overload that takes a String array. -
Problems with spaces in file or directory names and Word.exe
Hi
I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names.
I have this
String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path;
try {
Runtime.getRuntime().exec(cmd);
} catch (Exception errorea){ }
Here is what happens:
if path is something like this: "c:\people\info.doc" , there's no problem, Word opens the document, but if path contains blank spaces somewhere, it doesn't work. For example:
path = "c:\Documents and Settings\info.doc"
path = "c:\Hi everybody\info.doc"
path = "c:\tests\test results.doc"
with the above examples it doesn't work :( Word tries to open "c:\Documents", "c:\Hi" or "c:\tests\test".
Can anyone help? thanx a lot ! : )Hint: use the variant Runtime.exec(String[] args).
Create a command array, with each token in a separate argument. The entire filename with spaces goes into one argument. -
[SOLVED] problem with spaces and ls command in bash script
I am going mad with a bash script I am trying to finish. The ls command is driving me mad with spaces in path names. This is the portion of my script that is giving me trouble:
HOMEDIR="/home/panos/Web Site"
for file in $(find "$HOMEDIR" -type f)
do
if [ "$(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)")" -gt 30 ];
then echo -e "File $file is $(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)") old\r" >> /home/panos/scripts/temp;
fi
done
The dateDiff() function is defined earlier and the script works fine when I change the HOMEDIR variable to a path where there are no spaces in directory and file names. I have isolated the problem to the ls command, so a simpler code sample that also doesn't work correctly with path names with spaces is this:
#!/bin/bash
HOMEDIR="/home/panos/test dir"
for file in $(find "$HOMEDIR" -type f)
do
ls -lh "$file"
done
TIA
Last edited by panosk (2009-11-08 21:55:31)oops, brain fart. *flushes with embarrassment*
-- Edit --
BTW, for this kind of thing, I usually do something like:
find "$HOMEDIR" -type f | while read file ; do something with "$file" ; done
Or put those in an array:
IFS=$'\n' ; files=($(find "$HOMEDIR" -type f)) ; unset IFS
for file in "${files[@]}" ; do something with "$file" ; done
The later method is useful when elements of "${files[@]}" will be used multiple times across the script.
Last edited by lolilolicon (2009-11-09 08:13:07) -
Problem with status-button in item view of ME21/22/23N
Hello ABAP,
i have to check for some conditions when a PO is saved, and due to those checks either save it or well, not.
This is working fine so far.
when you click check, or save, conditions get checked and window with errors pops up.
I´m using the normal error message procession used in SAPLMEGUI which i have to fill with thos three makros.
I just have one problem, my status button in item line doesnt get updated. i tried with a lot of metafields by now but it seems trial and error is not the way to go here.
any tips?requirement resolved.
solution follows:
DATA: lt_ytab TYPE TABLE OF ysdch_vbap_idnlf,
lt_data TYPE TABLE OF ymmch_check_idnlf_out, "added ID (TYPE INT4) Field to structure
lt_out TYPE TABLE OF char80.
DATA: ls_ytab TYPE ysdch_vbap_idnlf,
ls_mska TYPE mska,
ls_data TYPE ymmch_check_idnlf_out,
ls_out TYPE char80,
lv_row_end TYPE i VALUE 10.
CONSTANTS: lc_col_start TYPE i VALUE 10,
lc_col_end TYPE i VALUE 40,
lc_row_start TYPE i VALUE 10,
lc_title TYPE char80 VALUE
'Fehler, noch Bestand zu Liquidations/Annulationsaufträgen vorhanden'.
*~~~Get header data
ls_head = im_header->get_data( ).
*~~~Get item data
lt_items = im_header->get_items( ).
LOOP AT lt_items INTO lr_item.
ls_item = lr_item-item->get_data( ). "EKPO
"select liquidations/annulations orders for supplier material nr.
SELECT *
FROM ysdch_vbap_idnlf
INTO TABLE lt_ytab
WHERE /fis/idnlf = ls_item-idnlf.
LOOP AT lt_ytab INTO ls_ytab.
"now lets see which of those orders has order stock
SELECT SINGLE kalab kaspe
FROM mska
INTO CORRESPONDING FIELDS OF ls_mska
WHERE vbeln = ls_ytab-vbeln
AND posnr = ls_ytab-posnr.
IF ls_mska-kalab GT 0 OR ls_mska-kaspe GT 0.
ls_data-vbeln = ls_ytab-vbeln.
ls_data-posnr = ls_ytab-posnr.
ls_data-/fis/idnlf = ls_item-idnlf.
ls_data-kalab = ls_mska-kalab.
ls_data-kaspe = ls_mska-kaspe.
ls_data-meins = ls_item-meins.
ls_data-ebelp = ls_item-ebelp.
ls_data-id = ls_item-id. "saved ID for later processing
APPEND ls_data TO lt_data.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
ENDLOOP. " lt_item
IF NOT lt_data IS INITIAL.
"we got annulation/liquidation orders with order stock for this material
"so popup a error message
LOOP AT lt_data INTO ls_data.
IF NOT ls_data-vbeln IS INITIAL AND NOT ls_data-posnr IS INITIAL.
mmpur_business_obj_id ls_data-id. "using other makro now and making use of ID
"using mmpur_business_obj_id instead of mmpur_business_obj_it
ENDIF.
mmpur_metafield mmmfd_item_number.
mmpur_message 'W' 'YMMCH' '110' ls_data-vbeln ls_data-posnr ls_data-ebelp ' '.
ENDLOOP.
ch_failed = 'X'.
ENDIF.
Edited by: Florian Kemmer on Sep 7, 2010 3:22 PM -
Problem with spaces in filenames
Created a photo album in iPhoto and exported to iWeb. When I try to upload to my Comcast homepage, several graphics elements in the photo album page have spaces in their filenames and Comcast balks. Is there a way to keep iPhoto/iWeb from utilizing filenames with spaces in them? Thanks.
MacBook Pro Mac OS X (10.4.8)Hi Stanley...
I'm glad that you got your space problem fixed. If you ever update your site, though, you'll have to redo all of your hard work eliminating the spaces. Here's a little utility that will do this for you a little bit more automatically...
http://www.brokenropesoftware.com/iWebFTPUtility/iWebFTPUtility.html
Maybe you are looking for
-
Sound Blaster Extreme Music do not detect changes on the console
I'm using the sound blaster X-Fi XtremeMusic with Logitech Z-5500 and the Flexi Jack, connected on Digital mode (Using Coaxial and Optical). The OS? Is Windows Vista Ultimate 32 Bits. The problem at this moment is that I can not make any change on th
-
Sony xperia z1 shuts down while updating to 14.3.A.0.757
Hi I just got the xperia Z1 and im trying to update to 14.3.A.0.757 but while its peparing the phone shuts down, I tried doing what it says and nothing ( it tells you to hold the volume button down and reconnet the micro usb) I tried to hold the powe
-
Difference in supplier invoice Excise duty and po duty
Request your guidance for the below scenario. ie when we put a PO for vendor we will fix a tax code in po with ed cess and local tax.entire postings for tax is based on this tax code.now if the excise value in vendor invoice may differ from our PO ta
-
here is the requirement we have an SRM system and an ECC system, now approval for purchases occurs in ECC on purchase order level. but our client want all indirect purchase orders will be initiated from SRM in the form of shopping carts. shopping ca
-
Custom Table Attribute - How to handle the PropertyScriptElement
Hi All, I have a custom Table attribute that I'd like to process via snippets. I've added kCellObjectScriptElement to my ScriptProviderBoss and I can see the request coming in to my ScriptProvider. The trouble is, I need to extract the ITableModel an