Problem with specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ "

Noise will appear if specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ " showed on the web page.
No poroblem with Asian (CJK) charactor.
(symptom as below:)
https://www.facebook.com/photo.php?fbid=166744676837352
PC: Toshiba Satellite L365D
Video : ATI Mobility Radeon HD 5145

I've seen this before -- and I'm seeing it right now. I don't know whether there is a solution for end users. There might be a solution for webmasters (selecting a different font).

Similar Messages

  • Problem with specific idoc

    Hello
    i developped a flow between a BW sytstem to an EBD system via XI. in EBD the message should be integrated in a specific IDOC linked to a message and a MF.
    IDX1 and IDX2 are customized in XI
    In the receiver system partner profiles and distribution model are customized too.
    However,when i test i have a red flag in moni with this message  :
    <SAP:Code p1="Meta data EDISDEF for port SAPEBD, IDoc type ZIDOC_POTEST and CIM type not maintained" p2="" p3="" p4="">IDOC_ADAPTER.METADATA</SAP:Code>
    has someone got an idea please ?
    is it possible to use a specific idoc with xi ? 
    thanks in advance
    Cédric

    Nothing new for the moment... two weeks until next job...
    next monday 7h30 am oberkampf with jéjé
    if you want?

  • Problem with specific service

    Not sure where to post this but here's the issue I am seeing:
    I use iLok, a security/license dongle for (mainly) audio based applications. It worked fine previously in W10TP but since 10041 it stopped working. I noticed the service it runs is not starting, it tries to start every now and then when I watch
    it, but it then stops again and there is no way to start it manually.
    I obviously also reported this to PACE who sell the product and manage the service but I though I'd ask here as well. Does anyone know what changed in 10041 that might break a specific service?
    The USB dongle itself does not have to be plugged in for the service to work and while I run TP on my main PC, I tested this in a VM where it's fine until 10041 installs.

    Hi paulheu,
    According to your description, it should a compatibility issue with the latest preview build. To further confirm this issue, I recommend you contact the vender of the product. As this is not the final released version, so my suggestion is waiting for
    updates form both MSFT and PACE patiently.
    Thanks for your report and support.
    Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Problems with specific webpage

    I have a website page that will not work on my computer, but works on my husbands. It is a reading program that my son has used for several weeks with no problems on my macbook air. Now, it just sits on the log in page despite my attempt to login. I believe it is something with only my computer. I have cleared cookies and caches, updated adobe. I paid for this reading program and am very irritated it will not work on this computer. Please help me.

    Have you tried a different browser? eg, if you normally use Safari, try Firefox. Let me know if that works.
    Matt

  • 3.6.15 appears to have a problem with specificity. Selectors are being over-ridden by rules with much lower Specificity selectors. 3.6.14 was not doing this.

    I've just wasted at least a day's work chasing what appears to be a CSS bug that has cropped up in 3.6.15. Selectors with high Spec are being ignored in favour of selectors with much lower Spec.

    Here's an example.
    Here's my CSS for links in my menu div:
    .menu a:link,a:visited {
    color:white;
    display:block;
    width:120px;
    font-weight:bold;
    text-align:center;
    padding:2px;
    text-decoration:none;
    text-transform:uppercase;
    font-size:10px;
    margin:0 0 10px 0;
    .menu a:hover,a:active {
    background-color:white;
    color:black;
    And then for another div on the same page:
    .copy a:link,a:visited {
    text-decoration:underline;
    color:#C91313;
    .copy a:hover,a:active {
    text-decoration:underline;
    color:#7D0E0E;
    These divs do not overlap.
    It seems that links in each div have the styles that are unique to them, but the styles that are defined in both, but defined differently, are ignored. Example: Different colors are defined for links in each div, but Firefox 3.6.15 displays all links with the same color.

  • PS4 streaming problem with specific playlist

    So, spotify on my PS4 works beautifully using my phone as a control. It works for online playlists, and any playlist I make even from local files, except one in particular. It's a soundtrack from a video game called Planetside... I acquired it by downloading the game and grabbing the MP3 files. The odd part is, these songs play fine on my PC and even my android, but when I try to stream it through the PS4, it grays out. Does anyone have an idea what's going on here? Thanks in advance!

    Strugglechen wrote:
    or can convert my starred playlist to a normal Playlist with Name? https://community.spotify.com/t5/Help-Accounts-and-Subscriptions/How-do-I-go-to-someone-s-playlist-and-make-a-copy-of-theirs-as/td-p/559146 Found it ;)

  • Problem with specific song constantly repeating - What's going on?

    I'm not sure where to enquire on this issue so I've gone here.Most of my listening is putting my Starred playlist on shuffle...  But for some reason "Chocolate" by The 1975 seems to be coming up every 20 songs or so. (There's 13k tracks in the playlist so I thought there should be a good amount of variety).Does anyone know what this is? It gets seriously annoying after a while. Thank you anyone who is willing to help my ignorance! -SloeGin

    All other apps were working.  We fixed it by reverting to factory settings and starting over.  Thank you!

  • Re: All sorts of problems with BT Broadband

    Hi, I too am having lots of problems and wondered whether someone could help?
    We moved into our house recently. Its 15 years old and has had a BT line previously, however we still needed a new one installing apparently.
    Engineer came to do this saturday just gone but couldn't complete as some problems with exchange and the line not getting a dial tone etc.
    Someone came out Monday to try and fix this, said further problems.
    Someone came out Tuesday and finally said fixed. Got emails from BT saying line and broadband sorted.
    Came home - broadband very slow. Plugged into the main socket, several calls to BT, checked speed online, the stats are below.
    Despite it saying 7meg it is still very slow. Taking ages to download anything, simple pages on the internet take ages to load etc.
    Also did a test on speedtest.net and got quite different results. Have posted both results below.
    Getting very annoyed now as seems no1 can work out what the problem is, get transferred to BT tech help in india every night spending hours on end just for them to say they don't know what the problem is.
    No idea what to do next. Advice much appreciated.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    If you wish to discuss these results please contact your Broadband Service Provider.
    If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
    Your test has completed please close this window to exit the performance tester.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    If you wish to discuss these results please contact your Broadband Service Provider.
    If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
    Your test has completed please close this window to exit the performance tester.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    If you wish to discuss these results please contact your Broadband Service Provider.
    If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
    Your test has completed please close this window to exit the performance tester.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    If you wish to discuss these results please contact your Broadband Service Provider.
    If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
    Your test has completed please close this window to exit the performance tester.
    1. Best Effort Test:  -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    0.25 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    If you wish to discuss these results please contact your Broadband Service Provider.
    If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
    Your test has completed please close this window to exit the performance tester.
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:57:28
    Downstream:
    6.656 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.9 dB / 29.0 dB
    Line attenuation (Down/Up):
    41.1 dB / 21.0 dB
    Output power (Down/Up):
    19.9 dBm / 12.0 dBm
    FEC Events (Down/Up):
    31043 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    1 / 0

    Hi again,
    Having now waited a total of 15 days since the line went active, these are the stats.  We did briefly get up to 5mb but it has dropped again. The router has not been touched, turned off or played with at all for over a week now. This is still not achieving the max it is capable of, any ideas?
    Many thanks in advance
    1. Best Effort Test:  -provides background information.
    Download  Speed
    2.65 Mbps
    0 Mbps
    7.15 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 2.65 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :4.42 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 3.5 Mbps
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    3 days, 12:43:18
    Downstream:
    4.313 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    13.0 dB / 29.0 dB
    Line attenuation (Down/Up):
    41.6 dB / 21.0 dB
    Output power (Down/Up):
    19.5 dBm / 12.1 dBm
    FEC Events (Down/Up):
    4978107 / 597
    CRC Events (Down/Up):
    5258 / 410
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    95194 / 391
    Error Seconds (Local/Remote):
    977 / 275

  • Problems with illustrator CS4 and win 7 64 bit pencil and bruch tools

    I just bought a computer with Windows 7 64 bit version. Whenever I use the Pencil tool and the brush tool, I can't see my lines as I draw them, only after I  draw. Also sometimes the first item I draw disappears, and lines will sometimes be randomly broken, with pieces missing.
    Is anyone else experiencing this? And have you found a way to get around it?
    I tried changing the compatability mode for the program to work for Windows XP, but that hasn't helped.

    I tried changing the compatability mode for the program to work for Windows XP, but that hasn't helped.
    Nor should it. Issues such as you describe them are usually graphics driver issues or problems with specific input devices such as tablets which compatibility modes can't fix, as they use the same drivers. So what is it you are using on that end?
    Mylenium

  • Problems with Display/Screen

    I have a I-Touch 2G. The content in display not properly rotating from Landscape to Portrait. This cause me a lot of problems with games, music, photos, and many applications. I reset the i-touch two times and still with the same issue. How can I fix it?

    Hey HuMbErT1,
    Is this a problem with a few specific photos and games or all content?
    If its a problem with specific content you may have to sync it to the iPod touch again.
    If this is a problem with all content, try to restore the iPod touch as described here: http://docs.info.apple.com/article.html?artnum=305744
    If the restore does not take care of the problem, it may need hardware repair.
    Just make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    You can also request repair online here: https://selfsolve.apple.com/GetWarranty.do
    -Jason

  • Problem with roaming for specific apps

    Hi :)
    I have a problem with my iPhone 4s:
    When i use roaming on my iPhone 4s i try to save some money by turning off roaming for specific apps, but one day for ca. 3 weeks ago it stopped working!
    Some apps can use roaming but some can't ;(
    There are like 10 apps always turned on, but if i try turning roaming off for an app that is on already it wont work!
    If i close settings and reopen it, the app is now denied using roaming!
    If i try allowing an app it changes but still wont work and after some time it gets in the same possission i cant change!
    I have never experienced this before and i could't find an answer on google ;(
    If you know how to fix it please respond to me here :)
    ~somonekilledme
    P.S: Im really sorry if there are bad english here, but im mot english sooooo..... yeah

    You are on the right track suspecting DHCP conflicts.
    To configure your "roaming network" connect your "slave" Extreme to your main Internet router - either directly or through a switch - and place it in "bridge mode". That will work.
    A router will be distributing IP addresses using DHCP. Anything connected to it should be configured as a bridge, the essential difference being that a bridge does not distribute IP addresses.
    I do not believe your "slave" Extreme will function connected as it is to the "main" Extreme, but may work if you assign it a static IP address. It is not unusual for it to retain this static IP after having been changed to DHCP if its lease is still valid.
    The OK article you referenced must be terribly outdated if it is referring to AirPort Admin Utility. That has not been used in about a decade. Read this one:
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    Unfortunately its screenshots refer to AirPort Utility 5.6, which has been replaced with the prettier, though less useful 6.2.

  • In the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

    in the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

    I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

    My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
    I wouldn't recommend running programs for long time (few days) on this OS.
    This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
    Zvezdana S.

  • Specific problem with trackpad

    I have this specific problem with my trackpad, it doesnt work this 2 functions:  Swipe between pages and scroll direction: natural.
    all other functions are working.
    i don't know what to do .

    Hello, Gonzalo andres. 
    Thank you for visiting Apple Support Communities. 
    I had an issue with this after upgrading to OS X 10.9.  I would verify that the gestures have been configured in System Preferences > Trackpad > Scroll & Zoom/More Gestures. 
    OS X Mavericks: Change keyboard, mouse, and trackpad settings
    http://support.apple.com/kb/PH14317
    OS X Mavericks: Change the way your trackpad works
    http://support.apple.com/kb/PH13804
    Cheers,
    Jason H. 

  • Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

    Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
    Just started happening yesterday.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Do you see any prefs related to that <b>knoxnews<i></i>.com</b> site on the <b>about:config</b> page if you enter that URL in the Filter?
    *http://kb.mozillazine.org/about:config
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

Maybe you are looking for