Problem with spit view in DW CS3

When working in DW CS3 split view.
Whilst working in one view the other view used to update and
highlight automatically in DW8. For example when working in design
view the changes would be highlighted in code view as you work,
however this does not work in CS3. Is this a bug
Has anyone else come across this problem?

Thanks for the replies!
Although I still haven't found the real problem for it, the preview panel keeps on freezing, I do have a wokaround found for it.
Because I have a docking station for my laptop, with some free slots in it, I bought a second hand Video Card with 512MB and better performance than the on-board card in the laptop.
I hooked up a external LCD monitor to it and now it works just fine, with no additional modifications in Bridge.
So, although the Bridge / video card still occurs on the laptop, I don't mind working this way.
Maybe a newer driver in the future will solve this problem.
Kind regards,
Stefan

Similar Messages

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

Problem with creating/viewing PDF's from InDesign CS3

I have a problem with our PDF workflow and just cannot seem to resolve it.
The problem is as follows: My coworker and I (both designers running CS3 on iMac's running 10.5.6 Leopard) work daily on producing documents and graphic layouts.
Internally we can view and print PDF documents we create just fine with no troubles with the exception of our supervisor, who is running a mac with Tiger operating system. Our office environment is both Mac and PC. On may occasions he cannot print PDF's we create. Many times his prints will contain garbled characters, drop italics and formatting, replace fonts, or just print slowly.
This problem is also happening to our editor who is offsite. This is a fairly serious problem for her, considering her job relies heavily on being able to view and open PDF files we create. She was able to send a PDF file which shows the garbled mess her printer spit out when she printed. Apparently there were pages upon pages of messy garbled text. When documents do print from her, they are usually very slow in printing, taking up to a minute or more to print each page.
The sample of what she sent me is attached, and can also be found on my MobileMe iDisk at: http://public.me.com/rlcollier (document entitled Print Results.PDF)
My question really to the community is obviously what might be causing these problems. Its very frustrating not being able to determine if its something we're doing ourselves thats causing some incompatability or corruption in these files, or if its the users systems themselves. I can say that Debra our editor has can have a garbled mess of a 4 page file from us, and then turn around and print a graphic heavy 90 page PDF with ease from Boeing. Our PDF's seem to be the only ones she struggles with. That being said, my inclination is that its something on our end.
Any ideas of where to start looking? Any help at all would be greatly appreciated and welcomed. Thanks!

I currently had our editor test printing of some of our files using both Foxit and Adobe Reader (as was suggested) in order to see if either made a difference in her printing ability and here is what she came back with:
I tried to print out both these pdfs (David's is the one you reworked and Lisa's HESSM-3, both sent yesterday).
With Adobe: David's first page printed quickly, but it had errors (part of his pants didn't print, and there's an arbitrary shaded box in the text). Page 2 didn't print--every time I tried it had a different "offending command" code. Printing Lisa's HESSM made it up to page 7 before problems showed up (stock photo only partially printed), and it stopped on page 8 (with the random "offending command" code).
With Foxit: Both David's and the HESSM pdfs printed completely and without error...but it took a long time. David's 2 pages took about 3 to 4 minutes, and HESSM's 16 pages took close to 20 minutes. The time is in the transfer of data to the printer; the physical printing goes pretty quickly.
I cant say that I believe email is the problem, although I cant rule it out. I've tested emailing vs. passing through our workgroup with my supervisor, and it does not make any difference in his ability (or lack of ability) to print our files. He was able to print to a different printer (an HP 4650 as opposed to a 4100) without troubles. He refuses to believe its a printer problem however because PDF files originating from our office are the only ones he has trouble with. Never has he had any trouble with a single PDF file produced from any other source. This is also the case for our editor who only has trouble with PDF files originating from either mine, or my coworkers systems.
PS: I've attached both files that were referenced by our editor above for viewing/testing.

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem With Image View After Cropping

Hi All,
I have a problem when I try to crop an image in CS4. The crop tool works perfectly, however sometime the cropped image has parts of the image “out of line” I believe the problem is just with the view, not the actual file. I have saved the image and opened it in MS Picture Viewer and the image is perfect.
I was using Windows XP without a problem. I have only experienced this since I upgraded to windows 7 64 bit.
Below is a screen shot of the problem, not the bottom right of the image. Any suggestions please.
Thanks - Vicki

No, it was me. Feel free to review the thread history at this URL if you'd like: http://forums.adobe.com/message/4206899
Your display driver IS out of date. You really don't want the one from Microsoft's WHQL
If you would like to be able to use the OpenGL-specific features, listed on the page below, as well as not have display corruption, I recommend you update SPECIFICALLY to Catalyst 11.7 (which carries driver version 8.872). Anything up to 11.12 is probably okay, but 12.1 has some very specific problems with Photoshop. Several of us on the forum here have had particularly good, solid results from 11.7.
http://kb2.adobe.com/cps/405/kb405745.html
-Noel

HST60: Huge Performance Problem with VAPI Views

We are using a VAPI view (with instead-of-triggers) for a table with +/- 60 columns.
In this instead-of-trigger we call some functions to return constants and variables.
Using DML (for example a Update) on this view takes the Server 80 sec. CPU time.
Direct update on the table takes 0.2 secs. CPU time.
Assistance please cause we are planning to use VAPI views to populate a new database model with old Forms.
As I know in Oracle 7 there was a problem with code in triggers. I believe they were compiled each time they were called. And package onces !! MAybe has this something to do with it.
Thanks in advise,
M. Overdijk
null

Marc,
Thanks for the reply....
We are using 8.1.6 currently.
This is a problem of one my fellow developers. The problem is the update using the rowid. Headstart has a booster to customize a Designer module to not use this rowid.
Problem we have is we have a old Forms 4.5 application. We made a new server model along with cdm ruleframe. The old tables are dropped and the old forms now work with VAPI views......redericting the data the new tables.
Now we have (we think) the same problem wherefor Headstart has this above called booster.
Any solutions for us ??? Cause we don't want to change the old application forms (there are to much !!)
Our solution is to drop the instead of triggers and use some cev business rule to redirect the data...
Disadvantages:
1. some work to do
2. whern the old application is dropped we have to remove the cev rules.
Any other solutions

Problem with Mega View 561

I'm Italian. Sorry for my english; I hope to be comprensible.
I've just got a Mega View 561, but I had a problem with it.
Now it don't start anymore.
In the manual I read that there should be a restore CD-ROM in the package supplied with the Mega View, but i didn't find it.
I also didn't find a mail address able to connect directly the support in MSI, also in the Internet site.
Could someone help me in some way?
Thanks a lot

Bongiorno,
Try and look if what you need is here.
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=604&kind=6
If not:
[email protected]

Problem with Live View being slow

Since the latest update it now takes up to 20 seconds for the live view to appear in Dreamweaver. Is this usual - anyone else having this problem, How can I solve it? it's like working in mud!

It may just be a temporary issue on their server. That's one of the main problems with referencing files you don't own, you are at the mercy of the owner's server status.
If you can, I would suggest getting a copy of the font files you are using and keeping them on your own server to reference instead, it may cost you extra, but it's worth it.
To be honest, I've never used Typekit and don't even know if that's possible, but I've had similar issues with Google Fonts in the past and will download fonts to be stored on my own systems now whenever it's critical that they are available whenever the website is (doesn't happen often, but).
You just need both a .ttf and .otf version of the font to ensure it works when using the @font-face css rule. Converting a .ttf to .otf is pretty simple and can be done in a lot of places online. You would need to check with Typekit's user agreements to see if that's possible, but Google's are all open source and can be modified however you see fit.

Cache problem with "videos" viewed by thumbnail ?

Hello,
When I add video clips to my iTunes library, I have to crite the name of the author, the album... but sometimes display in the video view seems not to refresh : the clip are still listed without albums. I added clips 4 days ago, it refreshed immediately. I added clips three days ago, it still has not refreshed. I added clips two days ago, it took one day to refresh.
I tried changing view, changing album name, nothing work.

This is due to a bug in Flash Player 9.0.115.0, released on
12/3/07.
Techsmith, the company that produces Camtasia, reported the
problem to Adobe a few months ago, but Adobe has not released an
update for it. Adobe suggested downgrading to an older version of
Flash Player, but older versions of Flash Player have security
vulnerabilities that could result in your computer being attacked.
Incidentally, Player 9.0.115.0 is classified as a "critical update"
by Adobe.
Techsmith has released a patcher to fix affected Camtasia
videos, but the fix must be applied to the files on the server (all
of the Camtasia files) and can't be used by viewers. The problem
with Player 9.0.115.0 affects more than just Camtasia videos, of
course.
Until a newer version of Flash Player is released, you
probably just need to live with it unless you're willing to risk
the security holes in older Player versions. We're coming up on
three months since Player 9.0.115.0 was released. Given the long
delay in fixing the problem, and since Techsmith claims that Adobe
has made fixing the problem a high priority, it's possible Adobe's
engineers can't find a fix. Only time will tell.
For more information, search this forum for "Flash Player
& Camtasia Studio", "Player 9.0.115.0 MP3 issues", and "flash
player audio chirps and video delays". For confirmation of the
security flaws, search the web for "apsb07-20".

Problems with FCE viewing on TV monito

I've used an ADVC-300 converter for several years to monitor and edit my FCE canvas. But today I am not getting real movement on the TV monitor. Just bumpy stills as I click the mouse. I've checked all cables and everything is the same. So what's happening and how do I resolve the problem?

Hi
Free space on Start-Up (Mac OS) Hard Disk. How Much ?
Else read.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Problem with spit view in DW CS3

Similar Messages

Maybe you are looking for