Problem with spool

Hi,
I created a batch job,and scheduled it.now when i see th spool,now in the display  the coloumns are not in a straight line...the list header is one line,1,3,5 rows are in one straight line ,2,4,6...rows are in another straight line...can any one help me this...this is very urgent...i can send the screen shot if u give me the mail address...also i can see messages/values in the joblog...but i cant see the messages inthe spool....
thanks,
Challa.

Hi Challa,
You can't do much with that as it is SAP generated.
Regards,
Atish
Message was edited by:
        Atish Sarda

Similar Messages

  • SFTP MGET of large files fails - connection closed - problem with spool file

    I have a new SFTP job to get files from an FTP Server.  The files are large (80mg, 150mg).  I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time.  I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
    Is there a limit to how large an ftp file can be in Tidal?  How long an ftp job can run?
    The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
    In the log, the error is that the connection was closed.  I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
    Below is an excerpt from the log
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
    DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
    DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
    DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
    DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
    DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
    DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
    DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed:  (code=0)
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException:  [errorcode=0]
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 :    at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 :    at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

    I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal)  there may have been a tagent.ini setting that tweaks that but I can't find any details.
    We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

  • Problem with spool request generation in Dialog program

    Hi,
        To give the spool and print functionality in dialog program i have used the function module code like below -
    call function 'GET_PRINT_PARAMETERS'
          exporting
               mode                   = ' '
               in_parameters          = ls_pri_params
          importing
               out_parameters         = ls_pri_params
               valid                  = lv_valid
          exceptions
               archive_info_not_found = 1
               invalid_print_params   = 2
               invalid_archive_params = 3
               others                 = 4.
       IF lv_valid <> space AND sy-subrc = 0.
             SUBMIT (sy-repid)
                    USER SY-UNAME TO SAP-SPOOL
                    SPOOL   PARAMETERS ls_pri_params
                    WITHOUT SPOOL DYNPRO.
    But the problem is, if it is list then we can easily get the print function, since i am using the above code in the dialog program screen 9000, program is giving dump like....
    Incorrect program type with SUBMIT.                                                                               
    What happened?                                                                               
    The current ABAP/4 program "SAPMYXXXXXX" had to be terminated because              
    one of the statements could not be executed.                                                                               
    This is probably due to an error in the ABAP/4 program.                              
    You attempted to start a program not intended for this purpose.                      
    I know that i should not use submit statement for dialog program, but what is the solution for this.
    Thanks in advance..

    Did you check the F1 help of SUBMIT. if not give a try.Submit cannot be used on Module pool programs. it is used for Report(executable ) programs.

  • Problem with Spool requests

    Hello ,
    Some spool requests are completed with status "Completed(Problem)". When we check the output Request Logs find below things :
    Print request processing log
    The host spool is reporting errors
    This request may not have been printed. Status unknown
    Most important attributes of spool request
    Request number 43899
    When we checked we are getting printouts fine but still in status we are getting completed with problem in Red mark.
    Can anybody tell abt this confusing situation why we are getting status in sP01 like this.
    Thanks
    Anju

    Hi,
    What is your OS?
    File = /usr/sap/SID/SYS/DVEBMGS00/data.
    UNIX:-
    check the file system status whether it is full (100%)
    Then increase file system thorugh OS level.
    Windows:-
    Check your hard disk of file system.
    Regards,
    Srini Nookala

  • HP color laserjet 2600n windows 7 printer not installed problem with spooler.

    My computer will not recognize my printers. Nothing new was installed, just all of a sudden, they were gone . Have installed new drivers, and had a very knowledgeable person look at it-nothing. Very frustrating. Have a program  that has been on it from the beginning and now it won't work (quark). Don't know where to turn. Am doing a windows defender scan for viruses as we speak. Help!!!!!

    Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

  • Problem with spool file

    I have a written a hot backup script and I am having the following problem.
    In my script I do:
    dbms_output.put_line('alter system switch logfile;');
    dbms_output.put_line('archive log all;');
    dbms_output.put_line('!cp /oracle/u01/oradata/design/arch/*.dbf /oracle/u011/oradata/design/recovery/archive_bkup');
    dbms_output.put_line('!compress /oracle/u11/oradata/design/recovery/archive_bkup/*.dbf');
    I spool the above and in the spool file it shows up as
    alter system switch logfile;
    archive log all;
    !cp /oracle/u01/oradata/design/arch/*.dbf
    /oracle/u11/oradata/design/recovery/archive_bkup
    !compress /oracle/u11/oradata/design/recovery/archive_bkup/*.dbf
    alter database backup controlfile to trace;
    !cp /oracle/u01/oradata/design/arch/*.dbf
    /oracle/u11/oradata/design/recovery/archive_bkup
    This command fails as it shows up as 2 lines. How can I get in one line.
    Thanks.

    The reason that is happening is because your LINESIZE is set too low for this (probably 80).
    what you need to do is, do a SET LINESIZE 132 (or something larger, depending upon how big the
    entire line can be - up to 255 - limit of DBMS_OUTPUT.PUT_LINE) and then run the PL/SQL
    statements:
    SQL> set serveroutput on
    SQL> set linesize 132
    SQL> begin
      2  dbms_output.put_line('alter system switch logfile;');
      3  dbms_output.put_line('archive log all;');
      4  dbms_output.put_line('!cp /oracle/u01/oradata/design/arch/*.dbf /oracle/u011/oradata/design/recovery/archive_bkup');
      5  dbms_output.put_line('!compress /oracle/u11/oradata/design/recovery/archive_bkup/*.dbf');
      6
      7  end ;
      8  /
    alter system switch logfile;
    archive log all;
    !cp /oracle/u01/oradata/design/arch/*.dbf /oracle/u011/oradata/design/recovery/archive_bkup
    !compress /oracle/u11/oradata/design/recovery/archive_bkup/*.dbf
    PL/SQL procedure successfully completed.
    SQL>

  • Printer problem in Spool..

    Hi Experts,
                I have a problem with spool creation.After click on Print Icon i have given the printer name XX . but in the spool , I am seeing another printer name YY in Spool attributes. the name which is entered is not captured in spool attributes.Is the printer in spool attribute is a common one for all users? How to change the same?
    Regards,
    Sreeja

    hi,
    check in SPAD transaction which printer is default assigned..
    and try to remove default printer and execute what is picking..
    Prabhu

  • Problems With Data Alignment when spooling to a CSV file

    Dear members,
    I am spooling data to a csv file. My data contains 3 columns
    For example :
    col1 col2 col3
    USD,10000033020000000000000,-1144206.34
    The 2nd column is alphanumeric, it contains some rows which have only numbers and some which have numbers and alphabets.
    The 3rd column contains only numbers with positive or negative values.
    I am facing problem with alignment. when i open the spooled csv file then i find that the 3rd column is aligned to right .
    In the 2nd column, rows which have only numbers are right justified and rows which have alpha numeric data are left justified.
    I tried using the JUSTIFY function in sql plus but still it is not working for me.
    Can any body give your opinion on how to control the alignment in spooled csv files.
    Your responce is highly appreciated.
    Here is my code :
    WHENEVER SQLERROR CONTINUE
    SET TIMING off
    set feedback off
    set heading off
    set termout OFF
    set pagesize 0
    set linesize 200
    set verify off
    set trimspool ON
    SET NEWPAGE NONE
    col to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ALIAS CONCATENATED_SEGMENTS
    col CONCATENATED_SEGMENTS justify left
    col to_char(decode(glbal.currency_code,glsob.currency_code,
    (begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
    (begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq))) alias Total_Functional_Currency
    col Total_Functional_Currency justify left
    COlUMN V_INSTANCE NEW_VALUE V_inst noprint
    select trim(lower(instance_name)) V_INSTANCE
    from v$instance;
    column clogname new_value logname
    select '/d01/oracle/'|| '&&V_inst' ||'out/outbound/KEMET_BALANCE_FILE_EXTRACT' clogname from dual;
    spool &&logname..csv
    SELECT glsob.currency_code ||','||
    to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ||','||
    to_char(decode(glbal.currency_code,glsob.currency_code,
    (begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
    (begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)))
    from gl_balances glbal , gl_code_combinations glcd , gl_sets_of_books glsob
    where      period_name = '&1' /* Period Name */
    and      glbal.translated_flag IS NULL
    and      glbal.code_combination_id = glcd.code_combination_id
    and      glbal.set_of_books_id = glsob.set_of_books_id
    and      glbal.actual_flag = 'A'
    and      glsob.short_name in ('KEC-BOOKS' , 'KUE' , 'KEU','KEMS', 'KEAL' , 'KEAL-TW' , 'KEAL-SZ' , 'KEAM')
    and glcd.segment1 != '05'
    and decode(glbal.currency_code , glsob.currency_code , (begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr) ,
    (begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)) != 0
    and glbal.template_id IS NULL
    ORDER BY glcd.segment1 || glcd.segment2 || glcd.segment3 || glcd.segment4 || glcd.segment5 || glcd.segment6
    spool off
    SET TIMING on
    set termout on
    set feedback on
    set heading on
    set pagesize 35
    set linesize 100
    set echo on
    set verify on
    Thanks
    Sandeep

    i think you do not have to worry about your code when you say that the plain texts created are ok when opened on the notepad. it is on the excel that you will need some adjustments. not sure about this but you might want to read about the applying styles in the excel by going through it's help menu.

  • Problem with Printing from Spool

    Dear Experts,
                  I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
    Kindly solve my issue, this happen frequently.
    Thanks & Regards,
    Srinivas

    Dear Siva,
                   Everything is ok in SPAD. This happen for few process order for COPI transaction.
    Regards,
    Srini

  • Problem with large spool lists

    Hello everyone,
    we have the following problem with one of our printers. When we are trying to print larger lists (>30 pages) the spool shows an "unknown error" and only a few pages are printed out.
    We have the following setup. A Kyocera FS-9520DN printer with Device Type KYOAAB1C which is connected via saprouter connection and host spool access method U. The only error I get from the tracefile of the Spool WP is
    S Tue Feb 22 07:34:37 2011
    S  *** ERROR => cannot write to connection [rspoclpd.c   857]
    S  *** ERROR => Lost connection, control file not sent [rspoyunx.c   1754]
    T  new memory block 000000002B6D6CE0
    S  handle memory type is RSTSPROMMM
    and the SP01 error message
    Status:              Incorrect (Reason unknown)
    Job status:          Completed
    Area:                Unknown
    Error:               Reason unknown
    Last event:
    Message:             Processing completed by spool work process
    Any suggestions what might improve the situation? Thanks in advance
    Marco

    Hi,
    A direct connection to a remote printer is not recommended as per the SAP Note #64628.
    The best option is to define the printer locally on the SAP server with Access method L for Unix or Access Method C for windows. If you need to use remote Access Method U or S, you should use a print server in between the SAP system and the printers.
    Regards,
    Aidan

  • Problems with using Deskjet 3745 on 2-PC home network

    I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network connecting the PCs is on an ADSL router with to its own external Iomega network drive with a USB port.
    To make the printer usable on both PCs,
    I originally connected it to the Iomega USB port. But the port was effectively a 1-way connection only, so I could not  get a print-preview to see which form/profile the printer was using. So I junked that and...
     reverted to connecting the printer to one PC permanently and sharing it on the network. But the two PCs required different drivers which would not talk to each other, and the set-up simply would not work.
    Finally I went back to the straightforward method of plugging the printer into the USB port of whichever PC I needed to us it on. That worked fine for a while until the WIN 7
     print-preview started showing blank images (but printing correctly).
    print-spooling failed to cope with cancelled documents.
    I have had Deskjet Support's help in trying to sort this out, which including reinstalling the drivers on both PCs - several times! But I am still left with solution 3 giving problems with Win 7.
    Has anybody encountered a similar situation and found a satisfactory working solution?
    This question was solved.
    View Solution.

    Try the following: connect the printer to the XP machine and set the XP machine to share this on the network.  On the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the HP (not Hewlett-Packard) Deskjet 3740 series (LiDiL).
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Facing problem with logo in the PDF attachment when sending mail...

    hi friends,
    i'm facing problem with logo in the PDF attachment to the mail.
    my requirement:
    1. enter spool number and mail id in the selection screen.
    process:
    1. now the program will fetch the spool data and converts it to PDF.
    2. but when i'm trying to send mail with this PDF as attachment.
    when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
    can anyone help me how to resolve this issue...
    thanks in advance, murashali.

    hi dinakar, thanks for your mail...
    logo looks good in spool/script/smartform.
    even it look good when i download this spool to pdf and to the presentation server as pdf file.
    i'm using CONVERT_OTFSPOOLJOB_2_PDF.
    when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
    here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
    code:
    Transfer the 132-long strings to 255-long strings
      lt_mtab_pdf[] = pdf[].
      LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
        TRANSLATE lwa_mtab_pdf USING ' ~'.
        CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
        CLEAR lwa_mtab_pdf.
      ENDLOOP.
      TRANSLATE lv_gd_buffer USING '~ '.
      DO.
        lwa_mess_att = lv_gd_buffer.
        APPEND lwa_mess_att TO lt_mess_att.
        CLEAR lwa_mess_att.
        SHIFT lv_gd_buffer LEFT BY 255 PLACES.
        IF lv_gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    NOTE: problem i believe is with ''.  i'm getting this tilt symbol () in my pdf internal table.  here in the above code the line   TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space.  so my logo is getting disturbed.
    even i tried with REPLACE this tilt with other char, but it doent work.
    can you give any idea...

  • I am having a problem with IRM Desktop version 11.1.54.2 Midware 11.1.1.6.0

    Hi everyone,
    I am experiencing some serious and strange problems with our IRM desktop client which Works with Java SE 6.30 (JRE 6U30). When I installed them (java and IRM) on Windows 8 Professional, IRM stops print spooler service, and block our clients to print anyting, and add a new printer by clicking ADD PRINTER button under Devices and Printer section. This is the visible face of the issue. However, I believe it affects more than one service on Windows 8 Pro. we did not have any problem with Windows 7 pro, but have a lot of with Windows 8 pro. Does anyone have same / similar experience with the same platform? Thanks for all helps

    987081 wrote:
    Hi everyone,
    I am experiencing some serious and strange problems with our IRM desktop client which Works with Java SE 6.30 (JRE 6U30). When I installed them (java and IRM) on Windows 8 Professional, IRM stops print spooler service, and block our clients to print anyting, and add a new printer by clicking ADD PRINTER button under Devices and Printer section. This is the visible face of the issue. However, I believe it affects more than one service on Windows 8 Pro. we did not have any problem with Windows 7 pro, but have a lot of with Windows 8 pro. Does anyone have same / similar experience with the same platform? Thanks for all helpsPlease NOTE that you posted this in an Oracle database forum.
    so what does above have to do with Oracle database?

  • Problem with Java Stack- dev_w2 log mentioned.

    Hi everyone, I have a problem with Java Stack, I could not connect to XI home page,
    I am unable to login to j2ee engine using visual Administrator.
    Please go through the log below. And help me out to resolve this issue and let me know what could be the problem.
    trc file: "dev_w2", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
    B  New connection 0 created
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    43
    M intno      20020600
    M make:      multithreaded, Unicode
    M pid        4140
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 4140) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: JAVA is not active
    M  DpShMCreate: sizeof(wp_adm)          13160     (1316)
    M  DpShMCreate: sizeof(tm_adm)          2780232     (13832)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpShMCreate: sizeof(comm_adm)          290000     (580)
    M  DpShMCreate: sizeof(vmc_adm)          0     (372)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 060A0040, size: 3195320)
    M  DpShMCreate: allocated sys_adm at 060A0040
    M  DpShMCreate: allocated wp_adm at 060A1B58
    M  DpShMCreate: allocated tm_adm_list at 060A4EC0
    M  DpShMCreate: allocated tm_adm at 060A4EE8
    M  DpShMCreate: allocated wp_ca_adm at 0634BB30
    M  DpShMCreate: allocated appc_ca_adm at 063518F0
    M  DpShMCreate: allocated comm_adm_list at 06353830
    M  DpShMCreate: allocated comm_adm at 06353848
    M  DpShMCreate: allocated vmc_adm_list at 0639A518
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0639A540
    M  DpShMCreate: allocated wall_adm at 0639A548
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 2 initializing ....
    X  <ES> InitFreeList
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M  calling db_connect ...
    C  Got ORACLE_HOME=c:\oracle\ora92 from environment
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSXI's password
    C  Connecting as /@SXI on connection 0 ...
    C  Attaching to DB Server SXI (con_hdl=0,svchp=04494404,svrhp=04495074)
    C 
    C  Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
    C 
    C  Now I'm connected to ORACLE
    C  Got SAPSXI's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=04494404,usrhp=0449D8AC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSXI/<pwd>@SXI on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  Database instance sxi is running on STARXI with ORACLE version 9.2.0.5.0 since 20081020
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20081020 123752 STARXI         
    M  db_connect o.k.
    I  MtxInit: 2 0 0
    M  SHM_PRES_BUF               (addr: 08230040, size: 4400128)
    M  SHM_ROLL_AREA          (addr: 62E40040, size: 77594624)
    M  SHM_PAGING_AREA          (addr: 08670040, size: 39845888)
    M  SHM_ROLL_ADM               (addr: 0AC80040, size: 775412)
    M  SHM_PAGING_ADM          (addr: 0AD40040, size: 525344)
    M  ThCreateNoBuffer          allocated 540152 bytes for 1000 entries at 0ADD0040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 0AE60040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 2 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B 
    B  db_con_shm_ini:  WP_ID = 2, WP_CNT = 10
    B  dbtbxbuf: Buffer TABL  (addr: 103D00C8, size: 30000128, end: 1206C4C8)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 14302848
    B  ***LOG BB0=> buffer TABL       started with length 30000128   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
    B  dbtbxbuf: Buffer TABLP (addr: 0E4000C8, size: 10240000, end: 0EDC40C8)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 5046656
    B  ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 41 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 65 * 4 = 260
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer EIBUF (addr: 0EDE00D0, size: 4194304, end: 0F1E00D0)
    B  ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 65 * 4 = 260
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer ESM   (addr: 0F1F00D0, size: 4194304, end: 0F5F00D0)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 3001 * 48 = 144048
    B  4: 1500 * 232 = 348000
    B  5: 3001 * 4 = 12004
    B  6: 1 * 200 = 200
    B  7: 193 * 4 = 772
    B  8: 5012 * 512 = 2566144
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer CUA   (addr: 0F6000D0, size: 3072000, end: 0F8EE0D0)
    B  ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 81 * 4 = 324
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer OTR   (addr: 0F8F00D0, size: 4194304, end: 0FCF00D0)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
    B   max_blocking_factor =  15,  max_in_blocking_factor      =   5,
    B   min_blocking_factor =  10,  min_in_blocking_factor      =   5,
    B   prefer_union_all    =   0,  prefer_union_for_select_all =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M 
    M  PfHIndInitialize: memory=<0AEEC488>, header=<0AEEC488>, records=<0AEEC4D0>
    M  SecAudit(init_sel_info): init of SCSA completed: 02 slots used
    M  ***LOG AV6=> 02& [rsauwr1.c    1619]
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=C:\usr\sap\SXI\DVEBMGS00\sec, AS=starxi, instanceid=00)
    N 
    N  SsfPseLoad: Downloading file C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 1078)
    N  SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    S 
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 121963B0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      intervals: query=50, rescan=1800, global=300 info=120
    S      processing queue enabled
    S  creating spool memory service RSPO-RCLOCKS at 0FEB00A8
    S  doing lock recovery
    S  setting server cache root
    S  using server cache size 100 (prof=100)
    S  creating spool memory service RSPO-SERVERCACHE at 0FEB0370
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2132 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 73 MB, reducing # of fragments
    A  System page size: 4kb, admin_size: 5032kb.
    A  PXA allocated (address 67850040, size 150000K)
    A  System name
    A  ORACLE...........................SXI........20081004121019.....................................
    A  is used for RFC security.
    A  Sharedbuffer token: 41534050...33 (len: 111)====== 2b61c190857e36a8681ef39a...
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm initialized (addr=579F4000 leng=20955136 end=58DF0000)
    A  >> Shm MMADM area (addr=57E69DF0 leng=126176 end=57E88AD0)
    A  >> Shm MMDAT area (addr=57E89000 leng=16150528 end=58DF0000)
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    A  Hotpackage version: 9
    M  ThrCreateShObjects          allocated 10568 bytes at 0FFD0040
    M  ThVBStartUp: restart pending update requests
    M 
    M  ThVBAutoStart: update-auto-delete
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SXI\DVEBMGS00\sec): ok
    N  SsfSapSecin: PSE C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse found!
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is C:\usr\sap\SXI\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 640, [6400.0.43.20020600]
    W    ITS Plugin: Int.version, [31]
    W    ITS Plugin: Feature set: [3]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    M  MBUF info for hooks: MS component UP
    M  ThSetEnqName: set enqname by profile
    M  ThISetEnqname: enq name = >starxi_SXI_00                           <
    E 
    E  *************** EnqId_EN_ActionAtMsUpHook ***************
    E  Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
    E  Enqueue Info: enque/disable_replication = 2
    E  Enqueue Info: replication disabled
    E 
    E 
    E  *************** ObjShMem_CheckAuthoritativeEnqId ***************
    E  Checking authoritative EnqId from EnqSrv into ObjShMem
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
    E  ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
    E  EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
    E  -SHMEM--
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 20.10.2008 12:38:10  1224486490 / 4140
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11  1224486491 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11  1224486491 / 1
    E  Status:         STATUS_OK
    E  -
    M  ThActivateServer: state = STARTING
    L  Begin of BtcSysStartRaise
    L  Raise event SAP_SYSTEM_START with parameter <starxi_SXI_00       >
    L  End of BtcSysStartRaise
    I 
    I  MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
    M 
    M  *** WARNING => ThCheckReqInfo: req_info & DP_CANT_HANDLE_REQ
    M  return number range rc 12
    M  *** WARNING => ThNoGet: get from object (cli/obj/subobj/range = 000/ALAUTOUID /      /01) returned rc 12
    S 
    S  server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
    B  table logging switched off for all clients
    S 
    S  server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
    M 
    M  hostaddrlist return 0
    M 
    M  hostaddrlist return 0
    M 
    M  hostaddrlist return 0
    M  hostaddrlist return 0
    M  hostaddrlist return 0
    Regards,
    Varun.

    You probably made the same mistake as I did and added the tables manually to the "sample" database instead of the "sun-appserv-samples" database.
    marc

  • Problem with printing to a HP Photosmart Premium C410

    Printer purchased and installed on July 9, 2011. Connected wirelessly to a D-Link Xtreme N GIGABIT  Router  Model   DIR-655. Router IP address 192.168.0.1
    The printer worked fine until last week. Then one of our Laptops could suddenly not print or scan anymore.
    There are Two Dell Laptops connected to the same router.
    The first Laptop, Dell XPS M1530 running Windows Vista Home Premium Service Pack 2, 4GB Ram 32 bit OS. This machine can print to HP C410 printer directly with no problems. It can see the printer’s embedded web server at 192.168.0.254 and can scan from there into a file on the laptop or can print the just scanned image from the embedded web server.  It can also print to it using HP eprint.
    The second Laptop, Dell Inspiron M1545 running Windows 7 Home Premium Service Pack 2, 3GB Ram 64 bit OS. This machine CANNOT print directly to the HP printer.  It can see the printer’s embedded web server at 192.168.0.24 and can scan from there into a file on the laptop (I used a PDF format and brought it up in Adobe Reader to be sure) but it CANNOT print the just scanned image from the embedded web server.  The print process fails and shows the document still in the spool queue with an error status. It can print to the HP C410 using HP eprint.
    I have used the HP suggested process of uninstalling all the printer software and re-installing it from the original CD (tried this three times) and by downloading it from www.hp.com. I have also installed the HP fix titled: Following a Network Installation, the Product Loses Functionality and Is Missing from the Devices and Printers Menu after the Computer Is Restarted in Windows 7 (64-bit Only)  
    I installed the fix after a complete un-install / re-install cycle.   I have run the HP Print Diagnostic Utility at this point in the process and it returns a clean (All Green Check Marks) report but its final test print fails in the same manner.  
    Thanks in advance for help in solving this problem.

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

Maybe you are looking for