Problem with spring effect in After Effects

Whey I'm animating an object from A to B using position, thats fine. But When I add one more keyframe that moves it back to A again (or anywhere else for that matter), my problem appears. The object kind of continue to spring forward in the direction it was heading, before it bounces back again. It's most obvious if I make the A to B movement really quick.
It seems like something After Effect does automatically, cause I have tested it in a bunche of totally clean files with nothing but the object I'm testing it on.
So my question: Where do I tweak these settings?

I guess you are facing the infamous boomrang effect. it's because by default, AE keframes are not linear (you can go to the preferences > general and check the linear option).
So 2 choices for you: either you check the option in the pref and redo your animation, or you can select your animated layer, press P to reveal the position keyframes, select all the keyframes, right clic on one of them and in the context menu select Keyframe interpolattion and in the menu that opens, replace any "bezier" or "autobézier" by linear.

Similar Messages

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problem with flash on IE11 after using adobe cleaner

Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

I have a problem with a chart refreshing after its bound data provider changes.

I have a problem with a chart refreshing after its bound data
provider changes. After the subsetHighLowData.refresh() is called I
would expect the chart to redraw, but it still looks the same. I
even inspected the debugger to see if the slice had taken place and
it had.
Any ideas coding friends?

"nikos101" <[email protected]> wrote in
message
news:gib6aa$prr$[email protected]..
>I have a problem with a chart refreshing after its bound
data provider
>changes.
> After the subsetHighLowData.refresh() is called I would
expect the chart
> to
> redraw, but it still looks the same. I even inspected
the debugger to see
> if
> the slice had taken place and it had.
>
> Any ideas coding friends?
>
> subsetHighLowData.source =
>
highLowData.source.slice(slider.values[0],slider.values[1]);
Just use the ArrayCollection's removeItemAt, and it should
handle the event
dispatching for you.
HTH;
Amy

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Problem with spring effect in After Effects

Similar Messages

Maybe you are looking for