Problem with SQL statement - Missing double quote in identifier

Hi
I am unable to run the following query in TOAD.
SELECT A.* FROM (SELECT VC.CAMPAIGN_NUMBER," +
               "VC.CAMPAIGN_TITLE,VC.CAMPAIGN_DESC,VC.START_DATE,VC.END_DATE,VC.CAMPAIGN_TYPE,VC.APPLICABILITY," +
               "VC.CAMPAIGN_PRIORITY FROM VM_CAMPAIGN VC WHERE VC.APPLICABILITY = 'Y' and VC.COUNTRY_CODE = ? " +
               "and VC.LANGUAGE_CODE = ? AND VC.CAMPAIGN_TYPE = ? AND SYSDATE BETWEEN VC.START_DATE AND " +
               "VC.END_DATE AND NOT EXISTS (SELECT 'X' FROM VM_CAMPAIGN_VIN VCV WHERE (VCV.VIN = ? AND " +
               "VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER))UNION SELECT VC.CAMPAIGN_NUMBER,VC.CAMPAIGN_TITLE," +
               "VC.CAMPAIGN_DESC,VCV.START_DATE,VCV.END_DATE,VC.CAMPAIGN_TYPE,VC.APPLICABILITY,VC.CAMPAIGN_PRIORITY " +
               "FROM VM_CAMPAIGN_VIN VCV ,VM_CAMPAIGN VC WHERE VCV.VIN = ? AND " +
               "VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER AND VC.COUNTRY_CODE = ? AND VC.LANGUAGE_CODE = ? AND " +
               "VC.CAMPAIGN_TYPE = ? AND SYSDATE BETWEEN VCV.START_DATE AND VCV.END_DATE AND SYSDATE BETWEEN " +
               "VC.START_DATE AND VC.END_DATE) A ORDER BY A.CAMPAIGN_PRIORITY DESC, A.END_DATE
I am getting "Missing double quote in identifier"
I am not sure how to rectify this SQL code. Any suggestions are welcome
thanks in advance

maybe this will work.
SELECT A.*
FROM (SELECT VC.CAMPAIGN_NUMBER,
               VC.CAMPAIGN_TITLE,
               VC.CAMPAIGN_DESC,
               VC.START_DATE,
               VC.END_DATE,
               VC.CAMPAIGN_TYPE,VC.APPLICABILITY,
               VC.CAMPAIGN_PRIORITY
          FROM VM_CAMPAIGN VC
         WHERE VC.APPLICABILITY = 'Y'
           And VC.COUNTRY_CODE = '&country_code'
           And VC.LANGUAGE_CODE = '&language_code'
           AND VC.CAMPAIGN_TYPE = '&campaign_type'
           AND SYSDATE BETWEEN VC.START_DATE AND VC.END_DATE
           AND NOT EXISTS (SELECT 'X'
                             FROM VM_CAMPAIGN_VIN VCV
                            WHERE (VCV.VIN = &VIN AND
                                   VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER))
        UNION
        SELECT VC.CAMPAIGN_NUMBER,
               VC.CAMPAIGN_TITLE,
               VC.CAMPAIGN_DESC,
               VCV.START_DATE,
               VCV.END_DATE,
               VC.CAMPAIGN_TYPE,
               VC.APPLICABILITY,
               VC.CAMPAIGN_PRIORITY
          FROM VM_CAMPAIGN_VIN VCV,
               VM_CAMPAIGN VC
          WHERE VCV.VIN = &VIN
            AND VCV.CAMPAIGN_NUMBER = VC.CAMPAIGN_NUMBER
            AND VC.COUNTRY_CODE = '&country_code'
            AND VC.LANGUAGE_CODE = '&language_code'
            AND VC.CAMPAIGN_TYPE = '&campaign_type'
            AND SYSDATE BETWEEN VCV.START_DATE AND VCV.END_DATE
            AND SYSDATE BETWEEN VC.START_DATE AND VC.END_DATE) A
ORDER BY A.CAMPAIGN_PRIORITY DESC, A.END_DATE

Similar Messages

Missing double quote in identifier help!

Hi there I need help with fixing this code, im trying to display the total of employees for Job title and location and its giving me a message saying" missing double quote in identifier" , please help, THANKS
SELECT j.job_title, “Job Title”,
l.city “Location”
e.employee_id “Employees ID”
COUNT(*) "No of Employees"
FROM hr.jobs j , hr.locations l,hr.employees e

Hi,
I suspect you might have more success if your replaced your open and close double quotes (i.e. “ and ”) by standard double quotes (").
This is the forum for the SQL Developer Data Modeler product. You're more likely to get an answer to this sort of question if you post on the SQL and PL/SQL forum: https://forums.oracle.com/forums/forum.jspa?forumID=75
David

Problem with sql statement after migration

Hi, recently I copied a production database X to a remote location, to serve as a test upgrade database. Original is 32 bit and test database is 64 bit. After migration it turned out that one sql statement consumed much more CPU during EXECUTE phase than on production database. Explain plans are the same. Why CPU is different? How can I trace the problem?
ORIGINAL SERVER TKPROF OUTPUT:
call count cpu elapsed disk query current rows
Parse 1 0.12 0.33 0 0 2 0
Execute 1 542.60 2165.29 2 6 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 542.73 2165.62 2 6 2 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66 (SPB)
Rows     Row Source Operation
      0 SORT UNIQUE (cr=6 pr=2 pw=0 time=719909655 us)
      0   FILTER (cr=6 pr=2 pw=0 time=719909615 us)
      2    NESTED LOOPS (cr=0 pr=0 pw=0 time=719895787 us)
      2     HASH JOIN (cr=0 pr=0 pw=0 time=719881575 us)
      2      NESTED LOOPS (cr=0 pr=0 pw=0 time=1210563833 us)
      2       NESTED LOOPS (cr=0 pr=0 pw=0 time=1210549798 us)
      2        NESTED LOOPS (cr=0 pr=0 pw=0 time=1210519159 us)
330261         REMOTE TWFLPROCESSINSTANCES (cr=0 pr=0 pw=0 time=29176788 us)
      2         REMOTE TAMCONTRACTEDITEMD (cr=0 pr=0 pw=0 time=1177866001 us)
      2        REMOTE TAMPROPVALUES (cr=0 pr=0 pw=0 time=30580 us)
      2       REMOTE TREPVALUELISTITEMS (cr=0 pr=0 pw=0 time=13973 us)
24542745      REMOTE TAMCONTRACTEDITEMD (cr=0 pr=0 pw=0 time=638116004 us)
      2     REMOTE TWFLPROCESSINSTANCES (cr=0 pr=0 pw=0 time=14154 us)
      2    INDEX RANGE SCAN IDX_PROCES_ID (cr=6 pr=2 pw=0 time=13706 us)(object id 546934)
Rows     Execution Plan
      0 INSERT STATEMENT   MODE: ALL_ROWS
      0   SORT (UNIQUE)
      0    FILTER
      2     NESTED LOOPS
      2      HASH JOIN
      2       NESTED LOOPS
      2        NESTED LOOPS
      2         NESTED LOOPS
330261          REMOTE OF 'TWFLPROCESSINSTANCES' (REMOTE)
                     [T6STDBY.WR]
                    SELECT /*+ OPAQUE_TRANSFORM */ "ID","STATUS","STARTDATE"
                    FROM "DIALOG6"."TWFLPROCESSINSTANCES" "PI" WHERE
                      "STATUS"<>'A' AND "STATUS"<>'N' AND "STARTDATE">=:1-30
      2          REMOTE OF 'TAMCONTRACTEDITEMD' (REMOTE)
                     [T6STDBY.WR]
                    SELECT /*+ OPAQUE_TRANSFORM */ "CITEM_ID","ROOTCITEM_ID",
                    "PRODUCT_ID","CONTRACT_ID" FROM
                    "DIALOG6"."TAMCONTRACTEDITEMD" "CI" WHERE "PRODUCT_ID"=
                      934 AND "CONTRACT_ID"=:1
      2         REMOTE OF 'TAMPROPVALUES' (REMOTE) [T6STDBY.WR]
                   SELECT /*+ OPAQUE_TRANSFORM */ "PROPERTY_ID",
                   "VALUEOBJECT_ID","CONTRACTEDITEM_ID","DTO","ISVALID"
                   FROM "DIALOG6"."TAMPROPVALUES" "TV" WHERE "DTO" IS NULL
                   AND "ISVALID"='Y' AND "CONTRACTEDITEM_ID"=:1 AND
                     "PROPERTY_ID"=930326
      2        REMOTE OF 'TREPVALUELISTITEMS' (REMOTE) [T6STDBY.WR]
                  SELECT /*+ OPAQUE_TRANSFORM */ "ID","NAME" FROM
                    "DIALOG6"."TREPVALUELISTITEMS" "TVL" WHERE "ID"=:1
24542745       REMOTE OF 'TAMCONTRACTEDITEMD' (REMOTE) [T6STDBY.WR]
                 SELECT /*+ OPAQUE_TRANSFORM */ "CITEM_ID","CONTRACT_ID" FROM
                   "DIALOG6"."TAMCONTRACTEDITEMD" "CINAD"
      2      REMOTE OF 'TWFLPROCESSINSTANCES' (REMOTE) [T6STDBY.WR]
                SELECT /*+ OPAQUE_TRANSFORM */ "ID" FROM
                "DIALOG6"."TWFLPROCESSINSTANCES" "SYS_ALIAS_1" WHERE "ID"=
                  :1
      2     INDEX   MODE: ANALYZED (RANGE SCAN) OF 'IDX_PROCES_ID'
                (INDEX)
REMOTE SERVER TKPROF OUTPUT:
call count cpu elapsed disk query current rows
Parse 1 0.15 0.15 0 0 2 0
Execute      1   1210.69    3831.70          0          6          0           0
Fetch 0 0.00 0.00 0 0 0 0
total 2 1210.85 3831.85 0 6 2 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66 (SPB)
Rows     Row Source Operation
      0 SORT UNIQUE (cr=6 pr=0 pw=0 time=681448432 us)
      0   FILTER (cr=6 pr=0 pw=0 time=681448397 us)
      2    NESTED LOOPS (cr=0 pr=0 pw=0 time=681448144 us)
      2     HASH JOIN (cr=0 pr=0 pw=0 time=681443808 us)
      2      NESTED LOOPS (cr=0 pr=0 pw=0 time=168646003 us)
      2       NESTED LOOPS (cr=0 pr=0 pw=0 time=168636029 us)
      2        NESTED LOOPS (cr=0 pr=0 pw=0 time=168580989 us)
327667         REMOTE TWFLPROCESSINSTANCES (cr=0 pr=0 pw=0 time=9177863 us)
      2         REMOTE TAMCONTRACTEDITEMD (cr=0 pr=0 pw=0 time=158011360 us)
      2        REMOTE TAMPROPVALUES (cr=0 pr=0 pw=0 time=55007 us)
      2       REMOTE TREPVALUELISTITEMS (cr=0 pr=0 pw=0 time=9947 us)
24542745      REMOTE TAMCONTRACTEDITEMD (cr=0 pr=0 pw=0 time=3509657414 us)
      2     REMOTE TWFLPROCESSINSTANCES (cr=0 pr=0 pw=0 time=4309 us)
      2    INDEX RANGE SCAN IDX_PROCES_ID (cr=6 pr=0 pw=0 time=160 us)(object id 552075)
Rows     Execution Plan
      0 INSERT STATEMENT   MODE: ALL_ROWS
      0   SORT (UNIQUE)
      0    FILTER
      2     NESTED LOOPS
      2      HASH JOIN
      2       NESTED LOOPS
      2        NESTED LOOPS
      2         NESTED LOOPS
327667          REMOTE OF 'TWFLPROCESSINSTANCES' (REMOTE)
                     [T6STDBY.WR]
                    SELECT /*+ OPAQUE_TRANSFORM */ "ID","STATUS","STARTDATE"
                    FROM "DIALOG6"."TWFLPROCESSINSTANCES" "PI" WHERE
                      "STATUS"<>'A' AND "STATUS"<>'N' AND "STARTDATE">=:1-30
      2          REMOTE OF 'TAMCONTRACTEDITEMD' (REMOTE)
                     [T6STDBY.WR]
                    SELECT /*+ OPAQUE_TRANSFORM */ "CITEM_ID","ROOTCITEM_ID",
                    "PRODUCT_ID","CONTRACT_ID" FROM
                    "DIALOG6"."TAMCONTRACTEDITEMD" "CI" WHERE "PRODUCT_ID"=
                      934 AND "CONTRACT_ID"=:1
      2         REMOTE OF 'TAMPROPVALUES' (REMOTE) [T6STDBY.WR]
                   SELECT /*+ OPAQUE_TRANSFORM */ "PROPERTY_ID",
                   "VALUEOBJECT_ID","CONTRACTEDITEM_ID","DTO","ISVALID"
                 FROM "DIALOG6"."TAMPROPVALUES" "TV" WHERE "DTO" IS NULL
                   AND "ISVALID"='Y' AND "CONTRACTEDITEM_ID"=:1 AND
                     "PROPERTY_ID"=930326
      2        REMOTE OF 'TREPVALUELISTITEMS' (REMOTE) [T6STDBY.WR]
                  SELECT /*+ OPAQUE_TRANSFORM */ "ID","NAME" FROM
                    "DIALOG6"."TREPVALUELISTITEMS" "TVL" WHERE "ID"=:1
24542745       REMOTE OF 'TAMCONTRACTEDITEMD' (REMOTE) [T6STDBY.WR]
                 SELECT /*+ OPAQUE_TRANSFORM */ "CITEM_ID","CONTRACT_ID" FROM
                   "DIALOG6"."TAMCONTRACTEDITEMD" "CINAD"
      2      REMOTE OF 'TWFLPROCESSINSTANCES' (REMOTE) [T6STDBY.WR]
                SELECT /*+ OPAQUE_TRANSFORM */ "ID" FROM
                "DIALOG6"."TWFLPROCESSINSTANCES" "SYS_ALIAS_1" WHERE "ID"=
                  :1
      2     INDEX   MODE: ANALYZED (RANGE SCAN) OF 'IDX_PROCES_ID'
                (INDEX)Edited by: Przemek P on 2012-01-27 07:40
Edited by: Przemek P on 2012-01-27 07:50

Could you please edit your post and use \ tags so the output is more user friendly?
Type: \Your Code Here\It will display as:Your Code Here

Strange problem with SQL-Statement

Hi guys,
i encountered a strange problem trying to execute a statement
like this:
Insert Into Data Set Text = 'Exception-Type: {0} Message: {1}';
I'm using createStatement and executeUpdate.
But the message stored looks like:
Exception-Type: 0{} Message: 1{}
I'm using MySQL 3.23. if I use ODBC everthing is o.k.!?
Any suggestions
Thanks

I found a solution,
i've thought it through once again. the sql-parsing
mechanism seemed to be the right direction.
i guess the odbc mysql implementation does a sql-statement
conversion, so the string is stored correctly into the
database. the jdbc-implementation doesn't.
if i replace { with \{ it works. the backlash can be used
to masquerade some characters in mysql.
my application is database independent (or it should be)
so i wonder if this works with oracle , db2 etc.
mike

Problem with SQL Statement for Result Filtering

Dear Visual Composer Experts,
Here is another Question from me: I have a SQL Query that is working as the data service
Select AB.AgingBandID, AB.AgingBand,
Sum(Case when priority='Emergency' then '1' Else 0 End) as [Emergency],
Sum(Case when priority='Ugent' then '1' Else 0 End) as Ugent,
Sum(Case when priority='High' then '1' Else 0 End) as High,
Sum(Case when priority='Medium' then '1' Else 0 End) as Medium,
Sum(Case when priority='Low' then '1' Else 0 End) as Low
from DimAgingBand AB left outer join
(Select AgingBandID , priority , yeardesc
from vNotifications where YearDesc = (select year(getdate())-1)) as vN
on AB.AgingBandID=vN.AgingBandID
where AB.AgingBandID<>'1'
Group by AB.AgingBandID, AB.AgingBand
Order by AB.AgingBandID
That would return me a table as in the following:
     Agingband     E     U     H     M     L
     < 1week     0     0     0     0     1
     1 - 2 weeks     0     0     0     0     0
     2 - 4weeks     0     0     0     0     1
> 1month     8     2     1     1     6
Now that I would like to add some parameters to filter the result, so I modify the query and put it in the SQL Statement input port of the same data service. The query is like this:
     "Select AB.AgingBandID, AB.AgingBand,Sum(Case when priority='Emergency' then '1' Else 0 End) as [Emergency],Sum(Case when priority='Ugent' then '1' Else 0 End) as Ugent,Sum(Case when priority='High' then '1' Else 0 End) as High,Sum(Case when priority='Medium' then '1' Else 0 End) as Medium,Sum(Case when priority='Low' then '1' Else 0 End) as Low from DimAgingBand AB left outer join (Select AgingBandID , priority , yeardesc from vNotifications where YearDesc like '2009%' and Branch like '" & if(STORE@selectedBranch=='ALL', '%', STORE@selectedBranch) & "' and MainWorkCentre like '%') as vN on AB.AgingBandID=vN.AgingBandID where AB.AgingBandID<>'1' Group by AB.AgingBandID, AB.AgingBand Order by AB.AgingBandID"
However this input port query keeps giving me error as NullPointerException. I have actually specified a condition where the query will run if only STORE@selectedBranch != u2018u2019.
I have other filtering queries working but they are not as complicated query as this one. Could it be possible that query in the input port cannot handle left outer join?
Could it be anything else?
Help is very much appreciated.
Thanks & Regard,
Sarah

Hi,
Thank you very much for your replys. I've tested if the dynamic value of the condition is integer, it's OK
But if the ClassID type is not integer, it's string, I write a SQL Statement like:
"Select DBADMIN.Class.ClassName from DBADMIN.Class where DBADMIN.Class.ClassID = '1' "
or with dynamic condition:
"Select DBADMIN.Class.ClassName from DBADMIN.Class where DBADMIN.Class.ClassID = '"&@ClassID&"'"
or I write the SQL Statement for insert/update/delete data,
I always have errors.
I've tested if the dynamic value of the condition is integer, it's OK
Do you know this problem ?
Thank you very much & kindly regards,
Tweety

Strage Performance Problems with SQL Statements....

Hi,
I have realized a strange performance collapse while changing simple things in SQL Statements...
I have build a simple Statement:
SELECT
a.AAA,
a.BBB,
a.CCC,
b.AAA
from
TABLE_A a,
TABLE_B b,
TABLE_C c
where
a.XXX=b.XXX
and c.XXX = a.XXX
and c.yyy = 'SOMETHING'
Its very fast, even with complex XSL Transformations...
After Putting a GROUP BY or DISTINCT into the statement (to surpress Dataset "Clones") it tooks around 100 times more Time then before....
I have tested the statement in a SQLPlus, it was as fast as before, but in the XMLPublisher it tooks much longer.....
Have you realizesd this Problem before?
Greetings...

PROBLEM SOLVED !
It has to be 8.1.6 across the whole environment.
null

Problems with SQL statement ..Urgent Help required

Hi
I have a table with something like this
::: inidicates column seperation
col1 ::: col2 ::: col3 ::: col4
ab,abc,abvfg,fghy ::: x1 ::: y1 ::: z1
ba,mkl,huji,kill ::: x2 ::: y2 ::: z2
I want to get something like this :
col1 ::: col2 ::: col3 ::: col4
ab ::: x1 ::: y1 ::: z1
abc ::: x1 ::: y1 ::: z1
abvfg ::: x1 ::: y1 ::: z1
fghy ::: x1 ::: y1 ::: z1
and so on......
Either a procedure or a single sql statement is fine..
PS: the first column can have any number of words separated with comma (,)
Please advise
Thanks in advance

create table kris (
a varchar2(200),
b varchar2(20),
c varchar2(20),
d varchar2(20));
insert into kris values('ab,abc,abvfg,fghy', 'x1','y1','z1');
insert into kris values('ba,mkl,huji,kill', 'x2','y2','z2');
select substr(','||a||',', instr(','||a||',', ',', 1, rn) +1,
     instr(','||a||',', ',', 1, rn+1) - instr(','||a||',', ',', 1, rn) -1)
     v,b,c,d
from (select length(a) - length(translate(a, '1,', '1')) +1 L,
     a, b, c, d from kris) t, (select rownum rn from cat) c
     where c.rn <= t.L
order by a, rn;
V B C D
ab x1 y1 z1
abc x1 y1 z1
abvfg x1 y1 z1
fghy x1 y1 z1
ba x2 y2 z2
mkl x2 y2 z2
huji x2 y2 z2
kill x2 y2 z2

Problem with sql statement

hi
i have a strange problem....when i run the following code with the 'if' statement commented out then it works fine. but when i have to search a particular name, say roy , then i include that if statement. but now it gives an error like no such data found.
if the return typ of result.getString(2) is a string type then i wonder what is the problem. i enclose the code below.
import java.sql.*;
import java.io.*;
public class checkDoc
     public static void main(String args[])
          String name;
          ResultSet result;
          try
               name= "roy";
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               Connection con;
               con = DriverManager.getConnection("jdbc:odbc:MyDataSource","","");
               Statement stat = con.createStatement();
               result = stat.executeQuery("Select * from Details1");
               while (result.next())
/* problem here*/
/*     if(result.getString(2).equals(name))
     */               System.out.println(result.getString(2));
          catch(Exception e)
               System.out.println("Error"+e);

thanks alot for that help...but now there is another silly problem!..
i following is perhaps the simplest code possible for insering data into an ACCESS database.(simplest possible with just one column by the name Doc_name and table name is docdetails)...but it gives the error...
"java.sql.SQLException:syntax error or in INSERT INTO statement"
someone plz help!
import java.sql.*;
public class checkDoc4
     public static void main(String args[])
          ResultSet rs;
          try
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               Connection con;
               con = DriverManager.getConnection("jdbc:odbc:MyDataSource2","","");
Statement stat = con.createStatement();
                    stat.executeUpdate("INSERT INTO docdetails" +
     "VALUES ('ankur')");
          catch(Exception e)
               System.out.println("Error"+e);

Again the SUM and DISTINCT Problem (With SQL Statement)

Here is the actual SQL,
select
NVL(l.pr_cust_prod,'zzzzz') A,
NVL(l.pr_prod_code,'zzzzz') B,
NVL(l.pr_lot_no,'zzzzz') C,
NVL(l.db_waf_qty,'99999') lotQty,
NVL(t.db_cust_po,'zzzzz') poNum,
NVL(p.oe_po_line,'99999') poLineNum,
i.db_shpmt_no invNum,
from
db_invoice i, db_line_lot l, db_inv_item t, db_prod_line p
where
l.db_shpmt_no like 'U388%'
and i.db_invo_date > sysdate - 500
and l.pr_run_type = 'PR'
and l.db_shpmt_no = i.db_shpmt_no
and l.db_shpmt_no = t.db_shpmt_no
and l.db_item_no = t.db_item_no
and p.db_ref_numa1 = t.db_tsmc_po
and l.db_shpmt_no not in
(select distinct db_shpmt_no from ftp_cust_ship
where DB_MAST_ACCT='U388' and sys_name='SENT')
and l.pr_prod_code like '%Z_'
group by l.pr_lot_no, l.db_line_numb, l.pr_cust_prod, l.pr_prod_code,
t.db_cust_po, i.db_delv_cod2, l.db_lot_desc, i.db_shpmt_no,
p.oe_po_line
order by lotNum
the problem is that if I dont use SELECT DISTINCT at beginning
the result is like
F , LOTQTY , PONUM , POLINENUM
DP8568.00,25 ,BVI10080 ,1
DP8568.00,25 ,BVI10080 ,2
DP8568.00,25 ,BVI10080 ,1
DP8568.00,25 ,BVI10080 ,1
DP8568.00,25 ,BVI10080 ,2
DP8568.00,25 ,BVI10080 ,1
DP8568.00,25 ,BVI10080 ,1
DP8568.00,25 ,BVI10080 ,2 //pleae note the QTY and POLINENUM
Then if Add SELECT DISTINCT, the result will be
F ,LOTQTY , PONUM , POLINENUM
DP8568.00,25 ,BVI10080,1
DP8568.00,25 ,BVI10080,2
but I change the NVL(l.db_waf_qty,'99999') lotQty, statement to NVL((SUM( l.db_waf_qty)),'99999') lotQty,
this will give me the result
F ,LOTQTY, PONUM , POLINENUM
DP8568.00,75 , BVI10080 ,2
DP8568.00,125 , BVI10080 ,1
Which I excepted the result as
F ,LOTQTY, PONUM , POLINENUM
DP8568.00,25 , BVI10080 ,2
DP8568.00,25 , BVI10080 ,1
And Advise??
Thanks a lot
Jon

based on the data set you given
SQL>
SQL> With t As
2 (
3 Select 'DP8568' c1 ,0.25 c2,'BVI10080' c3,1 c4 From dual Union All
4 Select 'DP8568' ,0.25 ,'BVI10080' ,2           From dual Union All
5 Select 'DP8568' ,0.25 ,'BVI10080' ,1           From dual Union All
6 Select 'DP8568' ,0.25 ,'BVI10080' ,1           From dual Union All
7 Select 'DP8568' ,0.25 ,'BVI10080' ,2           From dual Union All
8 Select 'DP8568' ,0.25 ,'BVI10080' ,1           From dual Union All
9 Select 'DP8568' ,0.25 ,'BVI10080' ,1           From dual Union All
10 Select 'DP8568' ,0.25 ,'BVI10080' ,2           From dual
11 )
12 Select c1,
13         sum(c2) lot_qty,
14         c3,
15         c4
16 From
17 (
18    Select c1, --Sum(c2) over (Partition By c1,c4 Order By c4)
19           row_number() over (Partition By c1,c4 Order By c4) rn,
20           c2,
21           c3,
22           c4
23    From t
24 ) Where rn = 1
25 Group By c1, c3, c4;
C1        LOT_QTY C3               C4
DP8568       0.25 BVI10080          2
DP8568       0.25 BVI10080          1
SQL>

Problems with SQL statement

Here is the problem that I have .. I have a table that gets updated every 30 minutes.. and the columns are:
Day Shift MDate
The data is as follows:
wed M 09012003
wed N 09012003
thu M 09022003
thu N 09022003
I want a SQL or PL/SQL that can help me in grabbing the distinct MDate where I have the instance of both M and N in the shift.
For the above data, I want to get distinct MDates as 09012003
09022003
But here is the problem; at some point in time say in the evening.. the data looks like this
wed M 09012003
wed N 09012003
thu M 09022003
For the above data, I want to get distinct MDates as 09012003
This is because "day" column with "thu" does not have both the instances of M and N in the "shift" column
Any help in this regard is highly appreciated..
Thanks in advance

Use 'group by' and 'having':
create table ttest(Day varchar2(3), Shift varchar2(1), MDate varchar(8));
insert into ttest values('wed', 'M', '09012003');
insert into ttest values('wed', 'N', '09012003');
insert into ttest values('thu', 'M', '09022003');
insert into ttest values('thu', 'N', '09022003');
select distinct mdate from ttest group by mdate having count(1) > 1;
MDATE
09012003
09022003
delete from ttest;
insert into ttest values('wed', 'M', '09012003');
insert into ttest values('wed', 'N', '09012003');
insert into ttest values('thu', 'M', '09022003');
select distinct mdate from ttest group by mdate having count(1) > 1;
MDATE
09012003

Problem with SQL connection and a Collection

hi all,
I have two problems with sql...
1. how can I assign the values of a resultset to a collection?
2. how can I close the sql connection, because when I close the statement and connection error shows me in the resultset
thanks!

Hello Pablo,
RetrivingResults In Collection:
1)   use getObject method, and assign it to collection.
          Collection c_obj=new ArrayList();
         while(rs.next())
                c_obj.add(rs.getInt(Project_ID), rs.getString(Project_Name));
Closing ResultSet
2)               The close() methos of ResultSet closes the ResultSet object, like bellow
                ResultSet rs = stmt.executeQuery("SELECT a, b FROM TABLE2");
                rs.close(); //Closes the result set

Problem with READ Statement in the field routine of the Transformation

Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
     and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
                                             accno = source_package-accno
                                             binary search
                                             transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.

i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.

Double quote encapsulated identifiers in sql developer 1.5.1

hello,
i migrated a mysql database to oracle using the sql developer 1.5.1 on linux. unfortunately i'm using some reserved words in my table name / columns. how is it possible to generate an import script that uses double quote encapsulated identifiers? in the migration workbench, there is an option named "Create ANSI-compilant names" which should do what i need, but i cannot find this option in sql developer.
thank you for your help. regards,
sebastian

I'm not sure what your question is; Did you migrate successfully? How do you generate an import script? What is failing? Can you provide an example?
K.

Problem with SQL space and quotes

Hi all,
We have some old generated java code which includes sql statements like:
select count ("ID") from SUBSCRIBER;
In our production database (10.2.0.2) this SQL works. In our test database (which is also 10.2.0.2), this SQL causes ORA-00942: table or view does not exist error. However, on the same test database, the following variations work:
SELECT count ("ID") from SUBSCRIBER;
select count (ID) from SUBSCRIBER;
select count("ID") from SUBSCRIBER;
I cannot change the original java code and I must configure our test database to execute the same SQL. I suspect this behaviour is caused by some oracle init parameters (maybe the "compatible" parameter?). Does anybody have any idea how this problem can be solved?
Best regards,
SerkanC

Table or View does not exist means that the user who is running your query can not see the table.
The problem is that your user does not have appropriate privileges. If you don't specify the schema_name, you are relying on a synonym existing.
Finally, some "Bright Spark" may have created the table using double quotes with the table_name not being entirely in uppercase.
P.S. If your code was in a procedure you would find this error at compile time.
So:
i) find out which user is running the java code
ii) connect as that user in sqlplus and issue the same statement
You should get an error.
Determine if a private or public synonym exists (all_synonyms data dictionary view).
This has nothing to do with compatibility.

Problem with Prepared Statement & MS Access

Hi
I have tried to find some info about this but can't see anything specific to what I think the problem may be. Hopefully someone can point me in the right direction.I am trying to get information out of an MS Access database using a Prepared Statement but I am getting strange results.
When I run the query in the database it gives me the correct totals (�51) for 4 records. When I run the Prepared Statement ,I get 81. Has it got anything to do with the data type I am using( sorry if this is a really basic question). here is my code- the connection etc is elsewhere.
private void getReportMoneyTotal() throws SQLException
          Calendar todayTotal =Calendar.getInstance() ;
           SimpleDateFormat reportDateFormat = new SimpleDateFormat("dd MM yyyy");
          PreparedStatement preparedT =context.getConnection().prepareStatement(
               "SELECT Sum(tblSession.Fee) AS Total, Count(tblBooking.BookingID) AS CountOfBookingID FROM tblSession INNER JOIN "+
               "(tblBooking INNER JOIN tblCustomer_Booking ON tblBooking.BookingID = tblCustomer_Booking.BookingID) ON tblSession.SessionID = tblBooking.SessionID "+
               "WHERE (((tblBooking.EventDate)>DateAdd('m',-1,#"+reportDateFormat.format(todayTotal.getTime())+"#)) AND ((tblSession.Session)='Morning' Or (tblSession.Session)='Evening')) OR (((tblSession.Session)='Afternoon') AND ((tblBooking.Extension)=Yes))"
          ResultSet resultTotal =preparedT.executeQuery();
          resultTotal.next();
          Double total =resultTotal.getDouble("Total");
          Locale locale = new Locale("GBP");
        NumberFormat gbpFormat = NumberFormat.getCurrencyInstance(locale);
          System.out.println(gbpFormat.format(total));
          preparedT.close();
     }I do realise that my code probably isn't very elegant but I'm only learning!

Hi Matt--
I am not clear if you are saving the url with the # # around
the text or if
the
data already contains the # marks.
When you insert a link, you want to make sure you insert is
insert into table ( link1) values ( <cfqueryparam
cfsqltype="cf_sql_varchar"
value='#linkvaluehere#'> )
remember to
1) enclose your data's value inside quotes (some databases
are picky about
single v. double quotes).
2) if it IS in quotes, swap doubles for singles and see if
that helps.
3) make sure your data being saved is NOT double hashed like
'##linkvalueher##'. Double ##'s tell
Coldfusion not to treat it as a variable.
hope his helps,
tami
"Mattastic" <[email protected]> wrote in
message
news:f9c7h0$8ub$[email protected]..
| Hi Folks,
|
| I'm storing a link in a nvarchar field in SQL server,
www.foo.co.uk, it
looks
| and works fine in SQL server. Problem occurs when I setup
an ADP in Access
and
| insert links. Certain links have a hash symbol around them.
so
|
http://www.foo.co.uk, would be #
http://www.foo.co.uk# which is
causing
problems.
|
| Can anyone tell me why this is happening? and how to stop
it?
|
| Thankyou
|

Problem with SQL statement - Missing double quote in identifier

Similar Messages

Maybe you are looking for