Problem with SSAS cube reporting action when using pivot filter with cubevalue function

Hi everyone,
I have a quite specific problem when I combine cube actions (Reporting Action SSRS) with Excel's cubevalue() function.
The problem is when I use a pivot filter as a parameter for the cubevalue() function. The action item does not show up in the context menue.
The cube action works fine when I do it from a "normal" pivot or if I use the cubevalue() function without the reference to a pivot filter (all the parameters in the function are "hard-coded").
I use SSAS 2012 and Excel 2010.
Thanks for yor help.
Gerhard

Hi everyone,
I actually figured out a way to solve this problem. I had to use a detour to solve this bug in Excel (at least I think it's a bug).
What I needed to do: I had to make Excel belive that the filter is actuall hard-coded and does not come from a pivot filter. This was only possible by adding a new calculated measure to the cube that gives back the MEMBER_Unique_Name to the current member
passed. This "value" can then be used to go back to the cube and select the cubemember function. Here is a small example.
This is the cube member:
CREATE MEMBER CURRENTCUBE.[Measures].[RegCompBranNameKey] AS
[Company Branch].[Reg - Comp - Bran Name].CurrentMember.Properties("MEMBER_UNIQUE_NAME", TYPED),
VISIBLE = 0 ;
And this is then done in a hidden Excel cell:
=CUBEMEMBER("Metrics";
IF(RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");5)="[ALL]";"[ALL]";
RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");LEN(CUBEVALUE("GlobalMetrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]"))-57)
I had to use the UniqueName property because I have a combined filter. That's also the reason for this truncation and also useing the last part of it. If you just have a straight key you more easily use it.

Similar Messages

Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

Problem with 'GetType' Function calling in MSVC++

Hello
I have problem with the function in TestStand API .
When I call the function " GetType " with the following statements in
a DLL called from TestStand (NI) implemented in MS VC ++
, it does not work and this exception is caught by the ONLY ' try catch ' block
to catch exceptions in TestStand API giving the error message
" Unexpected operating system error".
VARIANT_BOOL ok;
VARIANT_BOOL hi;
BSTR Name;
PropertyObject *property = (*step_)->AsPropertyObject();
( *step_ is a STEP Object of type Step* *step_ )
property = property->GetPropertyObject( "TS.SData", 0);
enum TS:ropertyValueTypes i = property->GetType( "" , 0 , &hi , &ok
, &Name);//Problem
Please solve my problem.
You can email me at [email protected]
Thankyou very much.
Best regards
Fahad Ejaz

Hello,
The problem is that the Name is not initialized (the BSTR is defined as OLECHAR*). Thus, replace the
BSTR Name;
declaration with the following lines:
char buf[1024];
BSTR Name = _bstr_t(buf);
This should solve the problem.
Best Regards,
Silvius
Silvius Iancu

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Problem with CONTAINS function

Hi all!!
i got a problem with contains function. i'm running oracle 11g.
if i execute this query:
SELECT x.lid as id, x.sztitular as titular, e.szname as proName, x.szresumen as resumen, b.sztitle as catName,
f.szname as secName, d.szname as cliName, x.datecreation as datecreation
FROM CPR_PRACTICAL_CASE x,ctg_category b, CPR_CLIENT d, pro_product e, CAT_SECTOR f, CPR_PCASE_PRODUCT g, CPR_PCASE_SECTOR h,
PRO_PRODUCTCATEGORY i WHERE x.lid = g.lpcaseid and e.lid = g.lproductid and x.lid = h.lpcaseid
and f.lid = h.lsectorid and x.lclientid = d.lid and i.lproductid = e.lid and b.lid = i.lcategoryid
AND x.szlocale = 'es-ES' AND x.bavailable = '1'i get 1 row as result with the column sztitular = "rodillos de medidas"
if i only add one more sentece to that query:
AND CONTAINS( x.sztitular, 'rodillos',1) >0the query returns an empty set.. i really don't understand why because the term "rodillos" is present in the row's column called "sztitular"...
i've put an index on that column:
create index ITXT_TITULAR on CPR_PRACTICAL_CASE(sztitular) INDEXTYPE IS CTXSYS.CONTEXT;any help?
many thanks!!!!
Edited by: ElMazzaX on May 21, 2012 5:51 PM
Edited by: ElMazzaX on May 21, 2012 5:53 PM

How are you synchronising the index?
http://docs.oracle.com/cd/E11882_01/text.112/e24435/ind.htm#i1008452
Also see the Oracle Text forum:
Text

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

I have been having problems with YouTube functionality when using Firefox, some of them having begun with the latest Firefox update

After a fairly recent update, I began having the option to paste text disappear, I've had backspace cause the browser to go back to the previous page while in a text box, and other issues which are apparently a matter of Firefox not recognizing the fact that I am typing in a text box.
After the last update, suddenly YouTube video page URL links no longer translate into links containing the title of the video, and also things like the use of bookend asterisks in order to have text appear in bold typeface no longer work.

i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..

SSAS SSRS Report Action on Cell Value w/ Embedded Single Quote Not Executing

I have configured an SSAS 2008 R2 cube SSRS ReportAction. I'm having problems when the member value for a cell has an embedded single quote, e.g. abc's. The action displays on the context menu appropriately, but when I click on the action, nothing happens.
For member values that do not have the single quote, the action works as designed. I've added a calculated ember to escape the embedded single quote by adding another single quote, e.g. abc''s, with no luck. Is there a resolution or workaround for this?

Hi Mdccuber,
According to your description, you create a reporting action in you cube, and it works fine except the members that have embedded single quote, right? In your scenario, it seems that you pass this value to the report as the parameter.
In SQL Server Analysis Services (SSAS), when pass values to a report, multi-select parameters have to be placed into IN statement and SQL Server Reporting Services (SSRS) will do single-quote wrapping for string values automatically. In this case, the original
value that have embedded single quote will be damaged. So this action not work. You can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product.
Regards,
Charlie Liao
TechNet Community Support

Custom Report Erroring when using All as parameter

Hi All,
I am facing a problem in running custom report.
=> DB Server Info
RDBMS : 11.2.0.2.0
Oracle Applications : 12.1.3
I am getting following error.
REP-1401: 'afterpform': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
custom report two parameters one is date parameter and name parameter
date parameter is using as fnd_date.canonical_to_date(:P_EFFECTIVE_DATE) in queries.
if I give name parameter for individual, then it works fine.
if I give name parameter as "All", then its erroring. I tried it in my best way, but its not working.
variable data length increased though its not working, can any one help me on this please....
Here is the Afterpform code
function AfterPForm return boolean is
lName VARCHAR2(5000); -- its changed from lName varchar2(50);
begin
IF :P_NAME <> 'All' THEN
lName:= 'AND name =:P_NAME';
ELSE
lName:='AND name in                                                             (select name from <******>
          order by name
END IF;
:P_Where_Clause := lName;
return (TRUE);
end;
Thanks for all your help so far.
Ram.
Edited by: user8822881 on Feb 9, 2012 10:43 AM

excuse i understood that you use All as parameter name
ORA 6502 is when you assign a char to a number or when assign a value which length is greater than the variable length
what's the dimension of p_where_clause for example?
you can trace with srw.message
--- <Code>
function AfterPForm return boolean is
lName VARCHAR2(5000); -- its changed from lName varchar2(50);
begin
srw.message(1,'step 1');
IF :P_NAME = 'All' THEN
srw.message(2,'step 2');
lName:='AND name in (select name from <table>
order by name
srw.message(3,'step 3');
ELSE
srw.message(4,'step 4');
lName:= 'AND name =:P_NAME';
srw.message(5,'step 5');
END IF;
srw.message(6,'step 6');
:P_Where_Clause := lName;
srw.message(7,'step 7');
return (TRUE);
end;
---</Code>
i think your query is not good
for example
lName:= 'AND name =:P_NAME';
when instance the query the query search this condition but no use the value of p_name parameter
write
lName:= 'AND name = '||''''||:P_NAME||''''; then :p_name take the value

Report hangs when using Remote Desktop

I am having trouble with Crystal Reports 11. I was wondering if there is a known issue when using it in conjuction with Remote Desktop.
Here is the scenario.
I am using Remote Desktop to connect to a server.
I am running a report using Crystal Reports 11.
The records have already been retrieved (approx. 800,000 records) and is printing - slowly.
It takes around 75 minutes for the report to print 12 pages.
If the Remote Desktop connection is closed, then re-established, the Crystal Reports pops up a message box stating "Not Supported". The pages of data the were previously printed are now blank. (For example: if it was on page 1 of 9+ it will go back to 1 of 1+ and the page will be blank.)
If I use a VPN to connect to the network, then use the Remote Desktop Connection to connect to the server, the connection will periodically disconnect and the re-establish. This does not occur when not using Crystal Reports.
Is there a problem with using Crystal Reports with Remote Desktop? Is there a better way to run my reports remotely?
Thanks for any input.
Ryan

You may be better off posting this in the Crystal Reports Design forum as that team supports issues regarding working with the CR designer:
SAP Crystal Reports
Ludek

Cube Solve Time when using MAX Aggregation Operator

Hello,
We have created a cube to implement the count distinct measure we need.
The cube contains only one measure (COUNT) and uses the MAX operator to aggregate across all other dimensions except for the one we want to count (which uses the SUM operator). We have set the precompute percent to 60% for the bottom partition and 0% for the top partition. The cube is compressed.
The problem is that the SOLVE step for a partition when performing a COMPLETE cube build, seems to be taking a very long time and is taking up huge amounts of TEMPORARY tablespace.
We have succesfully created another cube with the same dataset which uses the SUM operator across all dimensions.
This cube build was completed in a reasonable amount of time even though we had 5 stored measures and 80% aggregation for the top partition.
Is this behaviour expected when using MAX operator?
Thank you,
Vicky

Thank you, David.
As you said we are using mixed operators because we are doing a distinct count.
We will try setting the precompute percent to 35%,although I'm a bit worried about the query performance in this case.
Neelesh, I think that Atomic Refresh was set to TRUE during the last refresh but the cube was the only object in the build script.
No other cubes or dimensions were maintained in the same build so I don't think it could have affected the use of TEMP tablespace.
Generally we don't use Atomic Refresh.
Thank you,
Vicky

Problem with SSAS cube reporting action when using pivot filter with cubevalue function

Similar Messages

Maybe you are looking for