Problem with start up. please help.

hi. i have recently had trouble with my powerbook g4 in that it wont startup. it goes to the main blue screen and wont go any further. i ran a couple of things and it worked again then it froze after a while and did the same thing. i have run the disk utility as it says in the support page but it has only been able to repair one of the two volumes it tried to repair. it says that 1 volume could not be repaired.
it still will not start up but now comes up with the loading page saying "starting mac os x" but goes no further. how can this be fixed?
any help would be greatly appreciated.
thank you

1. You wrote: " i have been told by someone that there is an option when reinstalling os x to keep the files on the drive. if i was to do this without having to purchase a third party disc utility program would this help>?"You've obviously asked someone who either:• Was not given a full description of the problem by you.
• Doesn't know the first thing about Mac OS X and should not be giving advice.The option is an Installation option called "Archive and Install." However, you already have a corrupted drive directory, meaning anything you write to the drive via Archive and Install could potentially overwrite real data. So, you might be able to reinstall the OS via Archive and Install but then find that:
• You can't log in to your account.
• Your e-mail, pictures, music, etc. — or many items therein — are corrupted, missing, or gone.
Performing an Archive and Install on a corrupted drive won't fix the drive corruption and carries a high risk that your personal data may be damaged or lost. The Archive and Install itself may fail.
One should never perform an Archive and Install on a corrupted drive and check that the drive is free of directory corruption before proceeding with an Archive and Install: see Step 2 of the Procedure specified in my "General advice on performing an Archive and Install" FAQ.
2. You wrote: "sorry to keep asking"I am too. I've advised you as to what you need to do, and the potential risks associated with such. It's up to you now to make a decision and move forward. If you don't trust my advice, then you're free to make that choice. I've done all I can for you.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

Problem with p7n diamond please help

i have a new p7n diamond
i connect the power supply plugs, hard drives, video card(n260gtx new too), etc
when i push the power button the processor cooling fan run but the pc do nothing
don't gave me any beep from a bad connection
nothing
it just don't start
other thing
when i plug the video card power, the video card cooling fan don't start yet
please help!
basic from my PC
intel core 2 quad
2 hard drive 500gb
4g ddr
n260gtx 896mg

Dadilo, you have gone to some length but sadly no positive result, but at least you have cleared some of the ifs and buts. i have looked at your mobo bios even so it says it supports your cpu q6600 it seems there has been a few updates (see links, particularly please pay attention to the pointer in pictures). you have these options left to you.
1- put the pc on it's side and take the 240 volt plug out (no power what so ever) and clear the way from any cables etc.. and remove the mobo battery with a Small screw driver (push the clip to one side the battery pups out) and hold it in your Palm for ten second or so then put it back and put everything back make sure the single memory is firmly in place so is the graphic card. then connect the power and all cables etc the power the pc.
2-your last option before you give up is try another cpu on the mobo preferably core 2 duo rather than quad and if you get it working your next move is to update the bios and i do not know how good you are in updating bios???. if none of these works then sadly the mobo is faulty in my opinion but i may be wrong :
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot037.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot038.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot039.jpg

Weirdest problem with ipod!PLEASE HELP ME!!!

Okay, i tried to load a playlist that had about 100 songs on it. While its loading, the update just stops. My ipod starts going crazy.The apple logo keeps lighting up and then the light doesnt come on but the logo is still there. You can hear the inside of it like trying to come on but then it just keeps doing the same thing til the battery life runs out! I really need help on this! I've tried to reset but everytime I do it it just keeps doing the same thing. I dont know if i should wipe all my songs off of itunes or what but im so confused and so aggravated with it. PLEASE HELP ME! I'D REALLY APPRECIATE IT!
Windows XP

Welcome to Apple Discussions!
See if any of these help...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Problem with "Package Spec" please help.

Hello once again.
I'm developing a master-detail form, so I'm using a "Package Spec" variable to hold the primary key value from the master form. The primary key value for the master is generated by a sequence.
Here's the package spec:
PACKAGE primary_keygen IS
pkey varchar2(15);
END;Now the master table has the following "Before Insert" Trigger .
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
DECLARE
primary_key_value varchar2(15);
BEGIN
select lpad(to_char(ref_gen.nextval), 4,'0')
into primary_key_value from dual;
primary_keygen.pkey:='ABC/'||primary_key_value;
:new.Ref_Number:=primary_keygen.pkey;
END;For the detail block. I have the following "Before Insert Trigger" to generate the primary key values.
CREATE OR REPLACE TRIGGER DET1_NUM_GEN
BEFORE INSERT
ON DETAIL1
FOR EACH ROW
BEGIN
if :new.M_ref_number is NULL THEN
:new.M_ref_number:=primary_keygen.pkey;
ENd if;
END;Works quite fine if I have only one detail block. But if I have multiple detail blocks. Depending on the user's selection. i.e. After entering data into the master block, the user selects a detail block ('Letter type'- using stacked canvases for this purpose and radio buttons for selecting the view) and then Inserts data into it. here's what I do in the Detail block2.
CREATE OR REPLACE TRIGGER OREF_NUM_GEN
BEFORE INSERT
ON DETAIL2
FOR EACH ROW
BEGIN
if :new.O_ref_number is NULL THEN
:new.O_ref_number:=pkey_gen.master_key;
ENd if;
END;Now the problem is that When I enter one record into detail1, works fine, but for the second time, when I try to insert another record. the master table gets a new reference number (primary key value) while the detail block gets the previous value that was used in the first record!, so that means 'pkey_gen.master_key' is holding the old value, while in my opinion it should hold the new value, I dont know whats wrong here. If I try to insert two consecutive records into the same detail table, I get an error saying "Unique Constraint voilated", becuase the variable is holding the old values.
And lastly after it inserts the record into the database, I get a dialog box saying, "successfuly inserted 2 records into the database" and when I click ok, the Form closes by itself, any ideas on how to stop this?
I'm really stuck here. Please help me out on this.
Thanks.
Note: I'm using Form6i with Database 10g.
Message was edited by:
fahimkhan82

Hi,
Maybe the best way to start is to try building a new form from scratch. For simplicity I will assume that you have one master and one detail table. Master table has a primary key and the detail table has a foreign key to the master. Based on this, with the forms you can create a database block based on your master table. Use the wizard. Again using the wizard, create a second block based on the detail table. You'll see a screen to prompt to create a relationship. Create one by selecting the master table and the right foreign key relation. Now take a close look to all triggers automatically created by the form. Also check the "Relations" object found in you master block object tree. Note that the foreight key column in the detail table has the "Copy Value From Item" property set to monitor the master block's primary key.
This is the basic. You don't need the database triggers, except (in case you want to insert through, say, SLQPlus) the one for the master table, which will look like this:
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
BEGIN
IF :new.ref_number IS NULL THEN
select 'ABC/'||pad(to_char(ref_gen.nextval), 4,'0')
into :new.ref_number
from dual;
END IF;
END;
Now you have to take care about the inserts in your form. Create PRE-INSERT trigger on the master block.
IF :master.ref_number IS NULL THEN
SELECT 'ABC/'||pad(to_char(ref_gen.NEXTVAL), 4,'0')
INTO :master.ref_number
FROM dual;
END IF;
Run the form and explore different situations to see how the form is keeping the data integrity.
Compile with Shift+K (incremental). Sometimes forms blow just because not all of the trigers were compiled properly.
Hope this helps...

Problem with file downloads - please help

Good morning. Since upgrading to BT Infinity 2, I have been experiencing the following problems:
Cannot update Sonos firmware to version 5 - download times out and gives error 30
Cannot download most files from safari - all start for the first few kb and then just hang
Cannot download larger PDF files from Mac Mail
These problems manifest themselves over wireless and wired connections, with the BT Homehub 5 and an Asus router. My ipad has no problems when on other networks or if I access my email from my work computer. When talking to BT technical support over the chat facility yesterday the connection dropped once every 10-30 seconds before reconnecting again. All of this leads me to believe that I have an intermittent failure on my broadband connection however BT insist that there is nothing wrong with the line or the router. I have changed channels on my router but this does not seem to make things better. Internet is working fine on all my devices for web browsing - only file downloads experiencing problems.
Please help.

Oh sorry, I thought from your description you were using an ASUS connected to the HH5, but it turns out you're using them separately.
Is there a firmware update you can get on the ASUS?
If you found this post helpful, please click on the star on the left
If not, I'll try again

Problem with long report - please help

We are using crystal report with ASP.NET/C# (Visual Studio 2005).
Using Crystal report viewer control on the web page to have previews.
A particular report is for say 6000 pages. I can not preview the report on the web page.
I have the following questions:
1. Does it make sense to think of previewing such a huge report on web page?
2. What should be the alternate?
3. I tried "Export to PDF" technique, but it failed.
Thanks in advance for your help.
Regards,
Kangkan

I tried to use exportToPDF technique. It works when the number of page is less. But just hangs up when the number of pages is high. I am working on finding the breaking number.
There is no problem with HD space as well.
I also tried to print the report to a printer on the server directly. I used the printer as "Adobe PDF" to use Acrobat Distiller to create the PDF. It starts up and asks for the destination for the PDF file also. Once it starts the system shown an error and the Microsoft Feedback Assistant for failed application comes up.
I am now trying to print the pages to a network printer connected to the server. Shall get back with latest update after sometime.
Please do look into other possibilities or points where I might have committed an mistake.
Thanks and regards,
Kangkan

Problem with my macbook -PLEASE HELP!

when i swtch my macbook on the sceen lits up for two seconds and then goes black. i tried all the instructions in the booklet but when i was installing the mac os x again (had the first disc in) there came a note that i have to replase disc 1 by disc 2. then i checked that i had the right setting that all my info wouldnt disappear when installing again and then it just started to install the thing even tho i still had disc 1 inside and before that it told me to change the disc. ok that was probably ok but then in the middle of installing disc one my macbook's sceen went dark again. when i started it again it seemed that i was in the same point where i started from. how can i continue from this? can my precious info still be saved? if i now continue installing do i start from the beginning? i live in a small town and no one else here has a mac and im not very good with any computers. PLEASE HELP!
macbook Mac OS X (10.4.8)

Your data could possibly be saved....If the installation didn't full complete, your data should still be on your hard drive. As for you MacBook, it sounds like a MAJOR problem and should be brought to an Apple Genius at once.
It is possible for them to obtain your data and get it to you somehow. You should bring this to your Apple store, and, judging that you have the service plan, they will replace or repair your laptop accordingly.
I haven't heard anything of the sort for the MacBook, so, hopefully someone has and can further your troubleshooting procedures before you take it in and risk being away from your laptop for a week or so. I would opt for taking it to your Apple Store.
Remember to mark as helpful or solved.
-benny

Serious problems with footnotes. Please help!

Hello!
Working with InDesign CS 6 with a book containing about 200 pages with 330 footnotes, numbered from 1 to 330 throughout the whole book.
This day suddenly adding a new footnote at the beginning of the book (somewhere between footnote 11 and 12) is no longer possible. InDesign stops working and has to be ended by way of the taskmanager.
When I add a footnote somewhere between footnote 280 and 281 it is still working.
When I delete half of the book and half of the footnotes it is also working.
So there seems to be a capacity-problem where InDesign "says": enough footnotes.
I am not optimistic about a solution because (as an old user) I am aware that Adobe not repaired even the smallest imperfections concerning the management of footnotes since Pagemaker 3.
But does someone know a solution or work around?
The only thing I can think of is to manually add "footnoot-like" comments under the text on every page and placing some superscript sign to "fake" real footnotes. That is what we already have to do if we want to place a footnoot inside a table. Another very old and never solved problem! Even not after 10 years!
I am also uncertain if breaking up all these footnotes starting new numberings for each section will solve the problem as the TOTAL amount of notes will not change. But adding a footnoot AT THE BEGINNING of a small section (with less footnotes) may "push forward" less notes and therefor may (?) prevent InDesign from crashing?
Thanks for your appreciated help!
Peter.

See Still serious footnote problems! Please, help!

Immportand. Problems with MB. Please help.

Hello
Im having a problem with my PC in the moust unpleasent moment as I can’t do my college work and I cant afford new PC in the next 4 months, so any help with my problem will be grealty appriciated.
OK.
Here is my problem.
When I work and that’s usualy using Internet and Office XP my PC is starting to slow down (mouse cursor is scroling very slow, I cant close windows) and afther a while its turning off. Whell its not turn off exactly because CPU, GPU and PSU fans are still working but the monitor is turing on stand by. When this happens I can’t do restart so I have to puss power on/off button on the case of the PC to turn the PC off. If I try to turn in on afther that NumLock and CapsLock indicators on the keyboard will flash for a second as well as monitor and again only CPU, GPU and PSU fans works but the system is not starting. This happened several times and every time till now I waited for a day to start my PC again. That was till the last time. Now afther 4 days I still can’t to start my PC.
NOTE.
When I opned the case four led diodes that are on my MSI mainboards were lightning red. In the manual explanation for this is “The procesor might be damage or not instaled properly. Damage/discharge lithium batery”
I doubt that the problem is procesor because the PC will never start if the procesor is damaged of instaled properly.
Iv also changed lithium batery but the problem remained.
And another thing. PC Alert 4 somethimes showd that CPU and system tempetarure were 78 C. Afther this restart the system and went in bios to see if that was the real temperature but the bios showed 32 C for procesor and 22 for system.
I have the latest drivers, bios and updates for windows. Iv checked for viruses with the latest updates for Pc-cillin 2002 and I didn’t find any viruses. Iv cheked every componets on other configuratios and they worked fine.
Now a frend of me told me that the cause of problem are condenzator on mainboard araund the procesor.
If you know whats is the problem please help me to resolve it.
Thank you..

Please tell us more about your system, including PSU.
It sounds very, very much like a melted condensator. It is not hard to check:
Open case and look for brown or darkcoloured... yecch... on the motherboard. Another symtom will be harder and harder to start and more and more frequent shut downs.
There are people here I believe that can guide you to change them. I would get another board because the problem might happen again. In either case, save all important work, logins, etc. to an external unit. Mail it to a friend if nothing else is available.

I suppose it is the problem with socket connection,Please help

Hi,
I'm trying to build a chat server in Java on Linux OS.I've created basically 2 classes in the client program.The first one shows the login window.When we enter the Login ID & password & click on the ok button,the data is sent to the server for verification.If the login is true,the second class is invoked,which displays the messenger window.This class again access the server
for collecting the IDs of the online persons.But this statement which reads from the server causes an exception in the program.If we invoke the second class independently(ie not from 1st class) then there is no problem & the required data is read from the server.Can anyone please help me in getting this program right.I'm working on a p4 machine with JDK1.4.
The Exceptions caused are given below
java.net.SocketException: Connection reset by peer: Connection reset by peer
at java.net.SocketInputStream.SocketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:119)
     at java.io.InputStreamReader$CharsetFiller.readBytes(InputStreanReader.java :339)
     at java.io.InputStreamReader$CharsetFiller.fill(InputStreamReader.java:374)
     at java.io.InputStreamReader.read(InputStreamReader.java:511)
     at java.io.BufferedReader.fill(BufferedReader.java:139)
     at java.io.BufferedReader.readLine(BufferedReader.java:299)
     at java.io.BufferedReader.readLine(BufferedReader.java:362)
     at Login.LoginData(Login.java:330)
     at Login.test(Login.java:155)
     at Login$Buttonhandler.actionPerformed(Login.java:138)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1722)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:17775)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:4141)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:253)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:261)
     at java.awt.Component.processMouseEvent(Component.java:4906)
     at java.awt.Component.processEvent(component.java:4732)
     at java.awt.Container.processEvent(Container.java:1337)
     at java.awt.component.dispatchEventImpl(Component.java:3476)
     at java.awt.Container.dispatchEventImpl(Container.java:1399)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3302)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3014)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2967)
     at java.awt.Container.dispatchEventImpl(Container.java:1373)
     at java.awt.window.dispatchEventImpl(Window.java:1459)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:439)
     at java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:131)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
     My program looks somewhat like this :
1st class definition:
public class Login extends Jframe// Login is the name of the first class;
Socket connection;
DataOutputStream outStream;
BufferedReader inStream;
Frame is set up here
public class Buttonhandler implements ActionListener
public void actionPerformed(ActionEvent e) {
String comm = e.getActionCommand();
if(comm.equals("ok")) {
check=LoginCheck(ID,paswd);
test();
public void test() //checks whether the login is true
if(check)
new Messenger(ID);// the second class is invoked
public boolean LoginCheck(String user,String passwd)
//Enter the Server's IP & port below
String destination="localhost";
int port=1234;
try
connection=new Socket(destination,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStream = new BufferedReader(new InputStreamReader(connection.getInputStream()));
outStream=new DataOutputStream(connection.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
System.out.println("connected to "+destination+" at port "+port+".");
BufferedReader keyboardInput=new BufferedReader(new InputStreamReader(System.in));
String receive=new String();
try{
receive=inStream.readLine();
}catch(IOException ex){ error("Error reading from server");}
if(receive.equals("Logintrue"))
check=true;
else
check=false;
try{
inStream.close();
outStream.close();
connection.close();
}catch (IOException ex){
error("IO error closing socket");
return(check);
// second class is defined below
public class Messenger
Socket connect;
DataOutputStream outStr;
BufferedReader inStr;
public static void main(String args[])
{ Messenger mes = new Messenger(args[0]);}
Messenger(String strg)
CreateWindow();
setupEvents();
LoginData(strg);
fram.show();
void setupEvents()
fram.addWindowListener(new WindowHandler());
login.addActionListener(new MenuItemHandler());
quit.addActionListener(new MenuItemHandler());
button.addActionListener(new Buttonhandle());
public void LoginData(String name)
//Enter the Server's IP & port below
String dest="localhost";
int port=1234;
int r=0;
String str[]=new String[40];
try
connect=new Socket(dest,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStr = new BufferedReader(new InputStreamReader(connect.getInputStream()));
outStr=new DataOutputStream(connect.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
String codeln=new String("\n");
try{
outStr.flush();
outStr.writeBytes("!@*&!@#$%^");//code for sending logged in users
outStr.writeBytes(codeln);
outStr.write(13);
outStr.flush();
String check="qkpltx";
String receive=new String();
try{
while((receive=inStr.readLine())!=null) //the statement that causes the exception
if(receive.equals(check))
break;
else
     str[r]=receive;
     r++;
}catch(IOException ex){ex.printStackTrace();error("Error reading from socket");}
catch(NullPointerException ex){ex.printStackTrace();}
} catch (IOException ex){ex.printStackTrace();
error("Error reading from keyboard or socket ");
try{
inStr.close();
outStr.close();
connect.close();
}catch (IOException ex){
error("IO error closing socket");
for(int l=0,k=1;l<r;l=l+2,k++)
if(!(str[l].equals(name)))
stud[k]=" "+str[l];
else
k--;
public class Buttonhandle implements ActionListener
public void actionPerformed(ActionEvent e) {
//chat with the selected user;
public class MenuItemHandler implements ActionListener
public void actionPerformed(ActionEvent e)
String cmd=e.getActionCommand();
if(cmd.equals("Disconnect"))
//Disconnect from the server
else if(cmd.equals("Change User"))
     //Disconnect from the server & call the login window
else if(cmd.equals("View Connection Details"))
//show connection details;
public class WindowHandler extends WindowAdapter
public void windowClosing(WindowEvent e){
//Disconnect from server & then exit;
System.exit(0);}
I�ll be very thankful if anyone corrects the mistake for me.Please help.

You're connecting to the server twice. After you've successfully logged in, pass the Socket to the Messenger class.
public class Messenger {
    Socket connect;
    public static void main(String args[]) {
        Messenger mes = new Messenger(args[0]);
    Messenger(Socket s, String strg) {
        this.connect = s;
        CreateWindow();
        setupEvents();
        LoginData(strg);
        fram.show();
}

PROBLEM WITH NEW ROW --- PLEASE HELP

Hello,
I've had it with the framework. It's been 20 hours and counting that I am trying to insert/validate a new record.
Things just don't work as advertised.
Here's the situation:
I have an entity object with various validation rules in the validate() method.
Then I have a simple JSP page to insert new records.
At submit of button, I follow the framework's default
create new row and fill it up, with the difference
that i need to validate the row as soon as I fill it up
with data from the http request:
<jbo:OnEvent name="Create">
<jbo:Row id="newrow" datasource="ds" action="CreateInRange" >
<% try { %>
<jbo:SetAttribute dataitem="*" />
<%
newrow.validate(); //******* NOTICE HERE THAT I VALIDATE
} catch (JboException ex) {
newrow.remove();
throw ex;
} %>
</jbo:Row>
</jbo:OnEvent>
Unexpected behavior 1: If the validation fails,
newrow DOES NOT GET REMOVED!!!! I know this
since when I view data thru a data table component,
the row is there WITH THE ERROR INFORMATION set!!.
If I do a commit transaction, then the erroneous information ENDS UP IN THE DATABASE!!!!!
Unexpected behavior 2: If I do a rollback, every
call to subsequent pages results in a jsp error:
java.lang.ClassCastException: oracle.jbo.html.jsp.datatags.OnEventTag
PLEASE HELP.
Chris Lambrou

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

Having problems with Frontrow. Please help!

Hi,
i've been trying to figure this out all day today but i haven't found any solution. hopefully you Mac Geniuses can help. now, my problem isn't that my videos won't play, because they do. they all play perfectly. okay, so when i launch Frontrow, all my video files appear under their respective folders; my TV Shows appear under the TV Shows folder and my Music Videos appear under the Music Videos folder. however, for some strange reason, these files also want to appear under the Movies folder. That means they're showing up twice! -under the Movies folder and TV Shows/Music Videos. is there anyway to fix this, because it's really cluttering my Movies folder and i admit i'm a really anal neat-freak.
Also, i have correctly labeled the video files as Movie, TV Show or Music Video under iTunes. Everything is organized well under iTunes, so i doubt it's that.
please help!!
Message was edited by: ec84

It might be because with the new update, it seems as though anything stored in the MOVIES folder , shows up under movies in Front Row. I have a folder of Transformers AVI'S in my movie folder, now it shows up in the movie directory of front row

Messaging Problem with 3.0 Please Help

I upgraded to 3.0 and now 3GS. Prior to this my wife was able to text me from her verizon blackberry, no issues and it came in on the iphone messaging. Now, somehow the iphone is changing it into an "email". The text appears as her [email protected] It's not a real email because it's not appearing in my home outlook server which is where the iphone pulls my emails from. This is way inconvient since the text doesn't appear till i go manually pull email. Anyone else have these issues. She didn't do anything different, just texts to my phone #? Techies please help.
Paul in San Diego

Hi Omid,
As far as I am aware of you will need to have a two way trust to proceed with the integration.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Problem with start up. please help.

Similar Messages

Maybe you are looking for