Problem with starting Boot camp

Hi all,
when i try to use boot camp assistant(open boot camp assistant and click continue) it say 'you must update your system soft ware before using this setup assistant' evebn though I have updated by system using Software update option. Please help out with this problem.
Thanks..

This solved my problem...
I recommend going into your Disk Utility and under your hard drive on the left side click on the macintosh HD and then on the top make sure you have Journaling 'enabled.' (It's highlighted in green on the top menu bar in the disk utility box.)

Similar Messages

Serious problem when instaling Boot Camp.

Hi, I hope someone can help me because my boot camp has been giving me every problem imaginable.
When I first tried to install windows, boot camp had no problems creating the partition, but my windows XP, for whatever reasons, did not installed.
So, I borrowed a trial windows from a friend, it installed ok, and I installed 3Ds Max in it(which is pretty much the only reason I needed boot camp, since I don't own a PC), and everything was perfect for the 30 days the trial version lasted.
Then, after it expired, I destroyed, the re-created the partition again, and another friend gave me a copy of his windows XP, and from her everything went to ****. The system installed correctly, but when I ran windows, the graphics were incredibly slow, even dragging a window around the desktop looked really jaggy, and 3DS Max installed, but wouldn't run.
I tried the exact same thing with other 2 windows xp copies(all 32 bit), and the exact same thing happened. And now, I have noticed the when I create the partition for windows, it renames itself "untitled" in the mac os desktop, and, even if I erase it, when I turn on the computer it doesn't get me directly to Mac OS, but rather searches for the windows partition even if it's no longer there. I have to press the alt key for the mac partition to appear.
I hope someone can at least tell me what the **** is wrong with my boot camp, thanks to everybody in advance.

Hi and welcome to Discussions,
as for the startup problem: once you are in OSX goto System Preferences - Startup Volume and set your OSX volume to be the default startup volume.
(During the Windows installation this is set to be the WIndows partition and remains that way until resetted).
For the obvious with the Windows installation: after the successful installation of Windows did you insert your OSX install DVD while in Windows to install the needed BootCamp Windows Drivers ?
If not, then that's why you had these graphics problems.
Read through the BootCamp Installation Guide here http://www.apple.com/support/bootcamp/
Regards
Stefan

Can't start Boot Camp Assistant

Hello community.
When I want to start Boot Camp Assistant with only the bottom option ticked, and I click the Install button, nothing happens.
I can click it 10 times and still nothing happens.
When I tick the second and third options, it goes to about 2/3, then freezes.
I made the USB stick using
Windows 7 USB/DVD download tool
because when I try it with Boot Camp, it says
Your bootable usb drive could not be created.
Any tips how I can get it to work?
System Information: Model: iMac (27-inch Late 2012) • CPU: Intel Core i7-3770 (8 Threads, 4 Cores) @ 3.40 GHz • Memory: 32.00 GB • Disk Space: Total: 3.11 TB; Free: 2.84 TB • Graphics: Intel HD Graphics 4000, NVIDIA GeForce GTX 680MX • Screen Resolution: 2560 x 1440
I have tried 2 different USB sticks and both Windows 8 and Windows 8.1.

As pointed out a Google search will give you all the info you need. There are many articles on the subject.
https://www.google.com/search?q=erase+and+create+a+fusion+drive&oq=erase+and+cre ate+a+fusion+drive&aqs=chrome..69i57.8665j0j7&sourceid=chrome&espv=210&es_sm=122 &ie=UTF-8

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with starting JSPM

Hi all,
I have a problem with starting JSPM. We have just upgraded to SAP NWS 2004s SP11 SR2. We are in AIX server. So to execute JSPM, I log on to AIX server using PUTTy with <SID>adm. I go to /usr/sap/<SID>/DVEBMGS00/j2ee/JSPM and i execute the "go" program. But I have the following thing :
Current log directory is /usr/sap/OWA/DVEBMGS00/j2ee/JSPM/log/log_2007_04_25_14_54_53.
Waiting for SDTServer to connect on hostname froafbwod1/10.8.134.129 socket 6240 ...
So what happend, I don't understand anything...Pls, someone can help me?
Thanks for your reply...

Hi,
Hope this helps you - http://help.sap.com/saphelp_nw04s/helpdata/en/42/e7e7cb64ac3ee4e10000000a1553f7/content.htm
JSPM: Better Know It Now Than Later
JSPM does not start
JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase
Bye...

Problem with starting/stopping OPMN

Hi there,
i have an problem with starting and stopping the opmn. When i try to start/stop/reload the opm i get this error:
opmnctl: opmn is not running
root@klart1:/opt/oracle/product/aserver/opmn/bin>./opmnctl shutdown
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
opmnctl: opmn is not running
in english this means:
Communication error at the local port for OPMN-Server.
More Information about this error, see OPMN-Log-Files.
opmnctl: opmn is not running
here is a summary from the opmn.xml file:
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="/opt/oracle/product/aserver/lib:/opt/oracle/product/aserver/network/lib:/opt/oracle/product/aserver/lib:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386/client:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/../lib/i386:/usr/lib::/opt/oracle/product/aserver/jdk/jre/lib/i386"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
can anybody help me? it is urgent.
best regards
Daniel

Hi, thanks for reply to my problem.
Now i have an new problem , it's not possible to start opmn. (./opmnctl start) .
I get this error:
RCV: Transport endpoint is not connected
Communication Error for local port at OPMN-Server.
see log files for more information
opmnctl: opmn start failed
I have this logfiles:
HTTP_Server~1
ipm.log
OC4J~home~default_island~1
OC4J~OC4J_BI_Forms~default_island~1
ons.log
opmn.log
states (FOLDER !)
WebCache~WebCache~1
WebCache~WebCacheAdmin~1
i which can i see a detailled information about this error?

Problem with starting OEM-agent on NT (clustered)

We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
Klaas

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

I started Boot Camp on a MAC mini but then had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk Can I recover?

I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?

Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

HT3986 I have installed windows 7 into my macbook pro 15 inch with lions. This computer is the current 2.2 GH i7 chip with 500 GB HD. Now, how do I install the drivers. When I started boot camp, the system prompted me to create a CD. What do I do with

I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.

Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

Problem with starting Boot camp

Similar Messages

Maybe you are looking for