Problem with starting Lightroom CC 6.0 and 6.1

I upgraded to Lightroom CC (6.0) from 5.7.1. Photographer Cloud Service. Since completing the install, very time I go to start LR, I get an error box stating..."The action cannot be completed because the other program is busy. Chose 'Switch to" to activate the busy program and correct the problem". There are two boxes to click on, "Switch to", and "retry". Clicking on either will start LR but it takes several clicks to get it complete the start up.
I read a "fix" on the lightroom forum that deleting the SL Cache folder would fix it. That did for a couple days. However that error box has returned when I went to use LR this morning, the day after 6.1 installed. LR 6.1 did start normally after several cold boots of the computer the day the update was installed.
This is on a windows 7-64 bit desktop with 3.4 Intel 7 chip, 18 gig of memory, over 1 TB of free space on the drive LR is loaded on.
Thanks

For me, this was caused by some of my additional hard drives spinning down because of my power settings. Changing the power settings to never turn off hard drives fixed the problem.

Similar Messages

Problems with Start up after loading Parallel and adding Windows Vista

Everytime I start up my MacBook, I have to hold the option button down. Otherwise it goes into a booting up windows screen. How do I get the computer to go right to the Mac desktop, when starting up?
Thanks

agent412 wrote:
Everytime I start up my MacBook, I have to hold the option button down. Otherwise it goes into a booting up windows screen. How do I get the computer to go right to the Mac desktop, when starting up?
Thanks
You have selected Vista as your boot OS.
In Leopard, open the System Preferences and under Startup Disk, select Mac OS X, 10.5.whatever and that will solve your problem.
You can also set the boot preference in Vista, but I am not sure exactly where. BootCamp installs a similar boot option in Vista or XP.

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problem when start lightroom 6 on my windows 8.1 notebook

I have a problem when start lightroom 6 on my windows 8.1 notebook, the system says "impossible find input point in _crtCreateSymbolicLinkW in C:\windows\system32\msvcp110.dll", and lightroom 6 terminate. I disinstalled and reinstalled many times but I have always the same error. What is the problem? Thank for the answers.

Download update 4 for Intel x64 or Amd if your notebook have an Amd CPU of Visual studio 2012 and trya again. Before you can controll if the installer install library of visual studio 12 during installation and see if the library missing is on windows\system32.

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with starting JSPM

Hi all,
I have a problem with starting JSPM. We have just upgraded to SAP NWS 2004s SP11 SR2. We are in AIX server. So to execute JSPM, I log on to AIX server using PUTTy with <SID>adm. I go to /usr/sap/<SID>/DVEBMGS00/j2ee/JSPM and i execute the "go" program. But I have the following thing :
Current log directory is /usr/sap/OWA/DVEBMGS00/j2ee/JSPM/log/log_2007_04_25_14_54_53.
Waiting for SDTServer to connect on hostname froafbwod1/10.8.134.129 socket 6240 ...
So what happend, I don't understand anything...Pls, someone can help me?
Thanks for your reply...

Hi,
Hope this helps you - http://help.sap.com/saphelp_nw04s/helpdata/en/42/e7e7cb64ac3ee4e10000000a1553f7/content.htm
JSPM: Better Know It Now Than Later
JSPM does not start
JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase
Bye...

Problem with starting/stopping OPMN

Hi there,
i have an problem with starting and stopping the opmn. When i try to start/stop/reload the opm i get this error:
opmnctl: opmn is not running
root@klart1:/opt/oracle/product/aserver/opmn/bin>./opmnctl shutdown
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
opmnctl: opmn is not running
in english this means:
Communication error at the local port for OPMN-Server.
More Information about this error, see OPMN-Log-Files.
opmnctl: opmn is not running
here is a summary from the opmn.xml file:
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="/opt/oracle/product/aserver/lib:/opt/oracle/product/aserver/network/lib:/opt/oracle/product/aserver/lib:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386/client:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/../lib/i386:/usr/lib::/opt/oracle/product/aserver/jdk/jre/lib/i386"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
can anybody help me? it is urgent.
best regards
Daniel

Hi, thanks for reply to my problem.
Now i have an new problem , it's not possible to start opmn. (./opmnctl start) .
I get this error:
RCV: Transport endpoint is not connected
Communication Error for local port at OPMN-Server.
see log files for more information
opmnctl: opmn start failed
I have this logfiles:
HTTP_Server~1
ipm.log
OC4J~home~default_island~1
OC4J~OC4J_BI_Forms~default_island~1
ons.log
opmn.log
states (FOLDER !)
WebCache~WebCache~1
WebCache~WebCacheAdmin~1
i which can i see a detailled information about this error?

Problem with starting OEM-agent on NT (clustered)

We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
Klaas

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Problem with starting Lightroom CC 6.0 and 6.1

Similar Messages

Maybe you are looking for