Problem with starting nokia X6

Problem in ignition Nokia X6 screen turns white and blue letters and is nokia until the battery is removed! When the burst is all normal!
Ante Milina

If you want to switch the phone on and backup your data before trying jimmy's reset idea then try the following:
- Switch phone off (or pull battery out and put back in).
- plug in the phone charger, as soon as the screen lights up pull the charger pin out of the phone.
- when the screen goes black switch on the phone.
- plug the charger back into the phone when you feel the start-up vibration.
- phone should start instead of hang on the white Nokia logo screen.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Similar Messages

Memory problem with my Nokia 3220

Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
Shibuy
Thank You!!

I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I restart the cellphone ?

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I am experiencing some problems with my Nokia 701

I am experiencing some problems with my Nokia 701.
1)While updating OS with Nokia suit its restart then phone becoming dead and need to remove battery and insert it again in order to work and i need to run without completing full update
2)I am getting "Memory full please some applications and try it again" while watching videos after each 5-10 mins where as no apps are running in the background.
3)Getting System error while loading any apps from Ovi Suit or Nokia Store after Downloading
4)Disconnecting automatically from ovi suit apps and many times not connecting with the apps while usb is still connected and ovi suit option is selected from the phone .
5)Cant download any apps from Nokia store web page getting "Downloading error)
6)Some time apps are closing automatically
7)Camera at low light without flash is not working well more bad than 2 mp Rs 3000 phones
8)Many other problem with Nokia Suit
9)Sound is too low with loud speaker lower than any other smartphones even lower than other's Nokia 701.
And its my first smartphone from Nokia
Come on Nokia please help me out

If an update failed, but you can still access the phone, do a reset. Dial *#7370# followed by 12345 if required, the phone will set to out of the box, but you'll have to set it up again manually and reinstall your apps. Before doing this, connect to Nokia Suite and update to the latest available software, then set up, you should then find everything works fine.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Problem with a nokia 5310 xpress and a bluetooth

i have problem with a nokia 5310 xpress and a bluetooth!i can transfer anything from my phone to pc with or without pc suite! but when i want to transfer files from pc to phone i doesen"t work! with pcsuite soethings work but very slow! i want to transfer files witout pcsuite !
the blue tooth adapter it is dongle and it the software that i use is BlueSoleil 2.6.08
CAn anyone help me?

I'm having bigger problems...
the screen goes all white and off after a lil while....
Not even the vendor could do anything....

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with starting JSPM

Hi all,
I have a problem with starting JSPM. We have just upgraded to SAP NWS 2004s SP11 SR2. We are in AIX server. So to execute JSPM, I log on to AIX server using PUTTy with <SID>adm. I go to /usr/sap/<SID>/DVEBMGS00/j2ee/JSPM and i execute the "go" program. But I have the following thing :
Current log directory is /usr/sap/OWA/DVEBMGS00/j2ee/JSPM/log/log_2007_04_25_14_54_53.
Waiting for SDTServer to connect on hostname froafbwod1/10.8.134.129 socket 6240 ...
So what happend, I don't understand anything...Pls, someone can help me?
Thanks for your reply...

Hi,
Hope this helps you - http://help.sap.com/saphelp_nw04s/helpdata/en/42/e7e7cb64ac3ee4e10000000a1553f7/content.htm
JSPM: Better Know It Now Than Later
JSPM does not start
JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase
Bye...

Problem with starting/stopping OPMN

Hi there,
i have an problem with starting and stopping the opmn. When i try to start/stop/reload the opm i get this error:
opmnctl: opmn is not running
root@klart1:/opt/oracle/product/aserver/opmn/bin>./opmnctl shutdown
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
opmnctl: opmn is not running
in english this means:
Communication error at the local port for OPMN-Server.
More Information about this error, see OPMN-Log-Files.
opmnctl: opmn is not running
here is a summary from the opmn.xml file:
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="/opt/oracle/product/aserver/lib:/opt/oracle/product/aserver/network/lib:/opt/oracle/product/aserver/lib:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386/client:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/../lib/i386:/usr/lib::/opt/oracle/product/aserver/jdk/jre/lib/i386"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
can anybody help me? it is urgent.
best regards
Daniel

Hi, thanks for reply to my problem.
Now i have an new problem , it's not possible to start opmn. (./opmnctl start) .
I get this error:
RCV: Transport endpoint is not connected
Communication Error for local port at OPMN-Server.
see log files for more information
opmnctl: opmn start failed
I have this logfiles:
HTTP_Server~1
ipm.log
OC4J~home~default_island~1
OC4J~OC4J_BI_Forms~default_island~1
ons.log
opmn.log
states (FOLDER !)
WebCache~WebCache~1
WebCache~WebCacheAdmin~1
i which can i see a detailled information about this error?

Problem with starting OEM-agent on NT (clustered)

We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
Klaas

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

Weird problem with my Nokia E50

Hi guys!
I don't know whether this topic has been discussed before but I have a very weird problem with my Nokia E50. The problem is as follows: whenever I receive an sms message my phone remains silent (no vibration or sound) even though vibration is turned on and the sms sound is chosen, the phone is at full volume too
I've tried changing the profiles from General to Outdoor but the only sound I get is from keypresses
I don't know what went wrong. I'm totally stumped. Any help would be greatly appreciated
Darcorn

hi
I didn't update the firmware yet, and rebooting the phone didn't help.

Start-up problem with my Nokia 6630 series

Hi everyone! I'm new in the community. Please could anyone help with a problem I have with my 6630. I had just finished charging it and when put it on and tried to access an sms that came in the inbox was not accessible! Then I switched the phone off and later put it on only to get a shocker message which read -" phone start-up failed. Contact the retailer". I contacted the retailer who suggested I that the phone should be switched off again and later switched on. I have done this for the umpteenth time without success! Any one with an idea on how to solve this problem please. I will appreciate your urgent help. Thank you all.

Dear friend, the start-up problem I had with my nokia 6630 has been solved! I switched off the phone, removed the memory card and powered on. The phone to my surprise came alive. I switched it off again and reinserted the memory card before switching on again and lo and behold, my 6630 was up and kicking again! if anyone should have a similar problem, he of she should try what I did, i hope it works for others in similar situation.
Cheers.
so4so

Problems with my nokia 5800 XM

I have a big problem.... I can't install or uninstall anything on my 5800 . I have custom firmware 40.0.005. When I try to install or uninstall something it's says: Unable to start operation. Installer already in use.....Also A few days ago I had a problem with OVI store and I installed it but the shortcut is steel in the Application menu. ( if try to enter in ovi store it says that I have to update the application and if I try, I get an error). Is this a virus or a software problem? What should I do?
Solved!
Go to Solution.

yes it's safe and official too
Backup you device using Ovi Suite or Nokia PC Suite.
Dial *#7370# in to your device. Confirm that you wish to reset the device.
Enter the passcode (by default 12345).
The device will now be reset and the Maps application will have reverted to the original version. You can now reload your backed up data using Ovi Suite or Nokia Suite.
the last option is hard reset which is the combination of Green + Red + Camera + Power buttons while the phone is switched off till you see the Nokia Logo
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Problem with starting nokia X6

Similar Messages

Maybe you are looking for