Problem with starting/stopping podcasts with Apple headset button

Often, when I have paused a podcast on my 3GS using the button on the included headset and then try to play it again (using the headset button), it will play for a couple of seconds. Then the sound cuts out but if I look at the counter on the screen, it is actually still advancing. The only way to rectify it is to use the on-screen controls to pause and then play again. This has happened dozens of times over the span of several months, and it used to happen on my old 3G as well. I have reset and restored many times, so it's not related to that. Has anyone else had this problem?

Yes, I have the same problem. It is quite random and thought at first I was doing something wrong.

Similar Messages

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service  Apple Mobile Device  failed to start. Verify that you have sufficent priveleges to start system services.

    I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
    Thanks bluebanana 66

    Hi bluebanana 66,
    Thanks for visiting Apple Support Communities.
    There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Best,
    Jeremy

  • C2-00 Problem with Bluetooth headset

    I use it for a week and have a problem with bluetooth headset.
    When I finish a call my mobile is stop working.
    The only way to get it back is remove a battery.
    I try to use other bluetooth headset but it have the same problem.
    Please help me to fix this problem.
    Thank you.

    conceivably, yes, that is how its supposed to work
    i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
    thanks,
    vasilis

  • Problem with Apple Mail since OSX Mavericks

    Hello Folks,
    since i've updated my mid-2012 iMac to OSX Mavericks, i have a problem with Apple Mail: When i start the Apple Mail, the program says that it could not connect to the icloud mail server, and that i should enter my icloud passwort. When i do this, everything works fine. But that annoys me, because it worked without any problem under OSX Mountain Lion.
    Has anyone an idea what i can do to fix this?
    Regards,
    Alex

    In the iCloud pane of System Preferences, uncheck the box marked Mail and check it again.

  • Blackberry 8220 Flip Black problems with Bluetooth headsets/caller cannot hear me

    Problems with 3 headsets. Eralier it was working fine. but now I can hear the caller but the caller cannot hear me or anything from my side over the bluetooth headset. Otherwise without the headset the phone and the speakerphone work just fine. Any ideas????

    I am experiencing the same problem, started about 10 days ago. To date, I have reset network settings, and have restored to default without success.
    The weird thing with my issue I've noticed, after I go through a half dozen attempts at calling and recalling the person back, eventually, the problem goes away and the caller can hear me without issue after that. But then that may just be the 50% of the time occurrence.
    So, I wonder if this is signal related, although it has occurred in 3 different locations in the US. Or if there is some restricted, or privacy policy that is related to AT&T regarding my account when calling. Kind of like being on a no fly list?
    However, I can't continue with this happening, everyone says I am give Steve Jobs a bad name, so its to the genius bar or whatever they call it these days, I am heading.

  • If you have problems with Apple Apps after installing Mavericks

    I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open.  The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE.   I am guessing it has to do with permissions when setting up via iCloud.  Here's what I did to make my apps work again after the update:
    Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
    Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
    After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
    After it boots up, the apps began working like they should have.

    That's where your questions about Lion should be posted.

  • Not working imessage!! I can not send imessage than after apple id. There are problems with Apple ?? Thanks!

    Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
    Before the service reset function. Wait 24 hours to activate imessage.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

    In my Iphone 5, Nothing on my App Store is working,  its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

    settigns>itunes and app store to make sure you are signed in.. If  you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
    also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
    one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

  • When I turn on my iPod Touch 5th generation, half of the screen has vertical white lines and it is irresponsive to the touch... is there anyway this can be fixed because this is my third time in the last 4 months I have had problems with Apple.

    The screen looks completely normal besides the vertical white lines on the right hand side of the screen, as the "slide to unlock" is lighting up and the time and date are changing, but the screen is unresponsive. After several problems with Apple in the last few months (and two defective iPods including this one and one iPhone), I really don't want to go through the whole process of bringing it in or getting a new one entirely. It would greatly help if someone knows a solution, even if that would require completely resetting the iPod to factory settings, as I have had is synced to iTunes before. It would be greatly appreciated if someone could help. Thanks.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Seems like a bad digitizer or connection or logic board.
      Apple Retail Store - Genius Bar

  • Problems with Apple Photo Services

    I've been having problems with Apple's Photo Services. The first time, I'm pretty sure I didn't crop some pics correctly, but they were gracious enough to refund my $$. However, then I got serious about cropping in Aperture 2, and double-checked everything before submitting them. The 20 x 30s were fine, but the 16 x 20s were all screwed up. My $ was refunded for these, but I can't figure out whether the problem is mine, or in the transmission of the pics, or something that went wrong in the Photo Service. When I complain, they always send back a small pdf of what they claim they received, and it always matches what they printed. But that's not what I sent them.
    Anyone else have these problems? Might it be a bug in Aperture 2?
    Sean

    When I do a bulk export from Aperture 2, to anywhere, (flickr, Photoshelter, a set of files, gallery), randomly, (about 2 in thirty images are affected).
    The effect is stretched non-centerd cropping. I think it only affects random cropped images. Not all cropped images, but I am not sure about non-cropped images. ...
    The extra effort to go back to the export, after the fact, just to check up on the quality exported images is a waste of my time, but now made necessary.
    The thing that bothers me the most is that selecting the images that have been exported with the problem and then re-exporting those images produces, for me, the export I originally expected without the errors.

  • Problems with Apple Preview filled forms and compatibility with Windows?

    Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
    I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
    I don't know what version of Adobe Acrobat they were running.
    Thanks,
    kt

    You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
    It problem is probably not related to the user using anything in the Sign pane.

  • Problems with logitech headset

    Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

    Hi,
    As it has been so long I reread the topic.
    I am now confused though.
    In the first post you said
    ... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
    From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
    You then said it was the Output (incoming Audio) that you could not hear.
    I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
    You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
    I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
    Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
    Ideally iChat seems to prefer 44100
    You may also notice here that you have different controls over the volume.
    Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
    8:52 PM Tuesday; June 22, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)

  • Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard.  Has anyone seen this?

    We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4.  A clip with an alpha which keyed perfectly before the upgrade, now will not key.  If I convert the clip to the Animation codec, it keys perfectly.  If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas.  Has anyone seen this or have any suggestions on how to correct this?  Is it a bug? 
    Thanks,

    Motion 4.0.3
    It just doesn't seem to recognize the alpha at all. 

Maybe you are looking for

  • How to set up email for air print

    need help to set up air print, i believe i can give email address to a friend so they can print on my printer. I can already print wirelessly from my laptop and ipad

  • Regarding the run time analysis

    Hi All, To check the performance of the program, we will go to Run time analysis, in the utilities. In the analyes part consist of graphical representation of the ABAP, DATABASE and System. My Question is 'When we give small range of values in the Se

  • ESW: What are the roles assigned with CRM user in ESW?

    I would like to see the CRM from a Sales role and a marketing role

  • Console problem in Solaris 7

    Hi, I'm having a problem with the console in Solaris 7. I can open a session in terminal mode but I can't open a session in graphic mode. When I write the login and press the button, the screen is blocked and I have to kill the process from a remote

  • Live cache NOT running on MAxDB.

    Gurus: I just get into SCM recently and only read some docs about SCM. I believe the SCM I log in has not MaxDB at all.   It is running on a SQL exclusively. Could you tell me how to verify my guess? Thanks a lot!