Problem with startup - "black & white" matrix screen in macbook pro 2008

Hi guys, i am desperated to get some help for my macbook pro 2008 model. I couldn't start my OS at all by using safety mode or any other mode. If the mac just restarted itself without progressing to the main screen. If anyone know what is the problem (hardware or software etc...), please let me know.

Welcome to Apple Support Communities
This looks like a GPU or display problem.
Reset the SMC > http://support.apple.com/kb/HT3964 Reset the PRAM > http://support.apple.com/kb/HT1379 If nothing works, take the Mac to an Apple Store or reseller

Similar Messages

Problem with installing Flash player 14 in my Macbook Pro

I tried to install Flash player 14 in my Macbook Pro, however, it stuck at "retrieving install" screen, it is supposed to be a new version, anybody has the same problem?

Yes same issue. I even tried chatting with adobe support but they did not help as I am not a paid subscriber. I have seen many others with the same issue. I hope adobe is aware of this. am trying to contact them.

Internet problem with New Airport Extreme base and new Macbook Pro

So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
Danny

I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required.

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

Problem with reinstall Leopard or Snow Leopard on MacBook Pro

I want to reinstall my MacBook Pro. I tried with Leopard Install DVD but didn't work. Reset PRAM, didn't work, still grey screen...I have Snow Leopard upgrade DVD I can read, I was able to erase but when trying to install I got message it can't complete the operation...Help!

you could try booting from the backup (if the Safe Boot doesn't work), inserting the Leopard DVD and selecting the MacBook Pro as the destination.
The backup is a TM volume.
Marie: have a look at this for step by step instructions to erase and reformat.
http://pondini.org/OSX/DU1.html
The slowness may sometimes be the result of a failing drive. That first needs to be determined.
Does the Snow DVD look like this?
Message was edited by: WZZZ

Problem with Snow Leopard and LED Cinema Display + MacBook pro

I just upgraded to Snow Leopard. When I work on my MacBook Pro everything works fine. But when I use through the LED Cinema Display then the machine hangs on several programs, like iTunes, Time Machine, even Finder. Before the upgrade everything worked fine. Anyone having the same problem?

I've had similar problems when using my cinema display. I am currently using it with my usb backup drive disconnected and , so far, have not had the problems. Here's hoping, although it is not a good permanent solution, it means I do not have Time Machine running or access to my other backup files. I suspect that it may be a problem (as reported by others on this forum) with SL mounting a sleeping drive. Time will tell.

I set up a new router and the windows machines have no problem with connectivity. I go through the MacBook Pro's airport assistant and view my network and then enter the WPA2 password. I get back a message saying the password is incorrect when it is

I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!

If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.

Problems with emailing video from iPhone 4 to MacBook Pro

Hi all you helpful people,
I have taken some short videos on my iPhone, and have tried to email to my Macbook Pro. The email is received but there is not attached video.
I then downloaded the videos to iPhoto. The option to email the video does not come up at the bottom of the iPhoto screen. On File / Export it only brings up the options for exporting still photo files, eg jpeg.
I then dragged the video file to my desktop and opened a new mail message, and attached the video.
However, it won't send, the server times out. These are only short videos - some 5 sec long. I also can't now remove them from the quere to be sent on mail so everything is backed up behind them. Is there a way to clear them from the queue?
Surely it can't be this difficult? Am I missing something simple?
All help gratefully received!
Thanks.

Go to itunes. right click on your phone. select back up. It will copy everything to your computer.
Or you can read more about [how to transfer iPhone video to PC on Mac|http://www.softwarebbs.com/wiki/Howto_transfer_videos_from_iPhone_to_iTunes_onMac].
It can help you directly transfer iPhone videos to iTunes and manages iPhone on Mac.
Hopefully this works for all of you like it just worked for me!

Problem with MyBook Live and Time Machine on MacBook Pro

Hi,
I bought recently a WD MybookLive 2 tb.
The HD is connected to the modem and make backup from Macbook Pro 15 'with Time Machine.
Previously everything worked correctly, the Mac recognizes the disc and carried outregular backups, everything started to not work after the updates that were released by Apple on November 11 with software update - firmware on the My Book Live theMyBookLive 02.10.09-124: Core F / W
I get this error:
Time Machine can not complete the backup. The disk backup is not available.
Apart from Time Machine, yes, I use the MyBook Live, I load the disk where you are within the Public folders Shared Music, Shared Pictures, Shared Videos, and Software,I can easily copy files and copy them from there into to my computer - the My Book and'set a DHCP address.
Thanks

try this:
http://www.insanelymac.com/forum/index.php?showtopic=184462
or here
http://translate.google.com/translate?sl=it&tl=en&js=n&prev=_t&hl=it&ie=UTF-8&la yout=2&eotf=1&u=http%3A%2F%2Fwww.nervous.it%2F2009%2F09%2Fbackup-snowleopard-sha re-di-rete%2F&act=url

Problem with burning photo to a disk on MacBook Pro.

I am not able to burn photos from my iPhoto album onto a blank disk. Please someone helps!

I did find the information listed and I tried that. I t worked! Thank you for responding so quickly. What I did was to send photos to finder and burned them to a disk, and that worked perfectly. I am still learning the process. I never had any problems on my old Apple computer.

Weird problem with my Notes app on my new Macbook pro

I opend the notes app today and this is what i see:
Anyone know how to fix it???

I just managed to solve the problem.
I transferd today some font from my old pc, I had 4 duplicate fonts,
That's waht cosed the problem.
Thnks for the reply.

HT2801 Has anyone else had problems with the dvd player in pre unibody macbook pros?

My 2007 macbook pro has a skrewed up dvd drive. It doesn't seem to matter if the dvd is brand new or badly scratched: iDVD takes several minutes to pop up and several more to recognise that there is a disc present and several more to start reading it. Half the time the drive just spins the dvd around really fast and makes a lot of noise and gets the fans maxed out and then stalls and eventually decides to give up. After giving up on playing the disc it usually has a hard time deciding whether or not to eject the disc! I don't know if its just burnt out and needing replacing or if there is an inherent flaw in the manufacture/design of the drive. Either way it really irritating.

SuperDrives wear out - it seems that yours might be on the verge of a mechanical failure. I'd just replace it, buying a new drive from Other World Computing and installing it yourself (because Apple would charge a small fortune).
Clinton

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)

Good afternoon !
        We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
        When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
        If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
        What can be happening in this case ? What can I check to determine the cause and solve this problem ?
        Thank you in advance !
        Wilson

Good afternoon !
        This problem was solved adjusting some parameters of partner determination.

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Problem with startup - "black & white" matrix screen in macbook pro 2008

Similar Messages

Maybe you are looking for