Problem with status bar.

The status bar all the time change to white in the home pages!
and I can't see nothing!
p.s my background is white too.
What to do?

Hi aviadle,
If you are having issues with your iPhone's status bar showing only white, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

Big problem with status bar legibility in IOS 7.0.4

Hi, i'm adressing this problem to Apple. I recently update my iphone 4s to ios 7.0.4 and i have found some problems with status bar visibility in certain apps. Ex: in Photo app, the status bar is dark and it is unreadable, same in Lockscreen in Emergency menu, in menu when someone calls or you call someone and in Camera app the status bar is black and overlaps with the text and option buttons of the app. Please fix this as soon as possible because it is very frustrating.Sorry for bad english :d

There is no Apple hear in this user to user forum.
YOu can send feedback here http://www.apple.com/feedback/

Macbook stuck on apple screen with status bar

Macbook pro 17in stuck on apple screen with status bar
i have snowleapord
when i start in verpose mode it says this at the end:
invalid node structure
(4,38887)
** The Volume Macintosh HD could not be verified completly.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
fsck failed
kext loading now disabled.
Kext unloading now disabled.
Kext autounloading now disabled
Kernal requests now disabled.
Can't get kexted prot.
syncing disks... Killing all processes
continuing
done
CPU Halted
I havent tried re-starting from Start-up disk because I am not home for 5 more days and it is at home.
If anyone could help or tell me my problem or point me in the right direction i would apreciate it.
uploading image of verpose screen to flickr.. http;//www.flickr.com/photos/briannasue

The disk utility program has found an error and cannot repair it - Disk Utility is not able to repair the drive it has been booted from. You'll need to restart the computer using another disk - this is one reason why I always travel with an emergency DVD and a bootable external drive. Invalid node structure errors are non-trivial; sometimes Disk Utility will repair them and sometimes not. Disk Warrior has been my second line of defence for disk drive problems for years.

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

Installing Yosemite on iMac 2013 hangs with status bar midway

Trying to install Yosemite, but screen just displays a white screen with apple logo and the status bar is around 50 %
been running for about 4.5 hrs, will leave overnight, but then what if no joy.
I Thought that Apple was good over these types of things, it is a Apple iMac 27" 2012 machine with 8Gb Ram.
thanks
ian

If you use the power button to shut down and then restart does it boot?  menu/About This Mac - what is installed?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Problems with scroll bars in list view

Hello,
I am using Xcelsius 2008 (Build Number 12,2,166). I am still having trouble with scroll bars on my list view control. Other list views in my dashboard seem to be ok. It seems that this list view is not ignoring the blank cells in my excel file. I have gone through many things to correct this problem. I have added a new list view, I have copied other list views that work correctly but still no success. It seems that the "Ignore Blank Cells" property is not working correctly. Does anyone have a solution for this?
Much Thx!

Hi Yusufel,
Please check the data whether the cells are really blank or having any space which could not be seen, etc.
With best wishes
BaaRaa.

View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

Hi,
I wanted to create a view of Incidents which are linked to a Problem (any problem).
I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Problem with the status Active.
At this first test I didn't bother to select any specific columns to display but just went with the pre-selected ( Description, Display Name, Display Name) and it worked.
I got a list of expected Incidents in the view but having the Description column made it quite useless.
So, when I try to select the columns I find useful it will not update and it returns a No items found message instead.
(image removed due to limitations)
It is of course possible to group by one of the Display Name fields and collapse to get a more workable view but it still lacks a lot of good information. One would like to include ID, title, Created date,
date modified, Display Name for Affected User and Assigned to user, and a few others.
I was just a bit stumped as to why this fails when changing the columns on a view that obviously is possible to create.
Thanks in advance,
Daniel

Consider using the Advanced View Editor( or
the free edition), since it has much more robust criteria and column editing capabilities.

Grey start-up screen with status bar freezing and shutting down

Hello
I have a 13.1 MBP running 10.8.1 that is about 18 months old and when starting it up, it makes the traditional apple "ding" and then starts up with the little spinning wheel.
Then the status bar appears reminicent of when you install a firmware update and after 23 seconds, the MBP competely shuts down.
I have reset the PRAM, tried to start up from the disc, tried to start in Safe Mode and everything in between.
Nothing seems to remedy the situation.
Any thoughts would be most helpful!
Thanks!

Actually, you should hold the C key to start up from a Mac OS X install disk. Holding the D key boots into Apple Hardware Test (assuming you've got the right disc in). If both of those things fail, resulting in identical behavior, then it's likely to be a hardware issue.

DROID RAZR issues with status bar - Winamp

When i pull the status bar all the way down it is really hard to get it to stay locked. It just keeps flying back up to its normal position. Winamp is also borked

If your Having Issue Linking too Winamp an other Stuff with it you might Give this A Look an see if can Help Ya:
You need to install both the Winamp for Android and the latest Winamp Media Player for your PC.
Step 1::
On your Android device, download Winamp for Android.
Step 2:
When you initially launch the application you'll see a "Winamp Help" screen. Click on the "Wi-Fi Sync" button and following the onscreen instructions. If you don't see the Winamp Help screen, simply launch Winamp and from the Home screen press the Menu button (hard button), go to "Settings" and "Enable wireless sync".
Step 3:
Make sure your PC and Android phone are on the same Wi-Fi network.
Step 4:
From your PC, download & install Winamp Standard (free) or Winamp Pro (premium). Version 5.6 or later is required. Please note that Wi-Fi sync with Winamp for Android will not work with "Winamp Lite". After launching Winamp you will be prompted to "Add Media to Library" or "Import from iTunes".
Step 5:
From the Media Library tab, select "Devices" in the navigation panel (left-hand side of screen).
Step 6:
Your Android device should now be visible in the "Discovered" area of the "Devices" view. If not, click the "Discover" button. You'll also want to be sure that your device is not in sleep mode.
The "Discovered" view only indicates available devices. To sync with your device, you will first have to attach it.
Step 7:
To attach a device, double click on your device icon (or single click on the attach overlay button). This will send a pairing notification to your device.
Step 8:
After clicking "Attach", a notification will be sent from the Winamp Media Player to your Android device asking you if you would like to allow Wi-Fi pairing. Click allow.
Step 9:
Once you have selected "Allow", you should now see your device in the "Attached" area of the "Devices" view. Additionally, you will see your device name appear under the "Devices" node in navigation panel.
(Note: You only have to pair your phone once. After initial pairing, your device should automatically appear in the attached state. You may be prompted to pair again after upgrading to a newer version of Winamp for Android).
At this point your Wi-Fi set-up is complete and you are ready for wireless syncing.
Step 10:
Once your device is "Attached", mouse over the device icon and click on the "Sync" overlay button. Alternatively, you can manually drag and drop files in your "Audio" library to your device (pictured below).
You also have the option of setting up your Preferences by right-clicking on your device or by going to Options >> Preferences >> Portables >> [Device Name]. Learn more about sync preferences and settings.

Problem with status-button in item view of ME21/22/23N

Hello ABAP,
i have to check for some conditions when a PO is saved, and due to those checks either save it or well, not.
This is working fine so far.
when you click check, or save, conditions get checked and window with errors pops up.
I´m using the normal error message procession used in SAPLMEGUI which i have to fill with thos three makros.
I just have one problem, my status button in item line doesnt get updated. i tried with a lot of metafields by now but it seems trial and error is not the way to go here.
any tips?

requirement resolved.
solution follows:
DATA: lt_ytab             TYPE TABLE OF ysdch_vbap_idnlf,
      lt_data             TYPE TABLE OF ymmch_check_idnlf_out, "added ID (TYPE INT4) Field to structure
      lt_out              TYPE TABLE OF char80.
DATA: ls_ytab             TYPE ysdch_vbap_idnlf,
      ls_mska             TYPE mska,
      ls_data             TYPE ymmch_check_idnlf_out,
      ls_out              TYPE char80,
      lv_row_end          TYPE i VALUE 10.
CONSTANTS: lc_col_start        TYPE i VALUE 10,
            lc_col_end          TYPE i VALUE 40,
            lc_row_start        TYPE i VALUE 10,
            lc_title            TYPE char80 VALUE
            'Fehler, noch Bestand zu Liquidations/Annulationsaufträgen vorhanden'.
*~~~Get header data
ls_head = im_header->get_data( ).
*~~~Get item data
lt_items = im_header->get_items( ).
LOOP AT lt_items INTO lr_item.
ls_item = lr_item-item->get_data( ). "EKPO
"select liquidations/annulations orders for supplier material nr.
SELECT *
FROM   ysdch_vbap_idnlf
INTO   TABLE lt_ytab
WHERE /fis/idnlf = ls_item-idnlf.
LOOP AT lt_ytab INTO ls_ytab.
    "now lets see which of those orders has order stock
    SELECT SINGLE kalab kaspe
    FROM   mska
    INTO   CORRESPONDING FIELDS OF ls_mska
    WHERE vbeln = ls_ytab-vbeln
    AND    posnr = ls_ytab-posnr.
    IF ls_mska-kalab GT 0 OR ls_mska-kaspe GT 0.
      ls_data-vbeln       = ls_ytab-vbeln.
      ls_data-posnr       = ls_ytab-posnr.
      ls_data-/fis/idnlf = ls_item-idnlf.
      ls_data-kalab       = ls_mska-kalab.
      ls_data-kaspe       = ls_mska-kaspe.
      ls_data-meins       = ls_item-meins.
      ls_data-ebelp       = ls_item-ebelp.
      ls_data-id          = ls_item-id. "saved ID for later processing
      APPEND ls_data TO lt_data.
    ELSE.
      CONTINUE.
    ENDIF.
ENDLOOP.
ENDLOOP. " lt_item
IF NOT lt_data IS INITIAL.
"we got annulation/liquidation orders with order stock for this material
"so popup a error message
LOOP AT lt_data INTO ls_data.
    IF NOT ls_data-vbeln IS INITIAL AND NOT ls_data-posnr IS INITIAL.
      mmpur_business_obj_id ls_data-id. "using other makro now and making use of ID
      "using mmpur_business_obj_id instead of mmpur_business_obj_it
    ENDIF.
    mmpur_metafield mmmfd_item_number.
    mmpur_message 'W' 'YMMCH' '110' ls_data-vbeln ls_data-posnr ls_data-ebelp ' '.
ENDLOOP.
ch_failed = 'X'.
ENDIF.
Edited by: Florian Kemmer on Sep 7, 2010 3:22 PM

Problem with Stacked Bar Chart

I have a problem with a stacked bar chart in Numbers 09. My chart is a single series with 6 categories. All of the categories have different values. The first 5 categories display correctly. However, the last category does not display in the color its supposed to, but rather shows up as white/background instead of the grey color shown on the legend. However, the value label is displayed in the proper place.
When I select other chart types (pie, regular bar, or regular column) the category shows up like it's supposed to.
This is kind of annoying since I would rather use stacked bar instead of a pie chart. Is there an upper limit on the number of values it can display as a stacked bar chart? Is this just a bug? Thanks!

Here's my result with six values in a single series. I double clicked the last bar to change its colour from the default grey (which was visible) to magenta.
Numbers 2.0.3, iBook G4, OS X v10.4.11
(Shot in the dark:) Try double clicking the value label, then changing the order position of this item.
Regards,
Barry

Problem with SCROL BAR

In my form i have fields in tabelar view and i have scrol bar.
When the query has been executed, I want to see all of data in my form and I offcourse must to scrol down, but when I receive a lot of data my action with scrol bar occure system block, CPU time increase and I must to terminate(with end task) the aplication.
This happened, not allways, in Forms9i and Forms6i.
Is this some oracle bug or exist some developers trick to solve this problem?
Thanks, it's very imported to us!

this may be affected by many factors assuming your form coding is good.
you may first try to set the block's QUERY ARRAY SIZE to see if it helps. if you allows DML, then the DML arrary size too, but you need to balance them by many trials. In fact, if you get a powerful server/client machine, that helps too.

Problem with tool bar

Hi,
I have a problem with my illustrator CS5, the toolbar doesn't show sub-options.
For example if I click the Rectangle Tool (M) button looking for sub-options (a sub-option is for example the Ellipse Tool (L)), nothing happens. I managed to use the Ellipse Tool (L) through shortcuts, but I want my tool bar to be able to display all the sub-options.
In other words all the buttons with a little triangle at the button-right corner, are supposed to show sub-options, but they don't.
I've consulted the problem with one of my co-workers, he suggested installing it all again -> I don't wanna do that.
Please help.
Thanks in advance.

You have to click and hold the button. As an alternative you can alt-click it to cycle through the tools

Workflow problem with status Ready

HI,
I have a problem with the workflow not getting completed.
The workflow is for the employee attendace 20000081 .
After the manager of the employee accepts the leave application posted by employee , The workflow is in the following state: -
ID 000000340552 Work item type    Background step
Work Item text Find Employee .
Status <b>Ready</b>
Now the question is there any background job which needs to be scheduled for changing the all the workitem with status 'Ready' to be executed .
since once I execute this step manually then the workflow again goes in the ready status with the next step and the next step in this case is 'Create attendance/absence' This stpe of the workflow is in again status 'Ready'.
Please let me know if some know about this problem.
Thanks in advance .
Ankur

Hi ,
Thanks for the prompt reply.
I have tried the auto customizing and I am geeting the following log generated :
Auto-Customizing: General tasks
         E WZ:119 Instances for task TS60001307 already exist
Task TS60001307     not classified as general task
         E WZ:119 Instances for task TS70008037 already exist
Task TS70008037     not classified as general task
         E WZ:119 Instances for task TS70008125 already exist
Task TS70008125     not classified as general task
And while checking the customizing setting in SWU3 the folling entires exists but as I understand the seeting is proper, please have alook below:
An active plan version exists
     Workflow administrator maintained
     RFC destination: User locked
     Generic decision task classified completely
     Tasks for document generation fully classified
     T77* tables all available
     Monitoring job for missed deadlines is scheduled
     Monitoring job for work items with errors is scheduled
     Sending to objects and HR objects activated
     Entries missing in PD control tables
     Default Domain for Internet Mail Maintained
Workflow development environment
     Customizing incomplete
Prefix numbers for standard object types maintained
     An active plan version exists
     T77* tables all available
     Number range defined for customer tasks
     Entries missing in PD control tables
Please let me know if this is not proper .
Thanks and Regards,
Ankur

Problems with Menu Bar after recent security update

Ever since installing yesterday's security update I have been having problems with the menu bar. When clicking on the blue Apple in the upper left hand corner, no drop-down menu appears as it should. This problem also occurs in the drop-down menu named for the program in various instances (Thunderbird, Azureus, iTunes, Finder, Firefox) but not in others (Safari, Adium, VLC). Sometimes the menus are simply truncated and do not include all the options they should rather than not opening at all.
I have run Disk Utlity which found no problems and have performed a hard restart multiple times but the problem persists. Any advice would be very helpful. Thank you.

Thanks for the help. I tried most of the solutions listed in the link you supplied, but am still having the same problem. However, when I tried to run the Tiger Cache Cleaner, I got the following error message:
Runtime Error 4: Failed Assertion
Location: /Volumes/RBUS/Common/MacOs/MacOSMenu.cpp:420
Failure Condition: appMenu
Failure Message:
Please report what caused this error along with the details above.
Thoughts?

Problem with status bar.

Similar Messages

Maybe you are looking for