Problem with step 2 in user exit.

Hello collegues,
I have a problem with the variables user exit in the bex analyzer. I have created a variable user exit and this is used as user authorization, and this variables is optional and enabled to entry . When i debugg the user exit, i put the break point in the step 1, in the step 0 and in the step 2, i can check the step1 and 0 but in the step 2 don´t stop.
Why does this happen?
Thanks for your collaboration.

Variable enabled to entry are not are not candidate to step 2. This step is only called once per exit variable not enabled to entry.
Regards,
Fred

Similar Messages

Problem with HR module - user exit

Hi
My requirement is to have budget order checking before I save expense claims through PA30.
Here are the step I make :
- Transaction code PA30
- Enter personnel no
- Enter Info type 0015
- Create
- Enter wage type
- Enter amount (BETRG)
- Cost assignment -> enter cost center + oder number
- My requirement : (Need an exit to check budget of order number)
- Save
Please let me know if there's exit I can use.
Thanks,
Melissa

Please post this in HR FORUM.

I have a problem with ALV Grid User Command?

Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
                       us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
        WHEN 'ORDER'.
          IF NOT wa_final-order IS INITIAL.
            SET PARAMETER ID 'COK' FIELD wa_final-order.
            CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
          ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

hi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files? I know that is possible for email sent pics.

My bad, It was a Verizon problem. When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this. All messaging now works. Thanks for listening.

Problem while calling the user exit

Hi All,
In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUNCTION '001' IS written but after that it's not going inside the user exit. But if I put back the original FM , this suer exit is getting triggered and it's gong inside the exit. I've activated the Project for this user exit also. As per our requirement I've to copy the original FM into Z* FM.But my doubt is when I put back the original FM , this User Exit is getting triggered whereas when I copied this FM it's not working .
Anybody could helpme out why it's happening ?
Thanks
Alok

Srinivas,
Yes it's related to the other post where I had to copy one standard Function Pool.While copying the function pool I copied the FMs also.This problem is coming out of one FM ,when I changed this to Z* at the place where it is called, the user exit which is written inside that FM is not getting triggered even though program is reaching till the point where this user exit is called .
Any clue ?
Thanks
Alok

[SOLVED] Problem with .htaccess and user dirs.

Hi!..
I write here because i have a problem with .htaccess files and url rewrites.
I deployed a Cakephp[1] app in my /home/~asmerkin/public_html/books directory. This folder contains a .htaccess file with the following directives:
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteRule ^$ app/webroot/ [L]
RewriteRule (.*) app/webroot/$1 [L]
</IfModule>
My server works well in user directories but it fails to rewrite urls. When i go to http://localhost/~asmerkin/books/ apache returns 404 error. If i go to apache log i find this:
[Sat Sep 04 02:02:02 2010] [error] [client 127.0.0.1] File does not exist: /srv/http/home
So the .htaccess is working but the url it rewrites is not correct. My httpd.conf file is this file[2] and my httpd-userdir.conf is this one[3].
So i'd like to know if somebody can help me with this issue. I tried everything without results.
Thank you!
[1]: Cakephp.org
[2]: http://perkin.pastebin.com/g0dbbW2P
[3]: http://perkin.pastebin.com/fprNYCRY
Last edited by Perkin (2010-09-06 11:24:55)

Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

Problem with steps in health app!!

Hello guys, i have problem with my health app, i enable steps in the app but it doesnt count even a single step, it says "No Data". I searched in the Internet the way i can enable steps and did exactly what it says but nothing. Can someone help?

you can use 3rd party apps to monitor your activity, but this will drain you iPhone Battery significantly more than if using the integrated Motion coprocessor.

Problem with syncing AD users (LDAP)

I am running into a 'problem' with syncing users from ad. I'm pretty sure i'm doing something wrong but i can't figure it out.
When i sync manually the 'pop up' shows that it's synchronizing and after a few seconds it tells me "OK". But there are 0 users imported.
http://www.dualdude.net/bm/run_ldap_sync.jpg
The connection and credentials to access the AD work since they are also used for Zarafa and Samba AD synchronization. The AD is running on an Windows Server 2008 Enterprise x64 machine.
This is a screenshot of the configuration used:
http://www.dualdude.net/bm/ldap_config.jpg
Any thoughts on what i'm doing wrong?

I got the same problem when using groupfilter:
User Filter: (&(|(objectClass=Person)(objectClass=orgPerson)(ob jectClass=inetOrgPerson))(groupMembership=cn=users ,ou=org,o=firma))
Group Filter: (&(|(objectClass=group)(objectClass=groupOfNames)( objectClass=groupOfUniqueNames))(|(cn=G4)(cn=TC*)) )
Do you use groups for the allowed users in teaming?
>>> lnijhuis<[email protected]> 14.01.2010 16:36 >>>
Thank you for your reply. I guess the comma's should be right. When i
change the first "ou=" in the Base DN to "cn=" the error message states
that the best it can do is reach
ou=OrganizationalUnit,dn=domain,dn=local. So i guess that shouldn't be
the problem?
By default there is a container "Users" in AD, which we don't use. The
person that configured the server created an OU on the same level as the
default container. THe name of this OU has a space in the name, like
"Organi Zation". This OU contains another OU called Users. This is where
the users are located. When i run the ldap query i don't get any errors
about the base DN. It does when i change it.
The full filter is:
(|(objectClass=Person)(objectClass=orgPerson)(obje ctClass=inetOrgPerson))
lnijhuis
lnijhuis's Profile: http://forums.novell.com/member.php?userid=63756
View this thread: http://forums.novell.com/showthread.php?t=397993

Gradient problems with stepping single and full colour

Hi, just wondering is anyone else is having problems on printed
jobs with the gradient having definite steps between the
different tints. We had no problems with CS3, but since updating to CS4 we
have had jobs showing this stepping problem. Has Indesign changed settings?
Any help would be appreciated I have checked all the the PDF settings as our RIP works from the PDF's to create the plates. The RIP is a Harlequin Rip.

GrahamHe wrote:
We don't actually rip the files. We are a pre-press/production department in an Agency. We do ensure that the files we deliver to the printer are 100% clean. Our problem with exporting is that if you have a gradient, as InDesign splits up large images into small pieces when writing the PDF we have seen single images that have different resolutions. We even had one file where 99% of the image was 350 dpi, and a small part 100 dpi.
It could be that CS4 has fixed these problems and am willing to try it out, but am very wary of exporting.
InDesign only splits things up when you flatten, as far as I know. If you use an unflattened format, PDF1.4 or higher, there is no flattening, so the problem may well be in HOW you are exporting. Of course, it sounds like you do ads, and I send flattened ads to publications myself because I don't trust that they know how or have the technology to handle a proper transparent PDF, but I don't distill, and I try to avoid situations that would cause problems to begin with.
Take a look at the Transparency Flattener Preset you are using when you export. I believe the default is [Medium Resolution] which has a gradient resolution of 150 ppi. If possible, save your distiller settings as a .joboptions file and use that to export the same file and compare the distilled and exported versions.

SYSDBA - problem with viewing other users package body texts on sys account

Hi,
SQL Dev 1.0.0.15.27 has problem with correct display of other users package body texts on sys account. All bodies have "create or replace" text instead of all pck. bodies text.
I guest it's problem with SYSDBA role. On system account text is displayed correctly. Quest SQL Navigator 5.x has no problem with this. Any ideas ?
Regards,
MM

Hi Everyone,
Just so I can close the case on this issue, although I was successful in
using CSS to resolve the issue, actually, the issue was not really
resolved. There was (for me) still the problem of rollover images not
working in IE, and if I were ever to get another good night's sleep, I
would need to resolve it -- so I did. Recall me saying earlier about the
sizes being brought in to the javascript code by Dreamweaver? The original
issue with having the size of the small image in the code caused the code
to see the larger image as small also! However, when I deleted those size
attributes' numbers, I failed to delete the words "width" and "height"
along with the double quotes following each. So, while the other browsers
ignored these "blank" attributes within these double quotes, IE apparently
didn't, reading these "blank" values as some very small value, thus
displaying the image in the absolutely smallest size possible! Wow! When I
removed these two blank attributes, my problem went away! Live and learn!
So, to all who were desperately trying to assist me, please accept my
deepest and most sincere apologies. All the while I was blaming IE, I was
the guilty one!!! Shame on me, and thanks for the wonderful responses I
received from the Dreamweaver forum team. I will go and stand in the corner
for 8 hours with my dunce cap on...
Joe Dardard

Problem with table called User?

Hi!
I get the following error message. The error is that there should be a
space after the table name.
com.solarmetric.kodo.runtime.FatalDataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (null, '[email protected]', 'Mr.',
'com.everwhere.idiomatica.app.security.User', 0, 0, 'Admin', '**admin**',
0, null, 'admin', 0)]
[PRE=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)]
Syntax error or access violation: You have an error in your SQL syntax.
Check the manual that corresponds to your MySQL server version for the
right syntax to use near 'User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX,
JDOIDX, JDOLOCKX, [code=1064;state=42000]
Shouldn't the
com.solarmetric.kodo.impl.jdbc.DictionaryClass:
com.solarmetric.kodo.impl.jdbc.schema.dict.MySQLDictionary
setting know how to write the sql statement? or is it a problem with the
table being called user?
Thanks,
Nic.

It is fully dependent on your kodo.properties file:
See:
http://solarmetric.com/Software/Documentation/2.5.0/docs/ref_guide_conf_kodo.html#com.solarmetric.kodo.impl.jdbc.DictionaryProperties
On Wed, 18 Jun 2003 14:52:02 +0000, Nic Cottrell wrote:
Hi Stephen!
I changed the table name and everything works. As far as the InnoDB table
type goes - why does the schematool with ant build MyIsam tables if we
should be using InnoDB type tables?
Nic.
Stephen kim wrote:
I'm not 100% sure as I personally haven't played with mysql recently,
but I would suggest moving to a different table name as IIRC, it is
reserved for MySQL access info. If that doesn't resolve the problem, we
can reinvestigate the situation.
Also, be sure to use InnoDB table type if you expect any transactional
integrity in MySQL (see our docs)
On Wed, 18 Jun 2003 09:54:10 +0000, Nic Cottrell wrote:
Hi!
I get the following error message. The error is that there should be a
space after the table name.
com.solarmetric.kodo.runtime.FatalDataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper: [SQL=INSERT
INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX, JDOLOCKX,
LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (null, '[email protected]', 'Mr.',
'com.everwhere.idiomatica.app.security.User', 0, 0, 'Admin',
'**admin**', 0, null, 'admin', 0)]
[PRE=INSERT INTO User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX, JDOIDX,
JDOLOCKX, LASTNAMEX, PASSWORDX, PREFERREDLANGUAGEX, STATEX, USERNAMEX,
WANTSNEWSX) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)] Syntax error
or access violation: You have an error in your SQL syntax. Check the
manual that corresponds to your MySQL server version for the right
syntax to use near 'User(COUNTRYX, EMAILX, FIRSTNAMEX, JDOCLASSX,
JDOIDX, JDOLOCKX, [code=1064;state=42000] -----------
Shouldn't the
com.solarmetric.kodo.impl.jdbc.DictionaryClass:
com.solarmetric.kodo.impl.jdbc.schema.dict.MySQLDictionary
setting know how to write the sql statement? or is it a problem with
the table being called user?
Thanks,
Nic.
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

Trying to print says " problem with adobe acrobat/reader exit try again help?

I keep trying to print a document, which has been working up until today, it has to be in PDF format to print, but when I push print a box comes on the screen and it says "there is a problem with adobe acrobat/reader, please exit adobe acrobat/reader and try again. What do I do? Thank you

Hi tanjam38435898,
Please refer this thread Links as it seems relevant to your query : Re: Error Code 0:104
hope that helps
Regards,
Rahul

Problem with sorting involving user defined types and reports

Hello!
I have a problem with sorting involving Reports and user defined objet types.
I have created the following object types
CREATE TYPE type_balance_compte AS OBJECT
NUM_CPT_SEQ NUMBER(8)
,NUM_CPT VARCHAR2(35)
CREATE TYPE TB_type_balance_compte IS TABLE OF type_balance_compte
At the reports query I use:
SELECT ...
FROM table(cast(test_pkg.balance_comptes(:P_num_soc) as TB_type_balance_compte)) c
The procedure balance_comptes will retrieve data from various tables into the type.
The report is ordered by a certain string field that usually contains characters and numbers.
I need to have numbers always before characters, meaning the data should come in this order in the report for example:
0
1
A
B
So, before the report query, I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) to guarantee NLS_SORT in case it is originally set to FRENCH.
The problem here is that even after this call, I have the report ordered like this
A
B
0
1
And not the numbers before as it should be.
To try and find out where the problem was, I have created a table to use instead of the object type described above. In this case, it worked correctly. So all I know by now is that is has something to do with the type or cast, but what exactly? Does anybody now how to solve this without using a table?
Many thanks
Ariadne

I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) why not order directly then:
SQL> select *
      from table (sys.dbms_debug_vc2coll ('A', 1, '5', 'C', 'a'))
order by nlssort (column_value, 'NLS_SORT = binary')
COLUMN_VALUE
1
5
A
C
a
5 rows selected.?

Serious problem with TSCAL per user Licensing (Event 4105 on Licenseserver)

Hello,
i've got a problem with Terminalservice-Licensing: We migrated our AD from W2003 to W2008. At the same time, we updated our Terminalservice-Licenseserver to W2008 (Memberserver, no DC). We are using per-user TSCAL licensing. The problem is, that for (nearly) every user that logs on to a W2008 Terminalserver, an event 4105 is generated in the eventlog of the Licenseserver, that means that the licence server cannot update the ad user properties when he delivers the cals.
We have discovered that the terminalserver-licenceserver group is under the security properties of the user listed but has no rights. For new created users the rights "terminalserver-licenceserver read/write" are correctly set and for those users no event 4105 is generated. The problem is, that License-reporting (usage) is only working for those newly created accounts and not for old ones. Why doesn't the terminalserver-licenceserver group have the rights to modify the Terminalserver-AD attributes for older accounts (these accounts were created when the domain-level was W2003)??? Is there a workaround or hotfix from Microsoft to correct the securitysettings ??
Many thanks
Ralf

Hello Ralf,
Thanks for your post in our forum.
Based on my understanding on your post, you have met the following issue:
You have migrated the Active Directory domain from Windows Server 2003 to Windows Server 2008; You have also upgraded the Terminal Server License Server from Windows Server 2003 to Windows Server 2008. After that, when the existing terminal users access the Terminal Server, an Event ID 4105 is logged to claim that the License Server fails to update the AD user’s properties.
According to the analysis on the second paragraph of your post, I think it is a known issue caused by insufficient permissions of the migrated users created in Windows Server 2003 domain environment. As you’ve found, the permissions required are for the Terminal Services Licensing Servers
group:
· Read Terminal Server license server
· Write Terminal Server license server
To fix this issue, please give these two permissions to the existing users.
After that, please confirm if the License Usage Report is working for the old users.
For more information about Event ID 4105, please refer to:
Event ID 4105 — Terminal Services Per User Client Access License Tracking and Reporting
http://technet.microsoft.com/en-us/library/cc775179(WS.10).aspx
Please feel free to let me know if I can provide any further assistance. Thank you for your cooperation.
Lionel Chen
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]

Problem with step 2 in user exit.

Similar Messages

Maybe you are looking for