Problem with Stock Transfer Order in Sales
Dear All,
The problem is related to STO where we have used the following configuration settings -
PO Document Type - ZUB (from standard UB)
Delivery Type - ZNL (from standard NL)
In the delivery type the assigned Sales Order Type - ZDL (from standard DL)
In delivery Item Category assignment is NLN which is a SAP standard.
In the outbound delivery we have the procedure of automatic batch determination active as a result of which two lines are generally reflected in which there is a Batch Header line with zero quantity & there is a Batch Item line with target quantity.In case of our commercial invoice only the single line i.e. batch item line with target quantity gets reflected & upon saving accounting document gets generated.But in case of STO Proforma invoice where there is no scenario of accounting the Batch Header Line with zero quantity along with the batch line item quantity is also getting copied.
In copying control TCode- VTFL the Settings between delivery type ZNL & STO Proforma Billing Type ZBST ( Copy of F8 standard bill type) for Item Category NLN in our system are as follows -
Copying requirements 009 DlvRel.proforma header
Data VBRK/VBRP 003 Single invoice
Billing quantity B
Pos./neg. quantity Blank
Pricing type G
PricingExchRate type Blank
Cumulate Cost - (greyed out)
Price Source Blank
Please suggest what needs to be done so that only the single line containing the batch line item with target quantity in the STO Proforma Invoice.
Thanks & Regards
Priyanka Mitra
In VTFL, for main item category (NLN), in the field billing quantity maintain value G-Cumulative batch quantity minus invoiced quantity and for the batch split item category, keep value blank. Then test by creating new documents. Also refer OSS Note 77414 - Billing during batch split, which explains for normal item category. You can refer the settings for your scenario also.
Regards,
Edited by: Shiva Ram on Feb 8, 2012 8:52 AM
Similar Messages
-
Consuming Forecast PIR (MD61) with Stock transfer Orders
Hello,
We have a Production Plant 1000 in which we load the sales forecast as PIRs (MD61) (we use strategy 10)
We sell from Plant 1xxx.
After production in plant 1000, we use Stock Transfer Orders to transfer the production stock to Plant 1xxx
From plant 1xxx we ship to out customer (normal sales process with shipping).
The problem we are facing is the following:
The stock Transfer Orders (STO)during a month do NOT consume the forecast loaded in plant 1000! There is no asignment to PIRs!
If I create a regular sales order in plant 1000 (which is not our normal process!), the Sales order quantity is automatically asigned to the PIRs to consume the forecast.
The same thing we want to acomplish with STOs.
I looked at Requirements Type KSL with Requirements Class 030 (from the strategy 10) but I can not make out were to manipulate it so it will work in our specific situation.
Anyone has done this before or had a similar situation? How did they solve it?
Thanks for any help on this one.
AartAart,
I would assume your STO is created in plant 1XXX. So that would create a dependent requirement/reservation on plant1000.
Since PIR is in plant 1000, it should consume your PIR by using consumption indicator 3 (Consume customer reqmts, reserv., dependent reqmts).
You may not have to use consumption ind 4 ( using BADI). Hope this helps too.
Else Brahmankar's solution is the last resort.
Thanks,
Ram -
Planning Strategies 10 and 40 with Stock Transfer Orders for consuming PIRs
Hello,
I have the following situation in a Client:
One Production Plant (1000)
There exist various Plants to sell products.
The production Plan (PIRs) I create in Plant 1000 (MD61). Monthly buckets.
The planiing strategy I want to use is 40 or maybe 10 (both to Stock).
Consumption of the materials in plant 1000 is via:
1. Stock transfer orders to other plants (with Shipping funcionality) (about 80% of the shipping form plant 1000)
2. Sales Ordes with shipping (10%)
3. Transfer postings from one plant to another (303 - 305 movement type) (10%)
How can I make sure that all these outgoing movements from plant 1000 do consume my forecast? Is this standard funcionality.
Thanks for any reply,
AartHello Mario,
Thanks for your answer. I looked at the note but Im not sure it does apply in our situation.
Let me explain our situation maybe more clearly:
I want to create a monthly Forecast (MD61) with PIRs for Production Plant 1000. (Planining strategy 10)
The stock created in plant 1000, on the basis of this forecast is consumed during the month by:
1. Stock Transfer Orders (from plant 1000 to plant X) - (for 95%)
2. Sales orders (directly) (5%)
The STOs should not be on top of the PIR but should be part of the PIR.
For your information, the stock which is moved from plant 1000 to plant X via STOs, is sold at plant X (not directly at plant 1000).
this stock sold monthly at plant X however, is considered withing the forecast!
I hope this clarifies our situation a bit more.
Thanks for any anwer,
Bye
Aart -
Rule Based GATP with Stock transfer order
Hi Experts,
I have activated the rule based with stock transfer GATP, but I have the following two issues
1. when I change sales order in EEC and make a ATP check , the system will not conisder the previous created stock transfer requisition and create a seperate stock transfer requisition, that is, if I trigger 10 times ATP check, the system will create another 10 stock transfer requisition. does anyone know how to let the system delete the previous stock transfer requisition , then create a new one, or using the existing stock transfer requisition?
2. the generated stock transfer requisition is always firmed, it causes if the sales order is deleted, the system can not delete the requisition via heuristic. how to let the system generate unfirmed stock transfer requisition?
thanksRick,
I have never researched this, so I don't know.
The reason I have never looked at this is because I would never want any other process to change supply elements generated by the GATP process. Once these elements are disturbed, then the confirmations of the Sales orders are also open to be disturbed. Regular runs of BackOrder Processing, which accompany most ATP solutions, can then change the sales docs with unpredictable results. Even without BOP, the next Sales person who re-ATPs the order might be in for an unpleasant surprise.
Best regards,
DB49 -
Problem with Stock Tr. order delivery
Hi,
I created a Stock transport order for plant A to plant B, then created a delivery and did all the requirements (TO and PGI) but when I go to the process delivery list (VF04) my delivery is not shown...
Status on delivery is complete.
I mark inter-company and delivery related.
Any ideas?
Ryanstock transfer with billing is only possible for plants belonging to different company codes.
You cannot bill yourself, nor pay yourself, does not really make any sense, except for faking the sales figures.
Please see one of the best selctions in help.sap.com:
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm -
Linkage of service order with stock transfer order
We are creating a service order for freight rate against a vendor xxx. While creating STO we assign vendor as CR (role) forwarding agent. Can we link that pricing condition of freight should pick rate directly from the ervice
Hi,
In service order components tab....make the item category as N-Non-stock item...
once u save the order ,system will generate the PR ,w.r.to that create STO.
maintain PIR ...so that system will pick value.
Regards
raj -
Problem with stock transport order account assignment
hi gurus,
I've a situation in ECC 6.0 environment in regard to STO that I hope you can shed some lights.
We're doing an upgrade from 4.6 to ECC6 and I'm doing some preliminary tests in the new box and I'm getting KI235 error message "Account xxx requires an assignment to a CO object", when I try to posts goods issue from the delivery document. When I assign a dummy cost center to the cost element, I can post the document and I get a CO and SPL accounting documents. In 4.6 there is no accounting document generated as the result of goods issue and this is what client wants. I've checked the release notes and OSS as well checked the setting for automatic account assignment in MM but I couldn't find any difference. I need to add that the material that I use is non-valuated but there is an accounting view for the material with valuation class. I'm just baffled that the goods issue for the same materials in 4.6 works without producing accounting documents but it doesn't work in ECC.
Any suggestion is greatly appreciated.Hi
If the material is non valuated then the accounting view should not be present, by mistakenly may be you have maintained the accounting view for the material type & maintined the accounting view in Material master.
If you dont want the accounting document generated, then you need to first de-select the accounting view for the material type & make the material as non valuted by removing the flag on Value update for the Plant.
now create anew material & test the transaction, if you want to use the sam eold material then make the Moving average price of the material to zero first & then change the Price control to S. & Test the transaction.
Thanks & Regards
Kishore -
Release order for a stock transfer order in Product view
Hi Experts
My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order, Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
One more thing i am not even selecting any selection profile for Product view.
What i need to check, Kindly suggest.
Regards
G CHi G.C
Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
Try the above steps and do let me know if it worked.
Regards
KRN -
STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319
Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
JoãHi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik. -
Combine stock transfer orders with different delivery dates into 1 delivery
Hello,
In transaction VL10B, the system normally combines stock transfer orders that have the same ship-to-party and same delivery date (if the combination indicator in the customer master specific to sales and distribution is checked). My business requirement is to combine stock transfer orders that have the same ship-to-party but different delivery dates. Is this possible through standard configuration? Is there a user exit that can allow this?
At the moment the system is creating different outbound deliveries according to the delivery dates specified in the stock transfer orders.
Please advice a solution.
Regards,
FelipeFelipe, please have a look at OSS note 386340, it may help to solve your problem about combining STO items with different delivery dates to one delivery (as I understand the code correction overwrites the delivery dates...).
Edited by: Csaba Szommer on Jan 21, 2011 5:06 PM -
Problem on creation of Outbond Delivery for Stock Transfer Order
Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
AndreaDear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea -
Stock transfer order (STO) Without delivery and With delivery?
Hi experts,
Could any body explain step by step procedure
Stock transfer order (STO) Without delivery and With delivery?
Thanks
ReddyHi
Stock Transport Order Without SD Delivery.
U dont have to maintian sales view for the materials.
1. Extend the material to those 2 plants.
2. Create UB purch document.
3. Goods issue wrt to the STO in the supplying plant ( 351 mvt type).
4. Good Receipt in the receiving plant ( 101 mvt type ).
5. Invoice verified (MIRO).
U should have specific pricing procedure for STO. In MEK0 u have to choose the appropriate pricing procedure with the accrual key linked for freight charges.
Vishal... -
Difference between Sales Order and Stock Transfer Order(STO)
Hi Gurus,
What exactly is a diference between Sales Order and STO?
Thanks and Regards
RohitHi,
Sales Order Stock
Sales Order Stock are stock with Special Stock type E. It can fall into the usual stock categories such as unrestricted, blocked etc. but "belongs" to a sales order. For example, you create a sales order for a part and assign a sales item category that generates an individual requisition, the requirement has an account assignment linking it to the sales order schedule line, you convert that requisition to a Purchase Order.
When you receive the Purchase Order, the stock is placed in sales order stock. It will show against the sales order/sales order line. It can only be delivered against that sales order line. Any availability check etc for that material on any other sales order will not take it into account as it is not available except to the sales order line the stock is assigned to.
Stock Transfer Order
the cross company Stock Transport Orders can be done by:
- Configure using transaction OMGN
- Depending upon the sending and receiving plants, maintain sales organization and customer data in customizing.
- Maintain the supplying plant as a vendor and attach the plant to the vendor in the Vendor Master.
- Material type has to be HALB or HAWA.
- Ensure that the company with sales Organization has a plant to take care of stocking.
- The PO used is NB and not Stock Transfer PO.
Configure SD for inter-company billing to enable picking up the pricing procedure for billing.
- Carry Out delivery through process delivery due list and billing through process billing due list.
Otherwise, You need to configure your Stock Transport Order settings for your Cross-Company:
Business Transaction to work.
1. Customer No. for the Goods Receiving Plant - OMGN
2. Availability Check- Checking Rule (if necessary) - OMGN
3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
4. PO type (which i belive you have done) - OMGN
5. Assign Vendor No. to the Supplying Plant (done) - VK02
6. Assign Customer No. to the Purchasing Plant for the Inter-Compnay Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
***and by the way for the Invoice to work between Cross-Compnay Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure.
REgards,
vineela -
Intercompany Stock transfer order with excise
Hi,
Can anyone tell me about Intercompany Stock transfer order with excise step by step.
hoping to repluHello,
Create Stock Transport Order - ME21N
Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
Regards
Mahesh Naik -
Good Receipt with reference to delivery or stock transfer order
We have a stock transfer order between two plant. Requirement is as under.
Steps - Supplying plant is creating stock transfer order, doing delivery with reference to STO by VL10B.
Receiving plant is doing Good Reference with reference to delivery or STO t code MIGO.
Now the requirement is if A Plant is supplying 100 nos, at the receiving plant it should not allow less then 100 nos. it should give error that qty is not match with delivering qty.
Thanks in advance
Samir BhattHI,
You mean to say that STO quantity must be equal to GR quantity or else system should throw an error
After STO and delivery PGI is done.
Then GR is made with refernce to STO.
Regards
KK
Maybe you are looking for
-
Mid 2010 MacBook Pro i7 - Crashing - Low $ - HEELLPP
My mid 2010 Macbook pro 15" with i7 running 10.85 has recently started crashing. I've really only used it extensively for the last 2 years so it's been doing quite well but has now started black screening then rebooting with no - at least not apparen
-
How to genarate performance monitoring report in SAP PI automatically
Dear All, I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI and send it to business users. As per my understanding, this can be achieved by pulling the data every month from the
-
After Mountain Lion upgrade iMovie crashes when uploading movie to You Tube
I also found upgrading to Mountain Lion slowed my mid2009 MacBook Pro 13" down. I just upgraded my memory from 2 to 8GB and it is running much better. One glitch I'm having since the upgrade is when I try to upload a movie from iMovie the program cra
-
BBP_WFL_SECURITY
Hi SRM Gurus, I would like to know if BBP_WFL_SECURITY settings are only relevant to Shopping Carts or it works for PO Workflows in extended classic scenarios also. Currently in my case we are on an extended classic scenario. As a buyer, I am able to
-
hi