Problem with substitution variable

Hi All,
I am facing problem with usage of substitutiion variable. I have following code in my script
Edited by: Tarak on Mar 4, 2009 3:27 AM

sorry I missed the script.
create table tempdata
(description varchar2(200))
TABLESPACE &tspacename
/Sqlplus is not asking for the value of tspacename.I am getting following error.
TABLESPACE &tspacename
ERROR at line 3:
ORA-02216: tablespace name expectedI am not sure what is wrong with SQLPLUS setting.Can anybody help?

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

Problems using substitution variable in Web Analysis

Dear all,
I have a Web Analysis report that I need to show a raking table with the current month.
For that I create a variable in Essbase that is updated with that date (E.g.: varCurrentMonth).
After that I use it as my substitution variable to filter my date dimension in a report data source (E.g.: Scr5, row: product, column: date dimension & measure):
2008 (current month)
Product $ qty.
AAA 100 10
BBB 90 7
CCC 80 5
The problem is that in our cube we need to use an alias in every dimension not to have duplicate members (E.g.: DT.Date, MS.Measure, PD.Product, etc). And when we use it we need to set up the variable in Essbase using that alias (E.g.: DT.Feb/05/08). And if we use that variable as a substitution variable in the report data source the label displayed is the DT.2008 and not 2008 as expected.
Does anybody have an idea how to solve that?
Many thanks,
Thiago Gabriel

You usually get this error message if you are trying to assign a value from a sub var to a member that does not exist.
e.g. trying to put FY08 which is a year member against a period dimension
or trying to use a sub var of FY09 which does not yet exist in the essbase, so say you added a new year in planning FY09 and used the sub var in the form but have not refreshed the database then it would fail because the year would not have been pushed down to essbase yet.
or the value of the subvar does not match a member name exactly
or using a sub var name that does not exist in essbase, e.g. using &nextYear but the sub var has not been created in essbase.
You can definitely use subsitution variables in columns in the version you are using and prior version.
Cheers
John
http://john-goodwin.blogspot.com/

Pb to setup replicated partition with substitution variables

Dear all,
I have the following problem with the replicated partition by using the substitution variables :
I would like to create a replicated partition using 3 substitution variables: &CurrPeriod, &CurrWeek, &CurrYear. The goal of this is to be able to copy data from application SourceApp to TargetApp every week, by changing the subst variables.
The script I have created is :
login useradmin identified by password on EssbServer
alter application SourceApp load database SourceDb
alter application TargetApp load database TargetDb
create or replace replicated partition SourceApp.SourceDb
Area ' "Account1", &CurrPeriod, &CurrWeek, &CurrYear, "ND_DISTRI","ND_PAGE","ND_PROD","VT", "REEL", "EUR" ' SourceArea
to TargetApp.TargetDb at EssbServer as useradmin identified by password
Area ' "Account1",    "M_N",     "S_N",     "FY1" , "ND_DISTRI","ND_PAGE","ND_PROD","VT", "REEL", "EUR" ' TargetArea
+     mapped TargetArea ("&CurrYear") to ("FY1")+
+     mapped TargetArea ("&CurrWeek") to ("S_N")+
+     mapped TargetArea ("&CurrPeriod") to ("M_N")+
+     update allow;+
refresh replicated partition SourceApp .SourceDb to TargetApp .TargetDb at EssbServer all data ;
The issue is that this is not working. I don’t see any data when launching the Maxl script even if the script syntax is validated by essbase. The very strange thing is that when I replace the substitution variable by members, this script works fine, I see my data in the target cube. For example if I replace the subst variables by
Area ' "Account1", “Month1”, “Week1”, “Year1”, "ND_DISTRI","ND_PAGE","ND_PROD","VT", "REEL", "EUR" ' SourceArea
to TargetApp.TargetDb at EssbServer as useradmin identified by password
Area ' "Account1",    "M_N",     "S_N",     "FY1" , "ND_DISTRI","ND_PAGE","ND_PROD","VT", "REEL", "EUR" ' TargetArea
+     mapped TargetArea (“Year1”) to ("FY1")+
+     mapped TargetArea (“Week1”) to ("S_N")+
+     mapped TargetArea (“Month1”) to ("M_N")+
So my conclusion is that there is something wrong with the syntax of the substitution variable in my mapping.
Your help on this would be very appreciated .

Hi,
I have the answer from Oracle support :
Hello,
This is a known bug.
BUG 7418041
This has been documented as a known issue in Essbase Release 9.3.1.3 with the following description: "Partitioning. Using substitution variables in replicated partition mappings incorrectly prevents data from replicating. [7418041]"
Currently the development team are working on a fix, but we don't have a release date yet.
The suggested workarounds are to use member names (which you have confirmed work) or use a Transparent partition in place of a replicated partition.

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

Creating a range with Substitution Variables for Report Script

Is it possible to create a range with substituion varables for use in a report script. For example instead of listing "Jan" "Feb" "Mar" "Apr" in the report script can I use a sub varaible like Jan:Apr that will list them all out?

while I have not had luck with ranges in report scripts, others have. You could have a substitution variable the is "Jun" "Jul " "Aug" or whatever you want the members to be. and it will replace jusr fine

Having problem with setting variable on a textfield

I'm using createTextField to create a textfield. I have also created a input textfield with a variable called textline1 (I don't create the inputfield with as).
I want to display the letters in the created textfiled that I'm typing in the input field. So this in my AS coed:
_root.createTextField("text1",1,100,100,300,100);
text1.variable = textline1;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = 50;
format1.bullet = false;
text1.setTextFormat(format1);
but it doesn't work. So anyone see the problem?
(sorry for bad english)

i think you're going to have more problems if you continue using textfield variables. you should not use them. just use the text property of the textfield to reference its contents.
but, if you want to continue, use:
var tl:MovieClip=this;
fontsize=20;
myInputText_txt.onChanged = function(text1:TextField) {
_root.myText_mc.createTextField("text_txt",1,100,100, 100,100);
_root.myText_mc.text_txt.variable = tl["text2"];
text2=text1.text;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = fontsize;
format1.bullet = false;
text_txt.setTextFormat(format1);
p.s. please mark this thread as answered.

Multiple Insertion with substitution Variable

Hi, I want to insert multiple values with single substitution variable in single column. I mean my query is as under.
Add a column to infobb02 called 'Wife' and populate it with first names. If there is no wife, enter null. Write a PL/SQL loop to gather wife names from the 'user' using a substitution variable.
That means I have to insert values of wife column by user using substitution variable and must be use loop.
Thank you.

You'll need a client application capable of prompting. Maybe a shell script or perl? Java? PL/SQL executes on the server and can't prompt.

BI 7 Upgrade - Problem with Authorisation Variable on Compounded Char

Dear All,
We have just upgraded our DEV environment from 3.5 to BI7 and have encountered a weird problem with 1 of our authorization variables.
Our authorization check variable checks the values from a table that the users are allowed to use (which includes the selection screen). There are 2 variables 1 for the uncompounded char and 1 for the compounded char, the uncompounded variable is working just fine but not the other. When the user tries to pick a value, they are presented with not just their restricted list but ALL the values.
Can anyone explain this? Has BI 7 changes the way authorizations work with Compounded Characteristics ?
Before anyone asks, these variables work just fine on 3.5 and are working just fine in our QA and PRD environments.
Help required urgently.
Thanks
Craig

Hi,
Yes authorisations in BI 7.0 are a bit different from the ones in BW 3.5. Here is the link which will help you know every thing in BI 7.0
bw 7.0
Regards,
Habeeb
Assign points if helpful.

Problem with substitution variable

Similar Messages

Maybe you are looking for